3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Don't use arduino mega aliases in example config files 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-03-19 12:52:21 -04:00
parent d386500788
commit 7a443e50e1
21 changed files with 609 additions and 631 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

57
config/generic-gt2560.cfg
View File

@ -5,49 +5,49 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar25 step_pin: PA3
dir_pin: ar23 dir_pin: PA1
enable_pin: !ar27 enable_pin: !PA5
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar22 endstop_pin: ^PA0
position_endstop: 0 position_endstop: 0
position_max: 200 position_max: 200
homing_speed: 30 homing_speed: 30
[stepper_y] [stepper_y]
step_pin: ar31 step_pin: PC6
dir_pin: ar33 dir_pin: PC4
enable_pin: !ar29 enable_pin: !PA7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar26 endstop_pin: ^PA4
position_endstop: 0 position_endstop: 0
position_max: 200 position_max: 200
homing_speed: 30 homing_speed: 30
[stepper_z] [stepper_z]
step_pin: ar37 step_pin: PC0
dir_pin: !ar39 dir_pin: !PG2
enable_pin: !ar35 enable_pin: !PC2
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^ar30 endstop_pin: ^PC7
position_endstop: 0 position_endstop: 0
position_max: 200 position_max: 200
position_min: 0.0 position_min: 0.0
[extruder] [extruder]
step_pin: ar43 step_pin: PL6
dir_pin: ar45 dir_pin: PL4
enable_pin: !ar41 enable_pin: !PG0
microsteps: 16 microsteps: 16
rotation_distance: 33.500 rotation_distance: 33.500
nozzle_diameter: 0.4 nozzle_diameter: 0.4
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar2 heater_pin: PE4
sensor_type: ATC Semitec 104GT-2 sensor_type: ATC Semitec 104GT-2
sensor_pin: analog8 sensor_pin: PK0
min_temp: 0 min_temp: 0
max_temp: 250 max_temp: 250
control: pid control: pid
@ -56,9 +56,9 @@ pid_ki: 1.774
pid_kd: 125.159 pid_kd: 125.159
[heater_bed] [heater_bed]
heater_pin: ar4 heater_pin: PG5
sensor_type: ATC Semitec 104GT-2 sensor_type: ATC Semitec 104GT-2
sensor_pin: analog10 sensor_pin: PK2
min_temp: 0 min_temp: 0
max_temp: 120 max_temp: 120
control: pid control: pid
@ -67,11 +67,10 @@ pid_ki: 2.898
pid_kd: 342.787 pid_kd: 342.787
[fan] [fan]
pin: ar7 pin: PH4
[mcu] [mcu]
serial: /dev/ttyUSB0 serial: /dev/ttyUSB0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -82,11 +81,11 @@ max_z_accel: 500
[display] [display]
lcd_type: hd44780 lcd_type: hd44780
rs_pin: ar20 rs_pin: PD1
e_pin: ar17 e_pin: PH0
d4_pin: ar16 d4_pin: PH1
d5_pin: ar21 d5_pin: PD0
d6_pin: ar5 d6_pin: PE3
d7_pin: ar6 d7_pin: PH3
encoder_pins: ^ar42, ^ar40 encoder_pins: ^PL7, ^PG1
click_pin: ^!ar19 click_pin: ^!PD2

