3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Minor comment changes to example-extras.cfg 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-11-28 10:32:23 -05:00
parent 73e84abaff
commit 7bd96950cb
1 changed files with 13 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
config/example-extras.cfg
View File

@ -1090,7 +1090,7 @@
# provided.
#chain_count:
# The number of Neopixel chips that are "daisy chained" to the
# provided pin. The default is 1 (which indices only a single
# provided pin. The default is 1 (which indicates only a single
# Neopixel is connected to the pin).
#color_order_GRB: True
# Set the pixel order to green, red, blue. If using the WS2811 chip
@ -1118,8 +1118,8 @@
#initial_BLUE: 0.0
# See the "neopixel" section for information on these parameters.
# Execute gcode when a button is pressed or released (or when a pin changes
# state). You can check the state of the button my using
# Execute gcode when a button is pressed or released (or when a pin
# changes state). You can check the state of the button by using
# QUERY_BUTTON button=my_gcode_button
#[gcode_button my_gcode_button]
#pin:
@ -1158,8 +1158,8 @@
# is 0 (for low voltage).
#cycle_time: 0.100
# The amount of time (in seconds) per PWM cycle. It is recommended
# this be 10 milliseconds or greater when using software based
# PWM. The default is 0.100 seconds for pwm pins.
# this be 10 milliseconds or greater when using software based PWM.
# The default is 0.100 seconds for pwm pins.
#hardware_pwm: False
# Enable this to use hardware PWM instead of software PWM. When
# using hardware PWM the actual cycle time is constrained by the
@ -1576,8 +1576,8 @@
# The value to statically set the given MCP4451 "wiper" to. This is
# typically set to a number between 0.0 and 1.0 with 1.0 being the
# highest resistance and 0.0 being the lowest resistance. However,
# the range may be changed with the 'scale' parameter (see
# below). If a wiper is not specified then it is left unconfigured.
# the range may be changed with the 'scale' parameter (see below).
# If a wiper is not specified then it is left unconfigured.
#scale:
# This parameter can be used to alter how the 'wiper_x' parameters
# are interpreted. If provided, then the 'wiper_x' parameters should
@ -1604,8 +1604,8 @@
#channel_d:
# The value to statically set the given MCP4728 channel to. This is
# typically set to a number between 0.0 and 1.0 with 1.0 being the
# highest voltage (2.048V) and 0.0 being the lowest voltage. However,
# the range may be changed with the 'scale' parameter (see
# highest voltage (2.048V) and 0.0 being the lowest voltage.
# However, the range may be changed with the 'scale' parameter (see
# below). If a channel is not specified then it is left
# unconfigured.
#scale:
@ -1630,8 +1630,8 @@
# The value to statically set the given MCP4018 "wiper" to. This is
# typically set to a number between 0.0 and 1.0 with 1.0 being the
# highest resistance and 0.0 being the lowest resistance. However,
# the range may be changed with the 'scale' parameter (see
# below). This parameter must be provided.
# the range may be changed with the 'scale' parameter (see below).
# This parameter must be provided.
#scale:
# This parameter can be used to alter how the 'wiper' parameter is
# interpreted. If provided, then the 'wiper' parameter should be
@ -1654,8 +1654,8 @@
# in "RepRapDiscount 2004 Smart Controller" type displays), "st7920"
# (which is used in "RepRapDiscount 12864 Full Graphic Smart
# Controller" type displays), "uc1701" (which is used in "MKS Mini
# 12864" type displays), "ssd1306", or "sh1106". This parameter must be
# provided.
# 12864" type displays), "ssd1306", or "sh1106". This parameter must
# be provided.
#rs_pin:
#e_pin:
#d4_pin: