diff --git a/lib/README b/lib/README
index bbf09680..d91b5f68 100644
--- a/lib/README
+++ b/lib/README
@@ -43,6 +43,10 @@ STMicroelectronics:
http://www.st.com/en/embedded-software/stm32cubef0.html
version 1.9.0 (extracted 20190116).
+The stm32f0 directory contains code from STMicroelectronics:
+ http://www.st.com/en/embedded-software/stm32cubef1.html
+version 1.10.0 (extracted 20190721).
+
The stm32f1 directory contains code from STMicroelectronics:
http://www.st.com/en/embedded-software/stm32cubef1.html
version 1.8.0 (extracted 20190721).
diff --git a/lib/stm32f0/include/stm32f030x6.h b/lib/stm32f0/include/stm32f030x6.h
new file mode 100644
index 00000000..369506e3
--- /dev/null
+++ b/lib/stm32f0/include/stm32f030x6.h
@@ -0,0 +1,5390 @@
+/**
+ ******************************************************************************
+ * @file stm32f030x6.h
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File.
+ * This file contains all the peripheral register's definitions, bits
+ * definitions and memory mapping for STM32F0xx devices.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ *
© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f030x6
+ * @{
+ */
+
+#ifndef __STM32F030x6_H
+#define __STM32F030x6_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 27 /*!< USART1 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f030x8
+ * @{
+ */
+
+#ifndef __STM32F030x8_H
+#define __STM32F030x8_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_IRQn = 17, /*!< TIM6 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt */
+ USART2_IRQn = 28 /*!< USART2 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f030xc
+ * @{
+ */
+
+#ifndef __STM32F030xC_H
+#define __STM32F030xC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_IRQn = 17, /*!< TIM6 global Interrupt */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_6_IRQn = 29, /*!< USART3 to USART6 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+ uint32_t RESERVED0[40];/*!< Reserved as declared by channel typedef 0x08 - 0xA4 */
+ __IO uint32_t CSELR; /*!< Channel selection register, Address offset: 0xA8 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f031x6
+ * @{
+ */
+
+#ifndef __STM32F031x6_H
+#define __STM32F031x6_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD Interrupt through EXTI Lines 16 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 27 /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f038xx
+ * @{
+ */
+
+#ifndef __STM32F038xx_H
+#define __STM32F038xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 27 /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f042x6
+ * @{
+ */
+
+#ifndef __STM32F042x6_H
+#define __STM32F042x6_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_VDDIO2_IRQn = 1, /*!< PVD & VDDIO2 Interrupt through EXTI Lines 16 and 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ CEC_CAN_IRQn = 30, /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+ USB_IRQn = 31 /*!< USB global Interrupt & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+}CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+}CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+}CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+}CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f048xx
+ * @{
+ */
+
+#ifndef __STM32F048xx_H
+#define __STM32F048xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ VDDIO2_IRQn = 1, /*!< VDDIO2 Interrupt through EXTI Line 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ CEC_CAN_IRQn = 30, /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+ USB_IRQn = 31 /*!< USB global Interrupt & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+}CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+}CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+}CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+}CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f051x8
+ * @{
+ */
+
+#ifndef __STM32F051x8_H
+#define __STM32F051x8_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD Interrupt through EXTI Lines 16 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */
+ ADC1_COMP_IRQn = 12, /*!< ADC1 and COMP interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ CEC_CAN_IRQn = 30 /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< COMP control and status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */
+} COMP_Common_TypeDef;
+
+/* Legacy defines */
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Kept for legacy purpose. Use structure 'COMP_Common_TypeDef'. */
+}COMP1_2_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ uint32_t RESERVED1[6]; /*!< Reserved, Address offset: 0x14 to 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f058xx
+ * @{
+ */
+
+#ifndef __STM32F058xx_H
+#define __STM32F058xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */
+ ADC1_COMP_IRQn = 12, /*!< ADC1 and COMP interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ CEC_CAN_IRQn = 30 /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< COMP control and status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */
+} COMP_Common_TypeDef;
+
+/* Legacy defines */
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Kept for legacy purpose. Use structure 'COMP_Common_TypeDef'. */
+}COMP1_2_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ uint32_t RESERVED1[6]; /*!< Reserved, Address offset: 0x14 to 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f070x6
+ * @{
+ */
+
+#ifndef __STM32F070x6_H
+#define __STM32F070x6_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ USB_IRQn = 31 /*!< USB global Interrupt & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f070xb
+ * @{
+ */
+
+#ifndef __STM32F070xB_H
+#define __STM32F070xB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_IRQn = 17, /*!< TIM6 global Interrupt */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ USART3_4_IRQn = 29, /*!< USART3 and USART4 global Interrupt */
+ USB_IRQn = 31 /*!< USB global Interrupt & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f071xb
+ * @{
+ */
+