69
config/generic-ramps.cfg
View File

@ -1,55 +1,55 @@
# This file contains common pin mappings for RAMPS (v1.3 and later) # This file contains common pin mappings for RAMPS (v1.3 and later)
# boards. RAMPS boards typically use a firmware compiled for the AVR # boards. RAMPS boards typically use a firmware compiled for the AVR
# atmega2560 (though other AVR chips are also possible). # atmega2560 (though the atmega1280 is also possible).
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar54 step_pin: PF0
dir_pin: ar55 dir_pin: PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar3 endstop_pin: ^PE5
#endstop_pin: ^ar2 #endstop_pin: ^PE4
position_endstop: 0 position_endstop: 0
position_max: 200 position_max: 200
homing_speed: 50 homing_speed: 50
[stepper_y] [stepper_y]
step_pin: ar60 step_pin: PF6
dir_pin: !ar61 dir_pin: !PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar14 endstop_pin: ^PJ1
#endstop_pin: ^ar15 #endstop_pin: ^PJ0
position_endstop: 0 position_endstop: 0
position_max: 200 position_max: 200
homing_speed: 50 homing_speed: 50
[stepper_z] [stepper_z]
step_pin: ar46 step_pin: PL3
dir_pin: ar48 dir_pin: PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^ar18 endstop_pin: ^PD3
#endstop_pin: ^ar19 #endstop_pin: ^PD2
position_endstop: 0.5 position_endstop: 0.5
position_max: 200 position_max: 200
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: ar28 dir_pin: PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 33.500 rotation_distance: 33.500
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar10 heater_pin: PB4
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_Kp: 22.2 pid_Kp: 22.2
pid_Ki: 1.08 pid_Ki: 1.08
@ -58,27 +58,26 @@ min_temp: 0
max_temp: 250 max_temp: 250
#[extruder1] #[extruder1]
#step_pin: ar36 #step_pin: PC1
#dir_pin: ar34 #dir_pin: PC3
#enable_pin: !ar30 #enable_pin: !PC7
#heater_pin: ar9 #heater_pin: PH6
#sensor_pin: analog15 #sensor_pin: PK7
#... #...
[heater_bed] [heater_bed]
heater_pin: ar8 heater_pin: PH5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14 sensor_pin: PK6
control: watermark control: watermark
min_temp: 0 min_temp: 0
max_temp: 130 max_temp: 130
[fan] [fan]
pin: ar9 pin: PH6
[mcu] [mcu]
serial: /dev/ttyACM0 serial: /dev/ttyACM0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -91,12 +90,12 @@ max_z_accel: 100
[board_pins] [board_pins]
aliases: aliases:
# Common EXP1 header found on many "all-in-one" ramps clones # Common EXP1 header found on many "all-in-one" ramps clones
EXP1_1=ar37, EXP1_3=ar17, EXP1_5=ar23, EXP1_7=ar27, EXP1_9=<GND>, EXP1_1=PC0, EXP1_3=PH0, EXP1_5=PA1, EXP1_7=PA5, EXP1_9=<GND>,
EXP1_2=ar35, EXP1_4=ar16, EXP1_6=ar25, EXP1_8=ar29, EXP1_10=<5V>, EXP1_2=PC2, EXP1_4=PH1, EXP1_6=PA3, EXP1_8=PA7, EXP1_10=<5V>,
# EXP2 header # EXP2 header
EXP2_1=ar50, EXP2_3=ar31, EXP2_5=ar33, EXP2_7=ar49, EXP2_9=<GND>, EXP2_1=PB3, EXP2_3=PC6, EXP2_5=PC4, EXP2_7=PL0, EXP2_9=<GND>,
EXP2_2=ar52, EXP2_4=ar53, EXP2_6=ar51, EXP2_8=ar41, EXP2_10=<RST> EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PG0, EXP2_10=<RST>
# Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi" # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
# Note, some boards wire: EXP2_8=<RST>, EXP2_10=ar41 # Note, some boards wire: EXP2_8=<RST>, EXP2_10=PG0
# See the sample-lcd.cfg file for definitions of common LCD displays. # See the sample-lcd.cfg file for definitions of common LCD displays.

