config: Use "stealthchop_threshold: 999999" if set

Change all the example config files to use either 0 or 999999 for
stealthchop_threshold (as is recommended in the TMC_Drivers.md
document).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-05-09 09:02:43 -04:00
parent 1ed67120cd
commit 8eef1e2146
23 changed files with 171 additions and 171 deletions

View File

@ -127,37 +127,37 @@ max_z_accel: 5
#uart_pin: PC14
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PE1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PB5
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PG10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PD4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PC12
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
########################################

View File

@ -100,25 +100,25 @@ pins: !PC13
#uart_pin: PC10
#run_current: 0.580
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PC11
#run_current: 0.580
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PC12
#run_current: 0.580
#hold_current: 0.500
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PD2
#run_current: 0.650
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
########################################
@ -130,28 +130,28 @@ pins: !PC13
#spi_bus: spi3
#run_current: 0.580
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
#cs_pin: PC11
#spi_bus: spi3
#run_current: 0.580
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
#cs_pin: PC12
#spi_bus: spi3
#run_current: 0.580
#hold_current: 0.450
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#cs_pin: PD2
#spi_bus: spi3
#run_current: 0.650
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
########################################

View File

@ -20,7 +20,7 @@ uart_pin: P1.1
#diag_pin: P1.29
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 99999
stealthchop_threshold: 999999
[stepper_y]
step_pin: P1.14
@ -38,7 +38,7 @@ uart_pin: P1.10
#diag_pin: P1.28
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 99999
stealthchop_threshold: 999999
[stepper_z]
step_pin: P4.29
@ -55,7 +55,7 @@ uart_pin: P1.17
#diag_pin: P1.27
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 99999
stealthchop_threshold: 999999
[extruder]
step_pin: P2.6
@ -80,7 +80,7 @@ uart_pin: P0.5
#diag_pin: P1.26
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 99999
stealthchop_threshold: 999999
#[extruder1]
#step_pin: P2.11

View File

@ -31,7 +31,7 @@ tx_pin: PC10
uart_address: 0
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_y]
step_pin: PB10
@ -50,7 +50,7 @@ tx_pin: PC10
uart_address: 2
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_z]
step_pin: PB0
@ -68,7 +68,7 @@ tx_pin: PC10
uart_address: 1
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[extruder]
step_pin: PB3
@ -94,7 +94,7 @@ tx_pin: PC10
uart_address: 3
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[heater_bed]
heater_pin: PC9

View File

@ -29,7 +29,7 @@ homing_speed: 50
uart_pin: PB15
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_y]
step_pin: PB10
@ -46,7 +46,7 @@ homing_speed: 50
uart_pin: PC6
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_z]
step_pin: PB0
@ -62,7 +62,7 @@ position_max: 250
uart_pin: PC10
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[extruder]
step_pin: PB3
@ -86,7 +86,7 @@ max_temp: 250
uart_pin: PC11
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[heater_bed]
heater_pin: PC9

View File

@ -28,7 +28,7 @@ tx_pin: PC10
uart_address: 0
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_y]
step_pin: PB10
@ -47,7 +47,7 @@ tx_pin: PC10
uart_address: 2
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_z]
step_pin: PB0
@ -65,7 +65,7 @@ tx_pin: PC10
uart_address: 1
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[extruder]
step_pin: PB3
@ -91,7 +91,7 @@ tx_pin: PC10
uart_address: 3
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[heater_bed]
heater_pin: PC9

View File

@ -31,7 +31,7 @@ tx_pin: PC10
uart_address: 0
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_y]
step_pin: PB10
@ -50,7 +50,7 @@ tx_pin: PC10
uart_address: 1
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_z]
step_pin: PB0
@ -68,7 +68,7 @@ tx_pin: PC10
uart_address: 2
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[extruder]
step_pin: PB3
@ -94,7 +94,7 @@ tx_pin: PC10
uart_address: 3
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[heater_bed]
heater_pin: PC9