+#ifndef __STM32F071xB_H
+#define __STM32F071xB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_VDDIO2_IRQn = 1, /*!< PVD & VDDIO2 Interrupt through EXTI Lines 16 and 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_6_7_IRQn = 11, /*!< DMA1 Channel 4 to Channel 7 Interrupt */
+ ADC1_COMP_IRQn = 12, /*!< ADC1 and COMP interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupt */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_4_IRQn = 29, /*!< USART3 and USART4 global Interrupt */
+ CEC_CAN_IRQn = 30 /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< COMP control and status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */
+} COMP_Common_TypeDef;
+
+/* Legacy defines */
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Kept for legacy purpose. Use structure 'COMP_Common_TypeDef'. */
+}COMP1_2_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f072xb
+ * @{
+ */
+
+#ifndef __STM32F072xB_H
+#define __STM32F072xB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_VDDIO2_IRQn = 1, /*!< PVD & VDDIO2 Interrupt through EXTI Lines 16 and 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_6_7_IRQn = 11, /*!< DMA1 Channel 4 to Channel 7 Interrupt */
+ ADC1_COMP_IRQn = 12, /*!< ADC1 and COMP interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupt */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_4_IRQn = 29, /*!< USART3 and USART4 global Interrupt */
+ CEC_CAN_IRQn = 30, /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+ USB_IRQn = 31 /*!< USB global Interrupt & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+}CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+}CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+}CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+}CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< COMP control and status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */
+} COMP_Common_TypeDef;
+
+/* Legacy defines */
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Kept for legacy purpose. Use structure 'COMP_Common_TypeDef'. */
+}COMP1_2_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f078xx
+ * @{
+ */
+
+#ifndef __STM32F078xx_H
+#define __STM32F078xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ VDDIO2_IRQn = 1, /*!< VDDIO2 Interrupt through EXTI Line 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */
+ DMA1_Channel4_5_6_7_IRQn = 11, /*!< DMA1 Channel 4 to Channel 7 Interrupt */
+ ADC1_COMP_IRQn = 12, /*!< ADC1 and COMP interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupt */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_4_IRQn = 29, /*!< USART3 and USART4 global Interrupt */
+ CEC_CAN_IRQn = 30, /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+ USB_IRQn = 31 /*!< USB global Interrupt & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+}CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+}CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+}CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+}CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< COMP control and status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */
+} COMP_Common_TypeDef;
+
+/* Legacy defines */
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Kept for legacy purpose. Use structure 'COMP_Common_TypeDef'. */
+}COMP1_2_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f091xc
+ * @{
+ */
+
+#ifndef __STM32F091xC_H
+#define __STM32F091xC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_VDDIO2_IRQn = 1, /*!< PVD & VDDIO2 Interrupt through EXTI Lines 16 and 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Ch1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Ch2_3_DMA2_Ch1_2_IRQn = 10, /*!< DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 Interrupts */
+ DMA1_Ch4_7_DMA2_Ch3_5_IRQn = 11, /*!< DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 Interrupt */
+ ADC1_COMP_IRQn = 12, /*!< ADC1 and COMP interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupt */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_8_IRQn = 29, /*!< USART3 to USART8 global Interrupt */
+ CEC_CAN_IRQn = 30 /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+}CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+}CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+}CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+}CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< COMP control and status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */
+} COMP_Common_TypeDef;
+
+/* Legacy defines */
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Kept for legacy purpose. Use structure 'COMP_Common_TypeDef'. */
+}COMP1_2_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+ uint32_t RESERVED0[40];/*!< Reserved as declared by channel typedef 0x08 - 0xA4 */
+ __IO uint32_t CSELR; /*!< Channel selection register, Address offset: 0xA8 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*! exti[31] Interrupt */
+#define SYSCFG_ITLINE1_SR_VDDIO2_Pos (1U)
+#define SYSCFG_ITLINE1_SR_VDDIO2_Msk (0x1U << SYSCFG_ITLINE1_SR_VDDIO2_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE1_SR_VDDIO2 SYSCFG_ITLINE1_SR_VDDIO2_Msk /*!< VDDIO2 -> exti[16] Interrupt */
+#define SYSCFG_ITLINE2_SR_RTC_ALRA_Pos (0U)
+#define SYSCFG_ITLINE2_SR_RTC_ALRA_Msk (0x1U << SYSCFG_ITLINE2_SR_RTC_ALRA_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE2_SR_RTC_ALRA SYSCFG_ITLINE2_SR_RTC_ALRA_Msk /*!< RTC Alarm -> exti[17] interrupt .... */
+#define SYSCFG_ITLINE2_SR_RTC_TSTAMP_Pos (1U)
+#define SYSCFG_ITLINE2_SR_RTC_TSTAMP_Msk (0x1U << SYSCFG_ITLINE2_SR_RTC_TSTAMP_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE2_SR_RTC_TSTAMP SYSCFG_ITLINE2_SR_RTC_TSTAMP_Msk /*!< RTC Time Stamp -> exti[19] interrupt */
+#define SYSCFG_ITLINE2_SR_RTC_WAKEUP_Pos (2U)
+#define SYSCFG_ITLINE2_SR_RTC_WAKEUP_Msk (0x1U << SYSCFG_ITLINE2_SR_RTC_WAKEUP_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE2_SR_RTC_WAKEUP SYSCFG_ITLINE2_SR_RTC_WAKEUP_Msk /*!< RTC WAKEUP -> exti[20] Interrupt */
+#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (0U)
