3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

verify_heater: Scale hysteresis duration check 

If a heater falls out of the target range, accumulate the temperature
differences to determine if an error should be raised.  This should
make it less likely to report an error for heaters that drift slightly
out of range, and it should make error reporting faster for heaters
that rapidly fall out of range.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-03-11 19:16:55 -04:00
parent 57d342b455
commit 849f4ed25f
2 changed files with 17 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
config/example-extras.cfg
View File

@ -133,15 +133,18 @@
# The amount of time (in seconds) that the heating_gain must be met
# in before an error is raised. The default is 20 seconds for
# extruders and 60 seconds for heater_bed.
#hysteresis: 10
#hysteresis: 5
# The difference between the target temperature and the current
# temperature for the heater to be considered within range of the
# target temperature. The default is 10.
#check_time: 15
# The amount of time (in seconds) a heater that has reached the
# target temperature (as defined by the hysteresis field) may fall
# outside the target temperature range before an error is
# raised. The default is 15.
# target temperature. The default is 5.
#max_error: 120
# The maximum temperature difference a heater that falls outside the
# target temperature range may accumulate before an error is
# raised. For example, if the target temperature is 200, the
# hysteresis is 5, the max_error is 120, and the temperature is
# reported at 185 degrees for 12 seconds then an error would be
# raised (or 24 seconds at 190, or 120 seconds at 194, etc.). The
# default is 120.
# Multi-stepper axes. On a cartesian style printer, the stepper

13
klippy/extras/verify_heater.py
View File

@ -11,8 +11,8 @@ class HeaterCheck:
self.printer = config.get_printer()
self.heater_name = config.get_name().split()[1]
self.heater = None
self.hysteresis = config.getfloat('hysteresis', 10., above=0.)
self.check_time = config.getfloat('check_time', 15., minval=1.)
self.hysteresis = config.getfloat('hysteresis', 5., minval=0.)
self.max_error = config.getfloat('max_error', 120., minval=0.)
self.heating_gain = config.getfloat('heating_gain', 2., above=0.)
default_gain_time = 20.
if self.heater_name == 'heater_bed':
@ -20,7 +20,7 @@ class HeaterCheck:
self.check_gain_time = config.getfloat(
'check_gain_time', default_gain_time, minval=1.)
self.met_target = False
self.last_target = self.goal_temp = 0.
self.last_target = self.goal_temp = self.error = 0.
self.fault_systime = self.printer.get_reactor().NEVER
def printer_state(self, state):
if state == 'connect':
@ -33,12 +33,13 @@ class HeaterCheck:
temp, target = self.heater.get_temp(eventtime)
if temp >= target - self.hysteresis:
# Temperature near target - reset checks
if not self.met_target:
if not self.met_target and target:
logging.info("Heater %s within range of %.3f",
self.heater_name, target)
self.met_target = True
self.fault_systime = eventtime + self.check_time
self.error = 0.
elif self.met_target:
self.error += (target - self.hysteresis) - temp
if target != self.last_target:
# Target changed - reset checks
logging.info("Heater %s approaching new target of %.3f",
@ -46,7 +47,7 @@ class HeaterCheck:
self.met_target = False
self.goal_temp = temp + self.heating_gain
self.fault_systime = eventtime + self.check_gain_time
elif eventtime >= self.fault_systime:
elif self.error >= self.max_error:
# Failure due to inability to maintain target temperature
return self.heater_fault()
elif temp >= self.goal_temp: