From 8fc3487a8a503b05312096fad0b76956f62c919f Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 11 Feb 2018 15:35:10 -0500 Subject: [PATCH] config: Reword description of set_position_x paramter in homing_override Signed-off-by: Kevin O'Connor --- config/example-extras.cfg | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/config/example-extras.cfg b/config/example-extras.cfg index 32221e2c..9b980626 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -296,11 +296,11 @@ #set_position_x: #set_position_y: #set_position_z: -# If specified, the position to set the printer to (in mm, relative -# to the coordinate system specified in the config file) prior to -# running the above g-code commands. Setting this may be useful if -# an axis must move prior to invoking the normal G28 mechanism for -# that axis. The default is to not force a position for the axis. +# If specified, the printer will assume the axis is at the specified +# position prior to running the above g-code commands. Setting this +# disables homing checks for that axis. This may be useful if the +# head must move prior to invoking the normal G28 mechanism for an +# axis. The default is to not force a position for an axis. # A virtual sdcard may be useful if the host machine is not fast