3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Fixed Duet2 reversed heater/fan output pins (#1350) 

Using the Duet2 config as a base for your own config will no longer turn
on all heaters and fans at full power during the (almost inevitable) MCU
shutdown that will occur during initial Klipper setup.

Signed-off-by: Benoit Miller <github@benoitmiller.ca>
This commit is contained in:
Benoit Miller 2019-03-04 13:37:38 -05:00 committed by KevinOConnor
parent 1731fbbca4
commit 8e8063a9d9
1 changed files with 11 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
config/generic-duet2.cfg
View File

@ -183,7 +183,7 @@ enable_pin: !PC6
step_distance: .002
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PA20
heater_pin: !PA20
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC15
control: pid
@ -208,7 +208,7 @@ enable_pin: !PC6
step_distance: .002
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PA16
heater_pin: !PA16
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC12
control: pid
@ -233,7 +233,7 @@ enable_pin: !PC6
step_distance: .002
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PC3
heater_pin: !PC3
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC29
control: pid
@ -258,7 +258,7 @@ enable_pin: !PC6
step_distance: .002
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PC5
heater_pin: !PC5
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC30
control: pid
@ -276,7 +276,7 @@ interpolate: True
run_current: 1.000
[heater_bed]
heater_pin: PA19
heater_pin: !PA19
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC13
control: watermark
@ -327,32 +327,32 @@ max_z_accel: 100
pins: !PC2
[output_pin FAN3]
pin: !sx1509_duex:PIN_12
pin: sx1509_duex:PIN_12
pwm: True
hardware_pwm: True # Only hardware PWM fans are supported
[output_pin FAN4]
pin: !sx1509_duex:PIN_7
pin: sx1509_duex:PIN_7
pwm: True
hardware_pwm: True
[output_pin FAN5]
pin: !sx1509_duex:PIN_6
pin: sx1509_duex:PIN_6
pwm: True
hardware_pwm: True
[output_pin FAN6]
pin: !sx1509_duex:PIN_5
pin: sx1509_duex:PIN_5
pwm: True
hardware_pwm: True
[output_pin FAN7]
pin: !sx1509_duex:PIN_4
pin: sx1509_duex:PIN_4
pwm: True
hardware_pwm: True
[output_pin FAN8]
pin: !sx1509_duex:PIN_15
pin: sx1509_duex:PIN_15
pwm: True
hardware_pwm: True