95
config/generic-rumba.cfg
View File

@ -4,51 +4,51 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar17 step_pin: PH0
dir_pin: ar16 dir_pin: PH1
enable_pin: !ar48 enable_pin: !PL1
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar37 endstop_pin: ^PC0
#endstop_pin: ^ar36 #endstop_pin: ^PC1
position_endstop: 0 position_endstop: 0
position_max: 200 position_max: 200
homing_speed: 50 homing_speed: 50
[stepper_y] [stepper_y]
step_pin: ar54 step_pin: PF0
dir_pin: !ar47 dir_pin: !PL2
enable_pin: !ar55 enable_pin: !PF1
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar35 endstop_pin: ^PC2
#endstop_pin: ^ar34 #endstop_pin: ^PC3
position_endstop: 0 position_endstop: 0
position_max: 200 position_max: 200
homing_speed: 50 homing_speed: 50
[stepper_z] [stepper_z]
step_pin: ar57 step_pin: PF3
dir_pin: ar56 dir_pin: PF2
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar33 endstop_pin: ^PC4
#endstop_pin: ^ar32 #endstop_pin: ^PC5
position_endstop: 0.5 position_endstop: 0.5
position_max: 200 position_max: 200
[extruder] [extruder]
step_pin: ar23 step_pin: PA1
dir_pin: ar22 dir_pin: PA0
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 33.500 rotation_distance: 33.500
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar2 heater_pin: PE4
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog15 sensor_pin: PK7
control: pid control: pid
pid_Kp: 22.2 pid_Kp: 22.2
pid_Ki: 1.08 pid_Ki: 1.08
@ -57,38 +57,37 @@ min_temp: 0
max_temp: 250 max_temp: 250
#[extruder1] #[extruder1]
#step_pin: ar26 #step_pin: PA4
#dir_pin: ar25 #dir_pin: PA3
#enable_pin: !ar27 #enable_pin: !PA5
#heater_pin: ar3 #heater_pin: PE5
#sensor_pin: analog14 #sensor_pin: PK6
#... #...
#[extruder2] #[extruder2]
#step_pin: ar29 #step_pin: PA7
#dir_pin: ar28 #dir_pin: PA6
#enable_pin: !ar39 #enable_pin: !PG2
#heater_pin: ar6 #heater_pin: PH3
#sensor_pin: analog13 #sensor_pin: PK5
#... #...
[heater_bed] [heater_bed]
heater_pin: ar9 heater_pin: PH6
sensor_type: NTC 100K beta 3950 sensor_type: NTC 100K beta 3950
sensor_pin: analog11 sensor_pin: PK3
control: watermark control: watermark
min_temp: 0 min_temp: 0
max_temp: 130 max_temp: 130
[fan] [fan]
pin: ar7 pin: PH4
#[heater_fan fan1] #[heater_fan fan1]
#pin: ar8 #pin: PH5
[mcu] [mcu]
serial: /dev/ttyACM0 serial: /dev/ttyACM0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -100,20 +99,20 @@ max_z_accel: 100
# "RepRapDiscount 2004 Smart Controller" type displays # "RepRapDiscount 2004 Smart Controller" type displays
#[display] #[display]
#lcd_type: hd44780 #lcd_type: hd44780
#rs_pin: ar19 #rs_pin: PD2
#e_pin: ar42 #e_pin: PL7
#d4_pin: ar18 #d4_pin: PD3
#d5_pin: ar38 #d5_pin: PD7
#d6_pin: ar41 #d6_pin: PG0
#d7_pin: ar40 #d7_pin: PG1
#encoder_pins: ^ar11, ^ar12 #encoder_pins: ^PB5, ^PB6
#click_pin: ^!ar43 #click_pin: ^!PL6
# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays # "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
#[display] #[display]
#lcd_type: st7920 #lcd_type: st7920
#cs_pin: ar19 #cs_pin: PD2
#sclk_pin: ar18 #sclk_pin: PD3
#sid_pin: ar42 #sid_pin: PL7
#encoder_pins: ^ar11, ^ar12 #encoder_pins: ^PB5, ^PB6
#click_pin: ^!ar43 #click_pin: ^!PL6

