3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Warn that cycle_time may not match when using hardware_pwm 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-02-19 13:17:20 -05:00
parent b260eb9168
commit 834b9e3d92
2 changed files with 8 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
config/example-extras.cfg
View File

@ -656,8 +656,10 @@
# this be 10 milliseconds or greater when using software based
# PWM. The default is 0.100 seconds for pwm pins.
#hardware_pwm: False
# Enable this to use hardware PWM instead of software PWM. The
# default is False.
# Enable this to use hardware PWM instead of software PWM. When
# using hardware PWM the actual cycle time is constrained by the
# implementation and may be significantly different than the
# requested cycle_time. The default is False.
#scale:
# This parameter can be used to alter how the 'value' and
# 'shutdown_value' parameters are interpreted for pwm pins. If

6
config/example.cfg
View File

@ -242,8 +242,10 @@ pin: ar9
# fan. It is recommended this be 10 milliseconds or greater when
# using software based PWM. The default is 0.010 seconds.
#hardware_pwm: False
# Enable this to use hardware PWM instead of software PWM. The
# default is False.
# Enable this to use hardware PWM instead of software PWM. When
# using hardware PWM the actual cycle time is constrained by the
# implementation and may be significantly different than the
# requested cycle_time. The default is False.
#kick_start_time: 0.100
# Time (in seconds) to run the fan at full speed when first enabling
# it (helps get the fan spinning). The default is 0.100 seconds.