3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Fix config snippet for polar 

Previously the section for stepper_bed was intertwined with printer. This commit makes it match (../config/example-polar.cfg).

Signed-off-by: Charles Pickering <me@charlespick.xyz>
This commit is contained in:
Charles Pickering 2022-03-20 08:16:53 -07:00 committed by KevinOConnor
parent 3e0c0e9ccf
commit 7e654aed2f
1 changed files with 9 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
docs/Config_Reference.md
View File

@ -468,15 +468,6 @@ position are known to not work properly.
```
[printer]
kinematics: polar
# The stepper_bed section is used to describe the stepper controlling
# the bed.
[stepper_bed]
gear_ratio:
# A gear_ratio must be specified and rotation_distance may not be
# specified. For example, if the bed has an 80 toothed pulley driven
# by a stepper with a 16 toothed pulley then one would specify a
# gear ratio of "80:16". This parameter must be provided.
max_z_velocity:
# This sets the maximum velocity (in mm/s) of movement along the z
# axis. This setting can be used to restrict the maximum speed of
@ -487,6 +478,15 @@ max_z_accel:
# the z axis. It limits the acceleration of the z stepper motor. The
# default is to use max_accel for max_z_accel.
# The stepper_bed section is used to describe the stepper controlling
# the bed.
[stepper_bed]
gear_ratio:
# A gear_ratio must be specified and rotation_distance may not be
# specified. For example, if the bed has an 80 toothed pulley driven
# by a stepper with a 16 toothed pulley then one would specify a
# gear ratio of "80:16". This parameter must be provided.
# The stepper_arm section is used to describe the stepper controlling
# the carriage on the arm.
[stepper_arm]