View File

@ -111,37 +111,37 @@ max_z_accel: 100
#uart_pin: PC13
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PE3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PE1
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PD4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PD1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PD6
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
########################################
@ -154,7 +154,7 @@ max_z_accel: 100
##diag1_pin: PB10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
#cs_pin: PB8
@ -162,7 +162,7 @@ max_z_accel: 100
##diag1_pin: PE12
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
#cs_pin: PB9
@ -170,7 +170,7 @@ max_z_accel: 100
##diag1_pin: PG8
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#cs_pin: PB3
@ -178,7 +178,7 @@ max_z_accel: 100
##diag1_pin: PE15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
#cs_pin: PG15
@ -186,7 +186,7 @@ max_z_accel: 100
##diag1_pin: PE10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
#cs_pin: PG12
@ -194,7 +194,7 @@ max_z_accel: 100
##diag1_pin: PG5
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
########################################

View File

@ -96,31 +96,31 @@ max_z_accel: 100
#uart_pin: P1.17
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: P1.15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: P1.10
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: P1.8
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: P1.1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
########################################
@ -139,7 +139,7 @@ max_z_accel: 100
##diag1_pin: P1.29
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
#cs_pin: P1.15
@ -149,7 +149,7 @@ max_z_accel: 100
##diag1_pin: P1.27
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
#cs_pin: P1.10
@ -159,7 +159,7 @@ max_z_accel: 100
##diag1_pin: P1.25
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#cs_pin: P1.8
@ -169,7 +169,7 @@ max_z_accel: 100
##diag1_pin: P1.28
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
#cs_pin: P1.1
@ -179,7 +179,7 @@ max_z_accel: 100
##diag1_pin: P1.26
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
########################################

View File

@ -95,31 +95,31 @@ max_z_accel: 100
#uart_pin: P1.10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#
#[tmc2208 stepper_y]
#uart_pin: P1.9
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#
#[tmc2208 stepper_z]
#uart_pin: P1.8
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#
#[tmc2208 extruder]
#uart_pin: P1.4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#
#[tmc2208 extruder1]
#uart_pin: P1.1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
########################################
@ -133,7 +133,7 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#diag1_pin: P1.29
#[tmc2130 stepper_y]
@ -143,7 +143,7 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#diag1_pin: P1.28
#[tmc2130 stepper_z]
@ -153,7 +153,7 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#diag1_pin: P1.27
#[tmc2130 extruder]
@ -163,7 +163,7 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#diag1_pin: P1.26
#[tmc2130 extruder1]
@ -173,7 +173,7 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#diag1_pin: P1.25

View File

@ -20,7 +20,7 @@ tx_pin: PA10
select_pins: !PC14, !PC16, !PC17
sense_resistor: 0.075
run_current: 0.800
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_y]
step_pin: PC2
@ -39,7 +39,7 @@ tx_pin: PA10
select_pins: PC14, !PC16, !PC17
sense_resistor: 0.075
run_current: 0.800
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_z]
step_pin: PC28
@ -57,7 +57,7 @@ tx_pin: PA10
select_pins: !PC14, PC16, !PC17
sense_resistor: 0.075
run_current: 0.800
stealthchop_threshold: 30
stealthchop_threshold: 999999
# Support analog sensor adjustments using VREF/VSSA pins
[adc_scaled vref_scaled]
@ -89,7 +89,7 @@ tx_pin: PA10
select_pins: PC14, PC16, !PC17
sense_resistor: 0.075
run_current: 0.800
stealthchop_threshold: 5
stealthchop_threshold: 999999
#[extruder1]
#step_pin: PC5

View File

@ -145,55 +145,55 @@ max_z_accel: 100
#uart_pin: PG13
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PG10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PD5
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PD1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PA14
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PG6
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2208 extruder3]
#uart_pin: PG3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2208 extruder4]
#uart_pin: PD10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2208 extruder5]
#uart_pin: PB12
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
########################################
@ -205,63 +205,63 @@ max_z_accel: 100
##diag1_pin: PC3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
#cs_pin: PG10
##diag1_pin: PF2
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
#cs_pin: PBD5
##diag1_pin: PF0
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#cs_pin: PD1
##diag1_pin: PE15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
#cs_pin: PA14
##diag1_pin: PE10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
#cs_pin: PG6
##diag1_pin: PC15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2130 extruder3]
#cs_pin: PG3
##diag1_pin: PC15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2130 extruder4]
#cs_pin: PD10
##diag1_pin: PC15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2130 extruder5]
#cs_pin: PB12
##diag1_pin: PC15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
########################################

