3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Add motor power definition to generic-bigtreetech-skr-2.cfg 

Add a pin definition to enable motor power and add a warning about
initial faulty SKR2 boards.

Reported by @FHeilmann.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-06-07 21:35:42 -04:00
parent be4fb7f128
commit 87e12c0430
1 changed files with 8 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
config/generic-bigtreetech-skr-2.cfg
View File

@ -9,6 +9,10 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
# Note: The initial revision of this board has a flaw that can cause
# damage to itself and other boards. Be sure to verify the board is
# not impacted by this flaw before using it.
[stepper_x] [stepper_x]
step_pin: PE2 step_pin: PE2
dir_pin: PE1 dir_pin: PE1
@ -84,6 +88,10 @@ pin: PB7
#[heater_fan fan2] #[heater_fan fan2]
#pin: PB5 #pin: PB5
[output_pin motor_power]
pin: PC13
value: 1
[mcu] [mcu]
serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00 serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00