3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

fan: Scale fan speed requests between 0 and max_power 

If the fan's max power is limited by the config, then scale speed
requests between 0 and max_power.  This makes more sense for typical
g-code fan speeds.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-04-20 13:15:03 -04:00
parent 48e9fa04e7
commit 85e6cd865c
4 changed files with 9 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
config/example-extras.cfg
View File

@ -205,10 +205,10 @@
#heater_temp: 50.0 #heater_temp: 50.0
# A temperature (in Celsius) that the heater must drop below before # A temperature (in Celsius) that the heater must drop below before
# the fan is disabled. The default is 50 Celsius. # the fan is disabled. The default is 50 Celsius.
#fan_speed: #fan_speed: 1.0
# The fan speed (expressed as a value from 0.0 to 1.0) that the fan # The fan speed (expressed as a value from 0.0 to 1.0) that the fan
# will be set to when its associated heater is enabled. The default # will be set to when its associated heater is enabled. The default
# is max_power. # is 1.0
# Additional micro-controllers (one may define any number of sections # Additional micro-controllers (one may define any number of sections

5
config/example.cfg
View File

@ -224,7 +224,10 @@ pin: ar9
# enabled for extended periods, while a value of 0.5 would allow the # enabled for extended periods, while a value of 0.5 would allow the
# pin to be enabled for no more than half the time. This setting may # pin to be enabled for no more than half the time. This setting may
# be used to limit the total power output (over extended periods) to # be used to limit the total power output (over extended periods) to
# the fan. The default is 1.0. # the fan. If this value is less than 1.0 then fan speed requests
# will be scaled between zero and max_power (for example, if
# max_power is .9 and a fan speed of 80% is requested then the fan
# power will be set to 72%). The default is 1.0.
#cycle_time: 0.010 #cycle_time: 0.010
# The amount of time (in seconds) for each PWM power cycle to the # The amount of time (in seconds) for each PWM power cycle to the
# fan. It is recommended this be 10 milliseconds or greater when # fan. It is recommended this be 10 milliseconds or greater when

2
klippy/extras/fan.py
View File

@ -19,7 +19,7 @@ class PrinterFan:
hardware_pwm = config.getboolean('hardware_pwm', False) hardware_pwm = config.getboolean('hardware_pwm', False)
self.mcu_fan.setup_cycle_time(cycle_time, hardware_pwm) self.mcu_fan.setup_cycle_time(cycle_time, hardware_pwm)
def set_speed(self, print_time, value): def set_speed(self, print_time, value):
value = max(0., min(self.max_power, value)) value = max(0., min(self.max_power, value * self.max_power))
if value == self.last_fan_value: if value == self.last_fan_value:
return return
print_time = max(self.last_fan_time + FAN_MIN_TIME, print_time) print_time = max(self.last_fan_time + FAN_MIN_TIME, print_time)

6
klippy/extras/heater_fan.py
View File

@ -14,10 +14,8 @@ class PrinterHeaterFan:
self.heater_temp = config.getfloat("heater_temp", 50.0) self.heater_temp = config.getfloat("heater_temp", 50.0)
self.fan = fan.PrinterFan(config) self.fan = fan.PrinterFan(config)
self.mcu = self.fan.mcu_fan.get_mcu() self.mcu = self.fan.mcu_fan.get_mcu()
max_power = self.fan.max_power self.fan_speed = config.getfloat("fan_speed", 1., minval=0., maxval=1.)
self.fan_speed = config.getfloat( self.fan.mcu_fan.setup_start_value(0., self.fan.max_power)
"fan_speed", max_power, minval=0., maxval=max_power)
self.fan.mcu_fan.setup_start_value(0., max_power)
def printer_state(self, state): def printer_state(self, state):
if state == 'ready': if state == 'ready':
pheater = self.printer.lookup_object('heater') pheater = self.printer.lookup_object('heater')