+#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1U << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< Flash ITF Interrupt */
+#define SYSCFG_ITLINE4_SR_CRS_Pos (0U)
+#define SYSCFG_ITLINE4_SR_CRS_Msk (0x1U << SYSCFG_ITLINE4_SR_CRS_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE4_SR_CRS SYSCFG_ITLINE4_SR_CRS_Msk /*!< CRS interrupt */
+#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (1U)
+#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1U << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< CLK CTRL interrupt */
+#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U)
+#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1U << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */
+#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U)
+#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1U << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */
+#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U)
+#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1U << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */
+#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U)
+#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1U << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */
+#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U)
+#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U)
+#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U)
+#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U)
+#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */
+#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U)
+#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */
+#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U)
+#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */
+#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U)
+#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */
+#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U)
+#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */
+#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U)
+#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */
+#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U)
+#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */
+#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U)
+#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */
+#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U)
+#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */
+#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE8_SR_TSC_EOA_Pos (0U)
+#define SYSCFG_ITLINE8_SR_TSC_EOA_Msk (0x1U << SYSCFG_ITLINE8_SR_TSC_EOA_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE8_SR_TSC_EOA SYSCFG_ITLINE8_SR_TSC_EOA_Msk /*!< Touch control EOA Interrupt */
+#define SYSCFG_ITLINE8_SR_TSC_MCE_Pos (1U)
+#define SYSCFG_ITLINE8_SR_TSC_MCE_Msk (0x1U << SYSCFG_ITLINE8_SR_TSC_MCE_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE8_SR_TSC_MCE SYSCFG_ITLINE8_SR_TSC_MCE_Msk /*!< Touch control MCE Interrupt */
+#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U)
+#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1U << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U)
+#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1U << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U)
+#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1U << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA2_CH1_Pos (2U)
+#define SYSCFG_ITLINE10_SR_DMA2_CH1_Msk (0x1U << SYSCFG_ITLINE10_SR_DMA2_CH1_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE10_SR_DMA2_CH1 SYSCFG_ITLINE10_SR_DMA2_CH1_Msk /*!< DMA2 Channel 1 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA2_CH2_Pos (3U)
+#define SYSCFG_ITLINE10_SR_DMA2_CH2_Msk (0x1U << SYSCFG_ITLINE10_SR_DMA2_CH2_Pos) /*!< 0x00000008 */
+#define SYSCFG_ITLINE10_SR_DMA2_CH2 SYSCFG_ITLINE10_SR_DMA2_CH2_Msk /*!< DMA2 Channel 2 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (0U)
+#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (1U)
+#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (2U)
+#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (3U)
+#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000008 */
+#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA2_CH3_Pos (4U)
+#define SYSCFG_ITLINE11_SR_DMA2_CH3_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA2_CH3_Pos) /*!< 0x00000010 */
+#define SYSCFG_ITLINE11_SR_DMA2_CH3 SYSCFG_ITLINE11_SR_DMA2_CH3_Msk /*!< DMA2 Channel 3 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA2_CH4_Pos (5U)
+#define SYSCFG_ITLINE11_SR_DMA2_CH4_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA2_CH4_Pos) /*!< 0x00000020 */
+#define SYSCFG_ITLINE11_SR_DMA2_CH4 SYSCFG_ITLINE11_SR_DMA2_CH4_Msk /*!< DMA2 Channel 4 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA2_CH5_Pos (6U)
+#define SYSCFG_ITLINE11_SR_DMA2_CH5_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA2_CH5_Pos) /*!< 0x00000040 */
+#define SYSCFG_ITLINE11_SR_DMA2_CH5 SYSCFG_ITLINE11_SR_DMA2_CH5_Msk /*!< DMA2 Channel 5 Interrupt */
+#define SYSCFG_ITLINE12_SR_ADC_Pos (0U)
+#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1U << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */
+#define SYSCFG_ITLINE12_SR_COMP1_Pos (1U)
+#define SYSCFG_ITLINE12_SR_COMP1_Msk (0x1U << SYSCFG_ITLINE12_SR_COMP1_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE12_SR_COMP1 SYSCFG_ITLINE12_SR_COMP1_Msk /*!< COMP1 Interrupt -> exti[21] */
+#define SYSCFG_ITLINE12_SR_COMP2_Pos (2U)
+#define SYSCFG_ITLINE12_SR_COMP2_Msk (0x1U << SYSCFG_ITLINE12_SR_COMP2_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE12_SR_COMP2 SYSCFG_ITLINE12_SR_COMP2_Msk /*!< COMP2 Interrupt -> exti[22] */
+#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (0U)
+#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1U << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */
+#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (1U)
+#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1U << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */
