From 87e12c0430cffce03004f92250a2ffe6885442bf Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Mon, 7 Jun 2021 21:35:42 -0400 Subject: [PATCH] config: Add motor power definition to generic-bigtreetech-skr-2.cfg Add a pin definition to enable motor power and add a warning about initial faulty SKR2 boards. Reported by @FHeilmann. Signed-off-by: Kevin O'Connor --- config/generic-bigtreetech-skr-2.cfg | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/config/generic-bigtreetech-skr-2.cfg b/config/generic-bigtreetech-skr-2.cfg index 218badea..c4195106 100644 --- a/config/generic-bigtreetech-skr-2.cfg +++ b/config/generic-bigtreetech-skr-2.cfg @@ -9,6 +9,10 @@ # See docs/Config_Reference.md for a description of parameters. +# Note: The initial revision of this board has a flaw that can cause +# damage to itself and other boards. Be sure to verify the board is +# not impacted by this flaw before using it. + [stepper_x] step_pin: PE2 dir_pin: PE1 @@ -84,6 +88,10 @@ pin: PB7 #[heater_fan fan2] #pin: PB5 +[output_pin motor_power] +pin: PC13 +value: 1 + [mcu] serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00