59
config/generic-ultimaker-ultimainboard-v2.cfg
View File

@ -5,49 +5,49 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar25 step_pin: PA3
dir_pin: !ar23 dir_pin: !PA1
enable_pin: !ar27 enable_pin: !PA5
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar22 endstop_pin: ^!PA0
position_endstop: 0 position_endstop: 0
position_max: 230 position_max: 230
homing_speed: 50.0 homing_speed: 50.0
[stepper_y] [stepper_y]
step_pin: ar32 step_pin: PC5
dir_pin: ar33 dir_pin: PC4
enable_pin: !ar31 enable_pin: !PC6
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar26 endstop_pin: ^!PA4
position_endstop: 225 position_endstop: 225
position_max: 225 position_max: 225
homing_speed: 50.0 homing_speed: 50.0
[stepper_z] [stepper_z]
step_pin: ar35 step_pin: PC2
dir_pin: !ar36 dir_pin: !PC1
enable_pin: !ar34 enable_pin: !PC3
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar29 endstop_pin: ^!PA7
position_endstop: 215 position_endstop: 215
position_max: 215 position_max: 215
homing_speed: 20.0 homing_speed: 20.0
[extruder] [extruder]
step_pin: ar42 step_pin: PL7
dir_pin: ar43 dir_pin: PL6
enable_pin: !ar37 enable_pin: !PC0
microsteps: 16 microsteps: 16
rotation_distance: 33.500 rotation_distance: 33.500
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 2.850 filament_diameter: 2.850
heater_pin: ar2 heater_pin: PE4
sensor_type: PT100 INA826 sensor_type: PT100 INA826
sensor_pin: analog8 sensor_pin: PK0
control: pid control: pid
pid_Kp: 22.2 pid_Kp: 22.2
pid_Ki: 1.08 pid_Ki: 1.08
@ -57,16 +57,16 @@ max_temp: 275
# Dual extruder support. # Dual extruder support.
#[extruder1] #[extruder1]
#step_pin: ar49 #step_pin: PL0
#dir_pin: ar47 #dir_pin: PL2
#enable_pin: !ar48 #enable_pin: !PL1
#microsteps: 16 #microsteps: 16
#rotation_distance: 33.500 #rotation_distance: 33.500
#nozzle_diameter: 0.400 #nozzle_diameter: 0.400
#filament_diameter: 2.850 #filament_diameter: 2.850
#heater_pin: ar3 #heater_pin: PE5
#sensor_type: PT100 INA826 #sensor_type: PT100 INA826
#sensor_pin: analog9 #sensor_pin: PK1
#control: pid #control: pid
#pid_Kp: 22.2 #pid_Kp: 22.2
#pid_Ki: 1.08 #pid_Ki: 1.08
@ -75,19 +75,18 @@ max_temp: 275
#max_temp: 275 #max_temp: 275
[heater_bed] [heater_bed]
heater_pin: ar4 heater_pin: PG5
sensor_type: PT100 INA826 sensor_type: PT100 INA826
sensor_pin: analog10 sensor_pin: PK2
control: watermark control: watermark
min_temp: 0 min_temp: 0
max_temp: 100 max_temp: 100
[fan] [fan]
pin: ar7 pin: PH4
[mcu] [mcu]
serial: /dev/ttyACM0 serial: /dev/ttyACM0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -97,12 +96,12 @@ max_z_velocity: 25
max_z_accel: 30 max_z_accel: 30
[output_pin case_light] [output_pin case_light]
pin: ar8 pin: PH5
static_value: 1.0 static_value: 1.0
# Motor current settings. # Motor current settings.
[output_pin stepper_xy_current] [output_pin stepper_xy_current]
pin: ar44 pin: PL5
pwm: True pwm: True
scale: 1.5 scale: 1.5
# Max power setting. # Max power setting.
@ -112,7 +111,7 @@ static_value: 1.200
# Power adjustment setting. # Power adjustment setting.
[output_pin stepper_z_current] [output_pin stepper_z_current]
pin: ar45 pin: PL4
pwm: True pwm: True
scale: 1.5 scale: 1.5
cycle_time: .000030 cycle_time: .000030
@ -120,7 +119,7 @@ hardware_pwm: True
static_value: 1.200 static_value: 1.200
[output_pin stepper_e_current] [output_pin stepper_e_current]
pin: ar46 pin: PL3
pwm: True pwm: True
scale: 1.5 scale: 1.5
cycle_time: .000030 cycle_time: .000030