+#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (2U)
+#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1U << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */
+#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (3U)
+#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1U << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000008 */
+#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */
+#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U)
+#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1U << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */
+#define SYSCFG_ITLINE15_SR_TIM2_GLB_Pos (0U)
+#define SYSCFG_ITLINE15_SR_TIM2_GLB_Msk (0x1U << SYSCFG_ITLINE15_SR_TIM2_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE15_SR_TIM2_GLB SYSCFG_ITLINE15_SR_TIM2_GLB_Msk /*!< TIM2 GLB Interrupt */
+#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U)
+#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1U << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */
+#define SYSCFG_ITLINE17_SR_DAC_Pos (0U)
+#define SYSCFG_ITLINE17_SR_DAC_Msk (0x1U << SYSCFG_ITLINE17_SR_DAC_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE17_SR_DAC SYSCFG_ITLINE17_SR_DAC_Msk /*!< DAC Interrupt */
+#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (1U)
+#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1U << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */
+#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U)
+#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1U << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */
+#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U)
+#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1U << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */
+#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U)
+#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1U << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */
+#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U)
+#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1U << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */
+#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U)
+#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1U << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */
+#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U)
+#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1U << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */
+#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U)
+#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1U << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt */
+#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U)
+#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1U << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */
+#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U)
+#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1U << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */
+#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U)
+#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1U << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */
+#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U)
+#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1U << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */
+#define SYSCFG_ITLINE29_SR_USART3_GLB_Pos (0U)
+#define SYSCFG_ITLINE29_SR_USART3_GLB_Msk (0x1U << SYSCFG_ITLINE29_SR_USART3_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE29_SR_USART3_GLB SYSCFG_ITLINE29_SR_USART3_GLB_Msk /*!< USART3 GLB Interrupt -> exti[28] */
+#define SYSCFG_ITLINE29_SR_USART4_GLB_Pos (1U)
+#define SYSCFG_ITLINE29_SR_USART4_GLB_Msk (0x1U << SYSCFG_ITLINE29_SR_USART4_GLB_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE29_SR_USART4_GLB SYSCFG_ITLINE29_SR_USART4_GLB_Msk /*!< USART4 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART5_GLB_Pos (2U)
+#define SYSCFG_ITLINE29_SR_USART5_GLB_Msk (0x1U << SYSCFG_ITLINE29_SR_USART5_GLB_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE29_SR_USART5_GLB SYSCFG_ITLINE29_SR_USART5_GLB_Msk /*!< USART5 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART6_GLB_Pos (3U)
+#define SYSCFG_ITLINE29_SR_USART6_GLB_Msk (0x1U << SYSCFG_ITLINE29_SR_USART6_GLB_Pos) /*!< 0x00000008 */
+#define SYSCFG_ITLINE29_SR_USART6_GLB SYSCFG_ITLINE29_SR_USART6_GLB_Msk /*!< USART6 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART7_GLB_Pos (4U)
+#define SYSCFG_ITLINE29_SR_USART7_GLB_Msk (0x1U << SYSCFG_ITLINE29_SR_USART7_GLB_Pos) /*!< 0x00000010 */
+#define SYSCFG_ITLINE29_SR_USART7_GLB SYSCFG_ITLINE29_SR_USART7_GLB_Msk /*!< USART7 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART8_GLB_Pos (5U)
+#define SYSCFG_ITLINE29_SR_USART8_GLB_Msk (0x1U << SYSCFG_ITLINE29_SR_USART8_GLB_Pos) /*!< 0x00000020 */
+#define SYSCFG_ITLINE29_SR_USART8_GLB SYSCFG_ITLINE29_SR_USART8_GLB_Msk /*!< USART8 GLB Interrupt */
+#define SYSCFG_ITLINE30_SR_CAN_Pos (0U)
+#define SYSCFG_ITLINE30_SR_CAN_Msk (0x1U << SYSCFG_ITLINE30_SR_CAN_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE30_SR_CAN SYSCFG_ITLINE30_SR_CAN_Msk /*!< CAN Interrupt */
+#define SYSCFG_ITLINE30_SR_CEC_Pos (1U)
+#define SYSCFG_ITLINE30_SR_CEC_Msk (0x1U << SYSCFG_ITLINE30_SR_CEC_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE30_SR_CEC SYSCFG_ITLINE30_SR_CEC_Msk /*!< CEC Interrupt */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN_Pos (0U)
+#define TIM_CR1_CEN_Msk (0x1U << TIM_CR1_CEN_Pos) /*!< 0x00000001 */
+#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f098xx
+ * @{
+ */
+
+#ifndef __STM32F098xx_H
+#define __STM32F098xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F0 specific Interrupt Numbers ******************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ VDDIO2_IRQn = 1, /*!< VDDIO2 Interrupt through EXTI Line 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Ch1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Ch2_3_DMA2_Ch1_2_IRQn = 10, /*!< DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 Interrupts */
