3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Update printer-creality-ender5-2019.cfg to add instructions for silent boards (#6326) 

Recently tested on my ender 5 pro that came from creality with a v1.1.5 board. Works. Tested all endstops, motors, and heaters. 

Signed-off-by: Jake Aronleigh <jakestar98@outlook.com>
This commit is contained in:
ghostoverflow256 2023-10-10 04:28:49 +11:00 committed by GitHub
parent 83ef0e135e
commit 7eabf02f5b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 5 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
config/printer-creality-ender5-2019.cfg
View File

@ -1,10 +1,12 @@
# This file contains common pin mappings for the 2019 Creality
# Ender 5. To use this config, the firmware should be compiled for the
# AVR atmega1284p.
# AVR atmega1284p. This also works for the v1.1.5 silent boards.
# Note, a number of Melzi boards are shipped with a bootloader that
# requires the following command to flash the board:
# avrdude -p atmega1284p -c arduino -b 57600 -P /dev/ttyUSB0 -U out/klipper.elf.hex
# For v1.1.5 silent boards, the following command is used:
# avrdude -p atmega1284p -c arduino -P /dev/ttyUSB0 -b 115200 -U flash:w:out/klipper.elf.hex
# If the above command does not work and "make flash" does not work
# then one may need to flash a bootloader to the board - see the
# Klipper docs/Bootloaders.md file for more information.
@ -80,6 +82,8 @@ pin: PB4
[mcu]
serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
# Silent boards tend to have the exact same serial ID, except without USB2.0, using USB instead.
# e.g. /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
[printer]
kinematics: cartesian