View File

@ -26,7 +26,7 @@ tx_pin: PA2
uart_address: 0
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_y]
step_pin: PB2
@ -45,7 +45,7 @@ tx_pin: PA2
uart_address: 2
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_z]
step_pin: PC0
@ -63,7 +63,7 @@ tx_pin: PA2
uart_address: 1
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[extruder]
step_pin: PC15
@ -89,7 +89,7 @@ tx_pin: PA2
uart_address: 3
run_current: 1.0
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[heater_bed]
heater_pin: PC7

View File

@ -25,7 +25,7 @@ uart_pin: PA12
tx_pin: PA11
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_y]
step_pin: PB2
@ -43,7 +43,7 @@ uart_pin: PB7
tx_pin: PB6
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[stepper_z]
step_pin: PC0
@ -60,7 +60,7 @@ uart_pin: PB11
tx_pin: PB10
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[extruder]
step_pin: PC15
@ -85,7 +85,7 @@ uart_pin: PA3
tx_pin: PA2
run_current: 1.0
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[heater_bed]
heater_pin: PC7

View File

@ -113,42 +113,42 @@ pins: PB0
#tx_pin: PJ2
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PJ3
#tx_pin: PJ4
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PE2
#tx_pin: PE6
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 100
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PJ5
#tx_pin: PJ6
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PE7
#tx_pin: PD4
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PA1
#tx_pin: PD5
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
########################################
# TMC SPI configuration
@ -167,42 +167,42 @@ pins: PB0
#diag1_pin: PK1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
#cs_pin: PG2
#diag1_pin: PJ1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
#cs_pin: PJ7
#diag1_pin: PB6
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#cs_pin: PL2
#diag1_pin: PE4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
#cs_pin: PC5
#diag1_pin: PJ0
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
#cs_pin: PL7
#diag1_pin: PK2
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
########################################
# EXP1 / EXP2 (display) pins

View File

@ -107,37 +107,37 @@ max_z_accel: 100
#uart_pin: PE8
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PC4
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PD12
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 100
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PA15
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PC5
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PE0
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
########################################
@ -150,7 +150,7 @@ max_z_accel: 100
#diag1_pin: PB14
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
#spi_bus: spi4
@ -158,7 +158,7 @@ max_z_accel: 100
#diag1_pin: PB13
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
#spi_bus: spi4
@ -166,7 +166,7 @@ max_z_accel: 100
#diag1_pin: PA0
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#spi_bus: spi4
@ -174,7 +174,7 @@ max_z_accel: 100
#diag1_pin: PA3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
#spi_bus: spi4
@ -182,7 +182,7 @@ max_z_accel: 100
#diag1_pin: PA2
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
#spi_bus: spi4
@ -190,7 +190,7 @@ max_z_accel: 100
#diag1_pin: PA1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
########################################

View File

@ -114,42 +114,42 @@ max_z_accel: 100
#tx_pin: PE9
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PE13
#tx_pin: PE14
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PD12
#tx_pin: PD11
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 100
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PA15
#tx_pin: PD3
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PC5
#tx_pin: PC4
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PE0
#tx_pin: PE1
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
########################################
# TMC SPI configuration
@ -172,7 +172,7 @@ max_z_accel: 100
#diag1_pin: PB14
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
#spi_bus: spi1
@ -180,7 +180,7 @@ max_z_accel: 100
#diag1_pin: PB13
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
#spi_bus: spi1
@ -188,7 +188,7 @@ max_z_accel: 100
#diag1_pin: PA0
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#spi_bus: spi1
@ -196,7 +196,7 @@ max_z_accel: 100
#diag1_pin: PA3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
#spi_bus: spi1
@ -204,7 +204,7 @@ max_z_accel: 100
#diag1_pin: PA2
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
#spi_bus: spi1
@ -212,7 +212,7 @@ max_z_accel: 100
#diag1_pin: PA1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
########################################
# EXP1 / EXP2 (display) pins

