3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Flash instructions for printrboard (#2278) 

Signed-off-by: Georgios Karnas <kargeor@gmail.com>
This commit is contained in:
Georgios Karnas 2019-12-17 07:03:57 -08:00 committed by KevinOConnor
parent abf493496c
commit 9c25f42f4a
1 changed files with 6 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
config/generic-printrboard.cfg
View File

@ -2,9 +2,12 @@
# through D). To use this config the firmware should be compiled for # through D). To use this config the firmware should be compiled for
# the AVR at90usb1286. # the AVR at90usb1286.
# Note that the "make flash" command is unlikely to work on the # Note that the "make flash" command will not work for Printrboard!
# Printrboard. See the RepRap Printrboard wiki page for instructions # To flash:
# on flashing. # - Connect the "BOOT" jumper.
# - Press the reset button (on board) to enter into DFU mode.
# - Connect via USB and run:
# avrdude -c flip1 -p usb1286 -U flash:w:out/klipper.elf.hex
# See the example.cfg file for a description of available parameters. # See the example.cfg file for a description of available parameters.