+ DMA1_Ch4_7_DMA2_Ch3_5_IRQn = 11, /*!< DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 Interrupt */
+ ADC1_COMP_IRQn = 12, /*!< ADC1 and COMP interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupt */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_8_IRQn = 29, /*!< USART3 to USART8 global Interrupt */
+ CEC_CAN_IRQn = 30 /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+}CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+}CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+}CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+}CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< COMP control and status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */
+} COMP_Common_TypeDef;
+
+/* Legacy defines */
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Kept for legacy purpose. Use structure 'COMP_Common_TypeDef'. */
+}COMP1_2_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+ uint32_t RESERVED0[40];/*!< Reserved as declared by channel typedef 0x08 - 0xA4 */
+ __IO uint32_t CSELR; /*!< Channel selection register, Address offset: 0xA8 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*! exti[16] Interrupt */
+#define SYSCFG_ITLINE2_SR_RTC_ALRA_Pos (0U)
+#define SYSCFG_ITLINE2_SR_RTC_ALRA_Msk (0x1U << SYSCFG_ITLINE2_SR_RTC_ALRA_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE2_SR_RTC_ALRA SYSCFG_ITLINE2_SR_RTC_ALRA_Msk /*!< RTC Alarm -> exti[17] interrupt .... */
+#define SYSCFG_ITLINE2_SR_RTC_TSTAMP_Pos (1U)
+#define SYSCFG_ITLINE2_SR_RTC_TSTAMP_Msk (0x1U << SYSCFG_ITLINE2_SR_RTC_TSTAMP_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE2_SR_RTC_TSTAMP SYSCFG_ITLINE2_SR_RTC_TSTAMP_Msk /*!< RTC Time Stamp -> exti[19] interrupt */
+#define SYSCFG_ITLINE2_SR_RTC_WAKEUP_Pos (2U)
+#define SYSCFG_ITLINE2_SR_RTC_WAKEUP_Msk (0x1U << SYSCFG_ITLINE2_SR_RTC_WAKEUP_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE2_SR_RTC_WAKEUP SYSCFG_ITLINE2_SR_RTC_WAKEUP_Msk /*!< RTC WAKEUP -> exti[20] Interrupt */
+#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (0U)
+#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1U << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< Flash ITF Interrupt */
+#define SYSCFG_ITLINE4_SR_CRS_Pos (0U)
+#define SYSCFG_ITLINE4_SR_CRS_Msk (0x1U << SYSCFG_ITLINE4_SR_CRS_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE4_SR_CRS SYSCFG_ITLINE4_SR_CRS_Msk /*!< CRS interrupt */
+#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (1U)
+#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1U << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< CLK CTRL interrupt */
+#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U)
+#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1U << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */
+#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U)
+#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1U << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */
+#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U)
+#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1U << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */
+#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U)
+#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1U << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */
+#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U)
+#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U)
+#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U)
+#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U)
+#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */
+#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U)
+#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */
+#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U)
+#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */
+#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U)
+#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */
+#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U)
+#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */
+#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U)
+#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */
+#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U)
+#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */
+#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U)
+#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */
+#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U)
+#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1U << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */
+#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE8_SR_TSC_EOA_Pos (0U)
+#define SYSCFG_ITLINE8_SR_TSC_EOA_Msk (0x1U << SYSCFG_ITLINE8_SR_TSC_EOA_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE8_SR_TSC_EOA SYSCFG_ITLINE8_SR_TSC_EOA_Msk /*!< Touch control EOA Interrupt */
+#define SYSCFG_ITLINE8_SR_TSC_MCE_Pos (1U)
+#define SYSCFG_ITLINE8_SR_TSC_MCE_Msk (0x1U << SYSCFG_ITLINE8_SR_TSC_MCE_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE8_SR_TSC_MCE SYSCFG_ITLINE8_SR_TSC_MCE_Msk /*!< Touch control MCE Interrupt */
+#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U)
+#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1U << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U)
+#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1U << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U)
+#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1U << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA2_CH1_Pos (2U)
+#define SYSCFG_ITLINE10_SR_DMA2_CH1_Msk (0x1U << SYSCFG_ITLINE10_SR_DMA2_CH1_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE10_SR_DMA2_CH1 SYSCFG_ITLINE10_SR_DMA2_CH1_Msk /*!< DMA2 Channel 1 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA2_CH2_Pos (3U)
+#define SYSCFG_ITLINE10_SR_DMA2_CH2_Msk (0x1U << SYSCFG_ITLINE10_SR_DMA2_CH2_Pos) /*!< 0x00000008 */
+#define SYSCFG_ITLINE10_SR_DMA2_CH2 SYSCFG_ITLINE10_SR_DMA2_CH2_Msk /*!< DMA2 Channel 2 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (0U)
