3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Note that "minutes" in screws_tilt_adjust means minutes of a clock face 

Reported by @kubik369 and @Sineos.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2022-04-05 20:34:23 -04:00
parent b1ae50cfc7
commit 92de6e91dc
1 changed files with 4 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
docs/Manual_Level.md
View File

@ -179,13 +179,16 @@ Recv: // rear right screw : y=155.0, y=190.0, z=2.71500 : adjust CCW 00:50
Recv: // read left screw : x=-5.0, y=190.0, z=2.47250 : adjust CW 00:02 Recv: // read left screw : x=-5.0, y=190.0, z=2.47250 : adjust CW 00:02
Recv: ok Recv: ok
``` ```
This means that:
This means that:
- front left screw is the reference point you must not change it. - front left screw is the reference point you must not change it.
- front right screw must be turned clockwise 1 full turn and a quarter turn - front right screw must be turned clockwise 1 full turn and a quarter turn
- rear right screw must be turned counter-clockwise 50 minutes - rear right screw must be turned counter-clockwise 50 minutes
- rear left screw must be turned clockwise 2 minutes (not need it's ok) - rear left screw must be turned clockwise 2 minutes (not need it's ok)
Note that "minutes" refers to "minutes of a clock face". So, for
example, 15 minutes is a quarter of a full turn.
Repeat the process several times until you get a good level bed - Repeat the process several times until you get a good level bed -
normally when all adjustments are below 6 minutes. normally when all adjustments are below 6 minutes.