3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Update FAQ to emphasize checking Config_Changes.md on an upgrade 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-12-10 13:49:01 -05:00
parent 205da598fd
commit 8663bc8192
1 changed files with 16 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
docs/FAQ.md
View File

@ -462,7 +462,14 @@ step counter being off by a multiple of 64 microsteps.)
### How do I upgrade to the latest software?
The general way to upgrade is to ssh into the Raspberry Pi and run:
The first step to upgrading the software is to review the latest
[config changes](Config_Changes.md) document. On occasion, changes are
made to the software that require users to update their settings as
part of a software upgrade. It is a good idea to review this document
prior to upgrading.
When ready to upgrade, the general method is to ssh into the Raspberry
Pi and run:
```
cd ~/klipper
@ -494,11 +501,12 @@ sudo service klipper restart
If after using this shortcut the software warns about needing to
reflash the micro-controller or some other unusual error occurs, then
follow the full upgrade steps outlined above. Note that the RESTART
and FIRMWARE_RESTART g-code commands do not load new software - the
above "sudo service klipper restart" and "make flash" commands are
needed for a software change to take effect.
follow the full upgrade steps outlined above.
When upgrading the software, be sure to check the
[config changes](Config_Changes.md) document for information on
software changes that may require updates to your printer.cfg file.
If any errors persist then double check the
[config changes](Config_Changes.md) document, as you may need to
modify the printer configuration.
Note that the RESTART and FIRMWARE_RESTART g-code commands do not load
new software - the above "sudo service klipper restart" and "make
flash" commands are needed for a software change to take effect.