+#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (1U)
+#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (2U)
+#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (3U)
+#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000008 */
+#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA2_CH3_Pos (4U)
+#define SYSCFG_ITLINE11_SR_DMA2_CH3_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA2_CH3_Pos) /*!< 0x00000010 */
+#define SYSCFG_ITLINE11_SR_DMA2_CH3 SYSCFG_ITLINE11_SR_DMA2_CH3_Msk /*!< DMA2 Channel 3 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA2_CH4_Pos (5U)
+#define SYSCFG_ITLINE11_SR_DMA2_CH4_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA2_CH4_Pos) /*!< 0x00000020 */
+#define SYSCFG_ITLINE11_SR_DMA2_CH4 SYSCFG_ITLINE11_SR_DMA2_CH4_Msk /*!< DMA2 Channel 4 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA2_CH5_Pos (6U)
+#define SYSCFG_ITLINE11_SR_DMA2_CH5_Msk (0x1U << SYSCFG_ITLINE11_SR_DMA2_CH5_Pos) /*!< 0x00000040 */
+#define SYSCFG_ITLINE11_SR_DMA2_CH5 SYSCFG_ITLINE11_SR_DMA2_CH5_Msk /*!< DMA2 Channel 5 Interrupt */
+#define SYSCFG_ITLINE12_SR_ADC_Pos (0U)
+#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1U << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */
+#define SYSCFG_ITLINE12_SR_COMP1_Pos (1U)
+#define SYSCFG_ITLINE12_SR_COMP1_Msk (0x1U << SYSCFG_ITLINE12_SR_COMP1_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE12_SR_COMP1 SYSCFG_ITLINE12_SR_COMP1_Msk /*!< COMP1 Interrupt -> exti[21] */
+#define SYSCFG_ITLINE12_SR_COMP2_Pos (2U)
+#define SYSCFG_ITLINE12_SR_COMP2_Msk (0x1U << SYSCFG_ITLINE12_SR_COMP2_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE12_SR_COMP2 SYSCFG_ITLINE12_SR_COMP2_Msk /*!< COMP2 Interrupt -> exti[22] */
+#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (0U)
+#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1U << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */
+#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (1U)
+#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1U << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */
+#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (2U)
+#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1U << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */
+#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (3U)
+#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1U << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000008 */
+#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */
+#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U)
+#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1U << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */
+#define SYSCFG_ITLINE15_SR_TIM2_GLB_Pos (0U)
+#define SYSCFG_ITLINE15_SR_TIM2_GLB_Msk (0x1U << SYSCFG_ITLINE15_SR_TIM2_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE15_SR_TIM2_GLB SYSCFG_ITLINE15_SR_TIM2_GLB_Msk /*!< TIM2 GLB Interrupt */
+#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U)
+#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1U << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */
+#define SYSCFG_ITLINE17_SR_DAC_Pos (0U)
+#define SYSCFG_ITLINE17_SR_DAC_Msk (0x1U << SYSCFG_ITLINE17_SR_DAC_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE17_SR_DAC SYSCFG_ITLINE17_SR_DAC_Msk /*!< DAC Interrupt */
+#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (1U)
+#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1U << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */
+#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U)
+#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1U << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */
+#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U)
+#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1U << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */
+#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U)
+#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1U << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */
+#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U)
+#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1U << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */
+#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U)
+#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1U << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */
+#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U)
+#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1U << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */
+#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U)
+#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1U << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt */
+#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U)
+#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1U << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */
+#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U)
+#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1U << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */
+#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U)
+#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1U << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */
+#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U)
+#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1U << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */
+#define SYSCFG_ITLINE29_SR_USART3_GLB_Pos (0U)
+#define SYSCFG_ITLINE29_SR_USART3_GLB_Msk (0x1U << SYSCFG_ITLINE29_SR_USART3_GLB_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE29_SR_USART3_GLB SYSCFG_ITLINE29_SR_USART3_GLB_Msk /*!< USART3 GLB Interrupt -> exti[28] */
+#define SYSCFG_ITLINE29_SR_USART4_GLB_Pos (1U)
+#define SYSCFG_ITLINE29_SR_USART4_GLB_Msk (0x1U << SYSCFG_ITLINE29_SR_USART4_GLB_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE29_SR_USART4_GLB SYSCFG_ITLINE29_SR_USART4_GLB_Msk /*!< USART4 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART5_GLB_Pos (2U)
