3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Fixed Duet2 reversed heater/fan output pins (#1350) 

Using the Duet2 config as a base for your own config will no longer turn
on all heaters and fans at full power during the (almost inevitable) MCU
shutdown that will occur during initial Klipper setup.

Signed-off-by: Benoit Miller <github@benoitmiller.ca>
This commit is contained in:
Benoit Miller 2019-03-04 13:37:38 -05:00 committed by KevinOConnor
parent 1731fbbca4
commit 8e8063a9d9
1 changed files with 11 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
config/generic-duet2.cfg
View File

@ -183,7 +183,7 @@ enable_pin: !PC6
step_distance: .002 step_distance: .002
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: PA20 heater_pin: !PA20
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC15 sensor_pin: PC15
control: pid control: pid
@ -208,7 +208,7 @@ enable_pin: !PC6
step_distance: .002 step_distance: .002
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: PA16 heater_pin: !PA16
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC12 sensor_pin: PC12
control: pid control: pid
@ -233,7 +233,7 @@ enable_pin: !PC6
step_distance: .002 step_distance: .002
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: PC3 heater_pin: !PC3
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC29 sensor_pin: PC29
control: pid control: pid
@ -258,7 +258,7 @@ enable_pin: !PC6
step_distance: .002 step_distance: .002
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: PC5 heater_pin: !PC5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC30 sensor_pin: PC30
control: pid control: pid
@ -276,7 +276,7 @@ interpolate: True
run_current: 1.000 run_current: 1.000
[heater_bed] [heater_bed]
heater_pin: PA19 heater_pin: !PA19
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC13 sensor_pin: PC13
control: watermark control: watermark
@ -327,32 +327,32 @@ max_z_accel: 100
pins: !PC2 pins: !PC2
[output_pin FAN3] [output_pin FAN3]
pin: !sx1509_duex:PIN_12 pin: sx1509_duex:PIN_12
pwm: True pwm: True
hardware_pwm: True # Only hardware PWM fans are supported hardware_pwm: True # Only hardware PWM fans are supported
[output_pin FAN4] [output_pin FAN4]
pin: !sx1509_duex:PIN_7 pin: sx1509_duex:PIN_7
pwm: True pwm: True
hardware_pwm: True hardware_pwm: True
[output_pin FAN5] [output_pin FAN5]
pin: !sx1509_duex:PIN_6 pin: sx1509_duex:PIN_6
pwm: True pwm: True
hardware_pwm: True hardware_pwm: True
[output_pin FAN6] [output_pin FAN6]
pin: !sx1509_duex:PIN_5 pin: sx1509_duex:PIN_5
pwm: True pwm: True
hardware_pwm: True hardware_pwm: True
[output_pin FAN7] [output_pin FAN7]
pin: !sx1509_duex:PIN_4 pin: sx1509_duex:PIN_4
pwm: True pwm: True
hardware_pwm: True hardware_pwm: True
[output_pin FAN8] [output_pin FAN8]
pin: !sx1509_duex:PIN_15 pin: sx1509_duex:PIN_15
pwm: True pwm: True
hardware_pwm: True hardware_pwm: True