View File

@ -130,50 +130,50 @@ max_z_accel: 100
#uart_pin: PE7
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PE15
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PD10
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 100
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PD7
#run_current: 0.8
#hold_current: 0.5
#sense_resistor: 0.110
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PC14
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PC15
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 extruder3]
#uart_pin: PA15
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 extruder4]
#uart_pin: PD11
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
########################################
# TMC SPI configuration
@ -185,7 +185,7 @@ max_z_accel: 100
#diag1_pin: PB14
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
#spi_bus: spi4
@ -193,7 +193,7 @@ max_z_accel: 100
#diag1_pin: PB13
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
#spi_bus: spi4
@ -201,7 +201,7 @@ max_z_accel: 100
#diag1_pin: PA0
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#spi_bus: spi4
@ -209,7 +209,7 @@ max_z_accel: 100
#diag1_pin: PA3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
#spi_bus: spi4
@ -217,7 +217,7 @@ max_z_accel: 100
#diag1_pin: PA2
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
#spi_bus: spi4
@ -225,21 +225,21 @@ max_z_accel: 100
#diag1_pin: PA1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder3]
#spi_bus: spi4
#cs_pin: PA15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 extruder4]
#spi_bus: spi4
#cs_pin: PD11
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
########################################
# EXP1 / EXP2 (display) pins

View File

@ -69,25 +69,25 @@ max_temp: 250
uart_pin: PC7
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[tmc2209 stepper_y]
uart_pin: PD2
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
[tmc2209 stepper_z]
uart_pin: PC12
run_current: 0.650
hold_current: 0.450
stealthchop_threshold: 30
stealthchop_threshold: 999999
[tmc2209 extruder]
uart_pin: PC11
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 5
stealthchop_threshold: 999999
[fan]
pin: PA8

View File

@ -91,31 +91,31 @@ max_z_accel: 100
#uart_pin: P1.1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: P1.8
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: P1.10
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: P1.15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: P1.17
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
########################################
@ -130,7 +130,7 @@ max_z_accel: 100
##diag1_pin: ^!P1.29
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
#cs_pin: P1.8
@ -140,7 +140,7 @@ max_z_accel: 100
##diag1_pin: ^!P1.27
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 250
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
#cs_pin: P1.10
@ -150,7 +150,7 @@ max_z_accel: 100
##diag1_pin: ^!P1.25
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 30
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#cs_pin: P1.15
@ -160,7 +160,7 @@ max_z_accel: 100
##diag1_pin: ^!P1.28
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
#cs_pin: P1.17
@ -170,7 +170,7 @@ max_z_accel: 100
##diag1_pin: ^!P1.26
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 5
#stealthchop_threshold: 999999
########################################

View File

@ -164,7 +164,7 @@ cs_pin: PG4
diag1_pin: ^!PK1
run_current: 0.600
hold_current: 0.300
stealthchop_threshold: 250
stealthchop_threshold: 999999
driver_SGT: 3
[tmc2130 stepper_y]
@ -172,18 +172,18 @@ cs_pin: PG2
diag1_pin: ^!PJ1
run_current: 0.700
hold_current: 0.350
stealthchop_threshold: 250
stealthchop_threshold: 999999
driver_SGT: 3
[tmc2130 stepper_z]
cs_pin: PJ7
run_current: 0.800
hold_current: 0.400
stealthchop_threshold: 250
stealthchop_threshold: 999999
[tmc2130 extruder]
cs_pin: PL2
diag1_pin: PE4
run_current: 0.600
hold_current: 0.300
stealthchop_threshold: 250
stealthchop_threshold: 999999

View File

@ -35,7 +35,7 @@ uart_pin: EXP1_6
microsteps: 16
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
diag_pin: EXP1_5
[tmc2209 stepper_2]
@ -43,7 +43,7 @@ uart_pin: EXP1_4
microsteps: 16
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 250
stealthchop_threshold: 999999
diag_pin: EXP1_3
[tmc2209 stepper_3]
@ -51,5 +51,5 @@ uart_pin: EXP1_2
microsteps: 16
run_current: 0.650
hold_current: 0.450
stealthchop_threshold: 30
stealthchop_threshold: 999999
diag_pin: EXP1_1

View File

@ -56,7 +56,7 @@ run_current: 0.800
hold_current: 0.800
interpolate: True
sense_resistor: 0.110
stealthchop_threshold: 250
stealthchop_threshold: 999999
# X : MMU2S color selector
[manual_stepper selector_stepper]
@ -76,7 +76,7 @@ run_current: 1.000
hold_current: 0.400
interpolate: True
sense_resistor: 0.110
stealthchop_threshold: 250
stealthchop_threshold: 999999
#IR
[filament_switch_sensor ir_sensor]