pause_resume: update documentation
Add updates to example-extras.cfg and G-Codes.md documenting pause_resume. Also add M600 (filament change) to sample-macros.cfg. Signed-off-by: Eric Callahan <arksine.code@gmail.com>
This commit is contained in:
parent
7605752dc2
commit
893cbbab83
|
@ -1142,3 +1142,9 @@
|
|||
# default_prefix: echo:
|
||||
# Directly sets the default prefix. If present, this value will override
|
||||
# the "default_type".
|
||||
|
||||
# Pause/Resume functionality with support of position capture and restore
|
||||
#[pause_resume]
|
||||
#recover_velocity: 50.
|
||||
# When capture/restore is enabled, the speed at which to return to
|
||||
# the captured position (in mm/s). Default is 50.0 mm/s.
|
||||
|
|
|
@ -34,3 +34,24 @@
|
|||
#gcode: SET_PIN PIN=BEEPER_pin VALUE={S}
|
||||
# G4 P{P}
|
||||
# SET_PIN PIN=BEEPER_pin VALUE=0
|
||||
|
||||
# M600: Filament Change. This macro will pause the printer, move
|
||||
# the tool to the change position, and retract the filament 50mm.
|
||||
# Adjust the retraction settings for your own extruder. After filament
|
||||
# has been changed, the print can be resumed from its previous position
|
||||
# with the "RESUME" gcode
|
||||
#
|
||||
#[gcode_macro M600]
|
||||
#default_parameter_X: 50
|
||||
#default_parameter_Y: 0
|
||||
#default_parameter_Z: 10
|
||||
#gcode:
|
||||
# PAUSE
|
||||
# G91
|
||||
# G1 E-.8 F2700
|
||||
# G1 Z{Z}
|
||||
# G90
|
||||
# G1 X{X} Y{Y} F3000
|
||||
# G91
|
||||
# G1 E-50 F1000
|
||||
# G90
|
||||
|
|
|
@ -291,3 +291,13 @@ enabled.
|
|||
- `RESPOND TYPE=error MSG="<message>"`: echo the message prepended with `!! `.
|
||||
- `RESPOND PREFIX=<prefix> MSG="<message>"`: echo the message prepended with `<prefix>`
|
||||
(The `PREFIX` parameter will take priority over the `TYPE` parameter)
|
||||
|
||||
## Pause Resume
|
||||
|
||||
The following commands are available when the "pause_resume" config section
|
||||
is enabled:
|
||||
- `PAUSE`: Pauses the current print. The current position is captured for
|
||||
restoration upon resume.
|
||||
- `RESUME [VELOCITY=<value>]`: Resumes the print from a pause, first restoring
|
||||
the previously captured position. The VELOCITY parameter determines the speed
|
||||
at which the tool should return to the original captured position.
|
||||
|
|
Loading…
Reference in New Issue