3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Add periods to end of sentences in example configs 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2017-05-21 11:47:09 -04:00
parent c9b6662138
commit 944c121a00
3 changed files with 13 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
config/example-corexy.cfg
View File

@ -8,7 +8,7 @@
# FIRST. Incorrectly configured parameters may cause damage. # FIRST. Incorrectly configured parameters may cause damage.
# The stepper_x section is used to describe the X axis as well as the # The stepper_x section is used to describe the X axis as well as the
# stepper controlling the X+Y movement # stepper controlling the X+Y movement.
[stepper_x] [stepper_x]
step_pin: ar54 step_pin: ar54
dir_pin: ar55 dir_pin: ar55
@ -21,7 +21,7 @@ position_endstop: 0
position_max: 200 position_max: 200
# The stepper_y section is used to describe the Y axis as well as the # The stepper_y section is used to describe the Y axis as well as the
# stepper controlling the X-Y movement # stepper controlling the X-Y movement.
[stepper_y] [stepper_y]
step_pin: ar60 step_pin: ar60
dir_pin: ar61 dir_pin: ar61

6
config/example-delta.cfg
View File

@ -20,7 +20,7 @@ homing_speed: 50.0
position_endstop: 297.05 position_endstop: 297.05
# The stepper_b section describes the stepper controlling the front # The stepper_b section describes the stepper controlling the front
# right tower (at 330 degrees) # right tower (at 330 degrees).
[stepper_b] [stepper_b]
step_pin: ar60 step_pin: ar60
dir_pin: ar61 dir_pin: ar61
@ -30,7 +30,7 @@ endstop_pin: ^ar15
position_endstop: 297.05 position_endstop: 297.05
# The stepper_c section describes the stepper controlling the rear # The stepper_c section describes the stepper controlling the rear
# tower (at 90 degrees) # tower (at 90 degrees).
[stepper_c] [stepper_c]
step_pin: ar46 step_pin: ar46
dir_pin: ar48 dir_pin: ar48
@ -64,7 +64,7 @@ control: watermark
min_temp: 0 min_temp: 0
max_temp: 130 max_temp: 130
# Extruder print fan (omit section if fan not present) # Extruder print fan (omit section if fan not present).
#[fan] #[fan]
#pin: ar9 #pin: ar9

16
config/example.cfg
View File

@ -18,7 +18,7 @@
# The stepper_x section is used to describe the stepper controlling # The stepper_x section is used to describe the stepper controlling
# the X axis in a cartesian robot # the X axis in a cartesian robot.
[stepper_x] [stepper_x]
step_pin: ar29 step_pin: ar29
# Step GPIO pin (triggered high). This parameter must be provided. # Step GPIO pin (triggered high). This parameter must be provided.
@ -77,7 +77,7 @@ position_max: 200
# The stepper_y section is used to describe the stepper controlling # The stepper_y section is used to describe the stepper controlling
# the Y axis in a cartesian robot. It has the same settings as the # the Y axis in a cartesian robot. It has the same settings as the
# stepper_x section # stepper_x section.
[stepper_y] [stepper_y]
step_pin: ar27 step_pin: ar27
dir_pin: ar26 dir_pin: ar26
@ -90,7 +90,7 @@ position_max: 200
# The stepper_z section is used to describe the stepper controlling # The stepper_z section is used to describe the stepper controlling
# the Z axis in a cartesian robot. It has the same settings as the # the Z axis in a cartesian robot. It has the same settings as the
# stepper_x section # stepper_x section.
[stepper_z] [stepper_z]
step_pin: ar23 step_pin: ar23
dir_pin: !ar22 dir_pin: !ar22
@ -105,7 +105,7 @@ position_max: 200
# controlling the printer extruder and the heater parameters for the # controlling the printer extruder and the heater parameters for the
# nozzle. The stepper configuration has the same settings as the # nozzle. The stepper configuration has the same settings as the
# stepper_x section and the heater configuration has the same settings # stepper_x section and the heater configuration has the same settings
# as the heater_bed section # as the heater_bed section (described below).
[extruder] [extruder]
step_pin: ar19 step_pin: ar19
dir_pin: ar18 dir_pin: ar18
@ -151,7 +151,7 @@ filament_diameter: 3.500
# buildup. This setting only applies if pressure_advance is # buildup. This setting only applies if pressure_advance is
# non-zero. The default is 0.010 (10 milliseconds). # non-zero. The default is 0.010 (10 milliseconds).
# #
# The remaining variables describe the extruder heater # The remaining variables describe the extruder heater.
heater_pin: ar4 heater_pin: ar4
# PWM output pin controlling the heater. This parameter must be # PWM output pin controlling the heater. This parameter must be
# provided. # provided.
@ -219,7 +219,7 @@ control: watermark
min_temp: 0 min_temp: 0
max_temp: 110 max_temp: 110
# Extruder print fan (omit section if fan not present) # Extruder print fan (omit section if fan not present).
[fan] [fan]
pin: ar14 pin: ar14
# PWM output pin controlling the fan. This parameter must be # PWM output pin controlling the fan. This parameter must be
@ -234,7 +234,7 @@ pin: ar14
# Time (in seconds) to run the fan at full speed when first enabling # Time (in seconds) to run the fan at full speed when first enabling
# it (helps get the fan spinning). The default is 0.100 seconds. # it (helps get the fan spinning). The default is 0.100 seconds.
# Micro-controller information # Micro-controller information.
[mcu] [mcu]
serial: /dev/ttyACM0 serial: /dev/ttyACM0
# The serial port to connect to the MCU. The default is /dev/ttyS0 # The serial port to connect to the MCU. The default is /dev/ttyS0
@ -260,7 +260,7 @@ custom:
# LEDs, to configure micro-stepping pins, to configure a digipot, # LEDs, to configure micro-stepping pins, to configure a digipot,
# etc. # etc.
# The printer section controls high level printer settings # The printer section controls high level printer settings.
[printer] [printer]
kinematics: cartesian kinematics: cartesian
# This option must be "cartesian" for cartesian printers. # This option must be "cartesian" for cartesian printers.