+#define SYSCFG_ITLINE29_SR_USART5_GLB_Msk (0x1U << SYSCFG_ITLINE29_SR_USART5_GLB_Pos) /*!< 0x00000004 */
+#define SYSCFG_ITLINE29_SR_USART5_GLB SYSCFG_ITLINE29_SR_USART5_GLB_Msk /*!< USART5 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART6_GLB_Pos (3U)
+#define SYSCFG_ITLINE29_SR_USART6_GLB_Msk (0x1U << SYSCFG_ITLINE29_SR_USART6_GLB_Pos) /*!< 0x00000008 */
+#define SYSCFG_ITLINE29_SR_USART6_GLB SYSCFG_ITLINE29_SR_USART6_GLB_Msk /*!< USART6 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART7_GLB_Pos (4U)
+#define SYSCFG_ITLINE29_SR_USART7_GLB_Msk (0x1U << SYSCFG_ITLINE29_SR_USART7_GLB_Pos) /*!< 0x00000010 */
+#define SYSCFG_ITLINE29_SR_USART7_GLB SYSCFG_ITLINE29_SR_USART7_GLB_Msk /*!< USART7 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART8_GLB_Pos (5U)
+#define SYSCFG_ITLINE29_SR_USART8_GLB_Msk (0x1U << SYSCFG_ITLINE29_SR_USART8_GLB_Pos) /*!< 0x00000020 */
+#define SYSCFG_ITLINE29_SR_USART8_GLB SYSCFG_ITLINE29_SR_USART8_GLB_Msk /*!< USART8 GLB Interrupt */
+#define SYSCFG_ITLINE30_SR_CAN_Pos (0U)
+#define SYSCFG_ITLINE30_SR_CAN_Msk (0x1U << SYSCFG_ITLINE30_SR_CAN_Pos) /*!< 0x00000001 */
+#define SYSCFG_ITLINE30_SR_CAN SYSCFG_ITLINE30_SR_CAN_Msk /*!< CAN Interrupt */
+#define SYSCFG_ITLINE30_SR_CEC_Pos (1U)
+#define SYSCFG_ITLINE30_SR_CEC_Msk (0x1U << SYSCFG_ITLINE30_SR_CEC_Pos) /*!< 0x00000002 */
+#define SYSCFG_ITLINE30_SR_CEC SYSCFG_ITLINE30_SR_CEC_Msk /*!< CEC Interrupt */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN_Pos (0U)
+#define TIM_CR1_CEN_Msk (0x1U << TIM_CR1_CEN_Pos) /*!< 0x00000001 */
+#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f0xx
+ * @{
+ */
+
+#ifndef __STM32F0xx_H
+#define __STM32F0xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F0)
+#define STM32F0
+#endif /* STM32F0 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F030x6) && !defined (STM32F030x8) && \
+ !defined (STM32F031x6) && !defined (STM32F038xx) && \
+ !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \
+ !defined (STM32F051x8) && !defined (STM32F058xx) && \
+ !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \
+ !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC)
+ /* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */
+ /* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F038xx */ /*!< STM32F038xx Devices (STM32F038xx microcontrollers where the Flash memory is 32 Kbytes) */
+ /* #define STM32F042x6 */ /*!< STM32F042x4, STM32F042x6 Devices (STM32F042xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F048x6 */ /*!< STM32F048xx Devices (STM32F042xx microcontrollers where the Flash memory is 32 Kbytes) */
+ /* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */
+ /* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */
+ /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
+ /* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
+ /* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
+ /* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */
+ /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */
+ /* #define STM32F091xC */ /*!< STM32F091xB, STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory ranges between 128 and 256 Kbytes) */
+ /* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.3.3
+ */
+#define __STM32F0_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F0_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
+#define __STM32F0_DEVICE_VERSION_SUB2 (0x03) /*!< [15:8] sub2 version */
+#define __STM32F0_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F0_DEVICE_VERSION ((__STM32F0_DEVICE_VERSION_MAIN << 24)\
+ |(__STM32F0_DEVICE_VERSION_SUB1 << 16)\
+ |(__STM32F0_DEVICE_VERSION_SUB2 << 8 )\
+ |(__STM32F0_DEVICE_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F030x6)
+ #include "stm32f030x6.h"
+#elif defined(STM32F030x8)
+ #include "stm32f030x8.h"
+#elif defined(STM32F031x6)
+ #include "stm32f031x6.h"
+#elif defined(STM32F038xx)
+ #include "stm32f038xx.h"
+#elif defined(STM32F042x6)
+ #include "stm32f042x6.h"
+#elif defined(STM32F048xx)
+ #include "stm32f048xx.h"
+#elif defined(STM32F051x8)
+ #include "stm32f051x8.h"
+#elif defined(STM32F058xx)
+ #include "stm32f058xx.h"
+#elif defined(STM32F070x6)
+ #include "stm32f070x6.h"
+#elif defined(STM32F070xB)
+ #include "stm32f070xb.h"
+#elif defined(STM32F071xB)
+ #include "stm32f071xb.h"
+#elif defined(STM32F072xB)
+ #include "stm32f072xb.h"
+#elif defined(STM32F078xx)
+ #include "stm32f078xx.h"
+#elif defined(STM32F091xC)
+ #include "stm32f091xc.h"
+#elif defined(STM32F098xx)
+ #include "stm32f098xx.h"
+#elif defined(STM32F030xC)
+ #include "stm32f030xc.h"
+#else
+ #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f0xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F0xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/stm32f0/include/system_stm32f0xx.h b/lib/stm32f0/include/system_stm32f0xx.h
new file mode 100644
index 00000000..4daf83e4
--- /dev/null
+++ b/lib/stm32f0/include/system_stm32f0xx.h
@@ -0,0 +1,121 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f0xx.h
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M0 Device System Source File for STM32F0xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f0xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F0XX_H
+#define __SYSTEM_STM32F0XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F0xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F0xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 3) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) by calling HAL API function HAL_RCC_ClockConfig()
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
+extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F0XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/stm32f0/system_stm32f0xx.c b/lib/stm32f0/system_stm32f0xx.c
new file mode 100644
index 00000000..36b46525
--- /dev/null
+++ b/lib/stm32f0/system_stm32f0xx.c
@@ -0,0 +1,333 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f0xx.c
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File.
