config: Add a config snippet for the BLTouch probe

Add an example to help users with a BLTouch probe.  This is based on
information from @mediumo and @riddlez666.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-02-11 15:08:45 -05:00
parent 41f73d0c8c
commit 82db072151
1 changed files with 53 additions and 0 deletions

53
config/sample-bltouch.cfg Normal file
View File

@ -0,0 +1,53 @@
# This file provides example config file settings for the BLTouch
# automatic bed leveling sensor. This file is just a "snippet" of
# sections specific to the BLTouch - it must be added to a config file
# containing the configuration of the rest of the printer.
# Be sure to review and update this config with the appropriate pins
# and coordinates for your printer.
# See the "example.cfg" and "example-extras.cfg" files for a
# description of config parameters.
# Define the BLTouch servo
[servo bltouch]
pin: ar32
maximum_servo_angle: 180
minimum_pulse_width: 0.0006
maximum_pulse_width: 0.0024
# Define a probe using the BLTouch
[probe]
pin: ar30
activate_gcode:
SET_SERVO SERVO=bltouch ANGLE=10
SET_SERVO SERVO=bltouch ANGLE=60
G4 P200
deactivate_gcode:
SET_SERVO SERVO=bltouch ANGLE=90
# Example bed_tilt config section
[bed_tilt]
#x_adjust:
#y_adjust:
points:
100,100
10,10
10,100
10,190
100,10
100,190
190,10
190,100
190,190
probe_z_offset: 2.345
# If the BLTouch is used to home the Z axis, then define a
# homing_override section and use probe:z_virtual_endstop as the
# endstop pin in the stepper_z section.
#[homing_override]
#set_position_z: 5
#gcode:
# G28 X0 Y0
# G1 X100 Y100 F3600
# G28 Z0