3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Note the use of the virtual_sdcard feature 

Note that virtual_sdcard helps on slower machines.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-03-02 11:28:01 -05:00
parent b139a8561f
commit 82a65e9f4a
2 changed files with 21 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
docs/FAQ.md
View File

@ -97,11 +97,17 @@ baud rate to 250000 when using Klipper.
### Can I run Klipper on something other than a Raspberry Pi 3?
The recommended hardware is a Raspberry Pi 2 or a Raspberry
Pi 3. Klipper will run on a Raspberry Pi 1 and on the Raspberry Pi
Zero, but these boards don't have enough processing power to run
OctoPrint well. It's not uncommon for print stalls to occur on these
slower machines (the printer may move faster than OctoPrint can send
movement commands).
Pi 3.
Klipper will run on a Raspberry Pi 1 and on the Raspberry Pi Zero, but
these boards don't have enough processing power to run OctoPrint
well. It's not uncommon for print stalls to occur on these slower
machines (the printer may move faster than OctoPrint can send movement
commands) when printing directly from OctoPrint. If you wish to run on
one one of these slower boards anyway, consider using the
"virtual_sdcard" feature (see
[config/example-extras.cfg](../config/example-extras.cfg) for details)
when printing.
For running on the Beaglebone, see the
[Beaglebone specific installation instructions](beaglebone.md).

11
docs/beaglebone.md
View File

@ -54,7 +54,6 @@ sudo systemctl start octoprint
Make sure the octoprint web server is accessible - it should be at:
[http://beaglebone:5000/](http://beaglebone:5000/)
Building the micro-controller code
==================================
@ -92,3 +91,13 @@ Remaining configuration
Complete the installation by configuring Klipper and Octoprint
following the instructions in
[the main installation document](Installation.md#configuring-klipper).
Printing on the Beaglebone
==========================
Unfortunately, the Beaglebone processor can sometimes struggle to run
OctoPrint well. Print stalls have been known to occur on complex
prints (the printer may move faster than OctoPrint can send movement
commands). If this occurs, consider using the "virtual_sdcard" feature
(see [config/example-extras.cfg](../config/example-extras.cfg) for
details) to print directly from Klipper.