+ *
+ * 1. This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f0xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32f0xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * 3. This file configures the system clock as follows:
+ *=============================================================================
+ * Supported STM32F0xx device
+ *-----------------------------------------------------------------------------
+ * System Clock source | HSI
+ *-----------------------------------------------------------------------------
+ * SYSCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * HCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * AHB Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB1 Prescaler | 1
+ *-----------------------------------------------------------------------------
+ *=============================================================================
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f0xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f0xx.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Defines
+ * @{
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE ((uint32_t)48000000) /*!< Default value of the HSI48 Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI48_VALUE */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock there is no need to
+ call the 2 first functions listed above, since SystemCoreClock variable is
+ updated automatically.
+ */
+uint32_t SystemCoreClock = 8000000;
+
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system.
+ * Initialize the default HSI clock source, vector table location and the PLL configuration is reset.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001U;
+
+#if defined (STM32F051x8) || defined (STM32F058x8)
+ /* Reset SW[1:0], HPRE[3:0], PPRE[2:0], ADCPRE and MCOSEL[2:0] bits */
+ RCC->CFGR &= (uint32_t)0xF8FFB80CU;
+#else
+ /* Reset SW[1:0], HPRE[3:0], PPRE[2:0], ADCPRE, MCOSEL[2:0], MCOPRE[2:0] and PLLNODIV bits */
+ RCC->CFGR &= (uint32_t)0x08FFB80CU;
+#endif /* STM32F051x8 or STM32F058x8 */
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFFU;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFFU;
+
+ /* Reset PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */
+ RCC->CFGR &= (uint32_t)0xFFC0FFFFU;
+
+ /* Reset PREDIV[3:0] bits */
+ RCC->CFGR2 &= (uint32_t)0xFFFFFFF0U;
+
+#if defined (STM32F072xB) || defined (STM32F078xx)
+ /* Reset USART2SW[1:0], USART1SW[1:0], I2C1SW, CECSW, USBSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFCFE2CU;
+#elif defined (STM32F071xB)
+ /* Reset USART2SW[1:0], USART1SW[1:0], I2C1SW, CECSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFCEACU;
+#elif defined (STM32F091xC) || defined (STM32F098xx)
+ /* Reset USART3SW[1:0], USART2SW[1:0], USART1SW[1:0], I2C1SW, CECSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFF0FEACU;
+#elif defined (STM32F030x6) || defined (STM32F030x8) || defined (STM32F031x6) || defined (STM32F038xx) || defined (STM32F030xC)
+ /* Reset USART1SW[1:0], I2C1SW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFFEECU;
+#elif defined (STM32F051x8) || defined (STM32F058xx)
+ /* Reset USART1SW[1:0], I2C1SW, CECSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFFEACU;
+#elif defined (STM32F042x6) || defined (STM32F048xx)
+ /* Reset USART1SW[1:0], I2C1SW, CECSW, USBSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFFE2CU;
+#elif defined (STM32F070x6) || defined (STM32F070xB)
+ /* Reset USART1SW[1:0], I2C1SW, USBSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFFE6CU;
+ /* Set default USB clock to PLLCLK, since there is no HSI48 */
+ RCC->CFGR3 |= (uint32_t)0x00000080U;
+#else
+ #warning "No target selected"
+#endif
+
+ /* Reset HSI14 bit */
+ RCC->CR2 &= (uint32_t)0xFFFFFFFEU;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000U;
+
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f0xx_hal.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f0xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case RCC_CFGR_SWS_PLL: /* PLL used as system clock */
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+ pllmull = ( pllmull >> 18) + 2;
+ predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+
+ if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+ {
+ /* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */
+ SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull;
+ }
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+ else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV)
+ {
+ /* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */
+ SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull;
+ }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+ else
+ {
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) \
+ || defined(STM32F078xx) || defined(STM32F071xB) || defined(STM32F072xB) \
+ || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ /* HSI used as PLL clock source : SystemCoreClock = HSI/PREDIV * PLLMUL */
+ SystemCoreClock = (HSI_VALUE/predivfactor) * pllmull;
+#else
+ /* HSI used as PLL clock source : SystemCoreClock = HSI/2 * PLLMUL */
+ SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 ||
+ STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB ||
+ STM32F091xC || STM32F098xx || STM32F030xC */
+ }
+ break;
+ default: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK clock frequency ----------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+