80
config/kit-voron2-250mm.cfg
View File

@ -30,14 +30,12 @@
# Mcu for X/Y/E steppers # Mcu for X/Y/E steppers
serial: /dev/serial/by-id/**INSERT_YOUR_ARDUINO_DEFINITION_HERE** serial: /dev/serial/by-id/**INSERT_YOUR_ARDUINO_DEFINITION_HERE**
# Obtain definition by "ls -l /dev/serial/by-id/" # Obtain definition by "ls -l /dev/serial/by-id/"
pin_map: arduino
restart_method: arduino restart_method: arduino
[mcu z] [mcu z]
# Mcu for Z steppers # Mcu for Z steppers
serial: /dev/serial/by-id/**INSERT_YOUR_ARDUINO_DEFINITION_HERE** serial: /dev/serial/by-id/**INSERT_YOUR_ARDUINO_DEFINITION_HERE**
# Obtain definition by "ls -l /dev/serial/by-id/" # Obtain definition by "ls -l /dev/serial/by-id/"
pin_map: arduino
restart_method: arduino restart_method: arduino
[printer] [printer]
@ -49,14 +47,14 @@ max_z_accel: 350
[stepper_x] [stepper_x]
# B Stepper # B Stepper
step_pin: ar54 step_pin: PF0
dir_pin: !ar55 dir_pin: !PF1
enable_pin: !ar38 enable_pin: !PD7
# X on mcu_xye # X on mcu_xye
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
# 80 steps per mm - 1.8 deg - 1/16 microstepping # 80 steps per mm - 1.8 deg - 1/16 microstepping
endstop_pin: ^ar2 endstop_pin: ^PE4
# X_MAX on mcu_xye # X_MAX on mcu_xye
position_min: 0 position_min: 0
position_endstop: 250 position_endstop: 250
@ -66,14 +64,14 @@ homing_retract_dist: 5
[stepper_y] [stepper_y]
# A Stepper # A Stepper
step_pin: ar60 step_pin: PF6
dir_pin: !ar61 dir_pin: !PF7
enable_pin: !ar56 enable_pin: !PF2
# Y on mcu_xye # Y on mcu_xye
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
# 80 steps per mm - 1.8 deg - 1/16 microstepping # 80 steps per mm - 1.8 deg - 1/16 microstepping
endstop_pin: ^ar15 endstop_pin: ^PJ0
# Y_MAX on mcu_xye # Y_MAX on mcu_xye
position_min: 0 position_min: 0
position_endstop: 250 position_endstop: 250
@ -83,14 +81,14 @@ homing_retract_dist: 5
[stepper_z] [stepper_z]
# Z0 Stepper - Front Left # Z0 Stepper - Front Left
step_pin: z:ar54 step_pin: z:PF0
dir_pin: !z:ar55 dir_pin: !z:PF1
enable_pin: !z:ar38 enable_pin: !z:PD7
# X on mcu_z # X on mcu_z
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
# 400 steps per mm - 1.8 deg - 1/16 microstepping # 400 steps per mm - 1.8 deg - 1/16 microstepping
endstop_pin: ^!z:ar18 endstop_pin: ^!z:PD3
# Z_MIN on mcu_z # Z_MIN on mcu_z
position_endstop: -0.2 position_endstop: -0.2
# Offset (in mm) for nozzle to bed off z switch # Offset (in mm) for nozzle to bed off z switch
@ -103,9 +101,9 @@ homing_retract_dist: 3.0
[stepper_z1] [stepper_z1]
# Z1 Stepper - Rear Left # Z1 Stepper - Rear Left
step_pin: z:ar60 step_pin: z:PF6
dir_pin: z:ar61 dir_pin: z:PF7
enable_pin: !z:ar56 enable_pin: !z:PF2
# Y on mcu_z # Y on mcu_z
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
@ -113,9 +111,9 @@ rotation_distance: 8
[stepper_z2] [stepper_z2]
# Z2 Stepper - Rear Right # Z2 Stepper - Rear Right
step_pin: z:ar46 step_pin: z:PL3
dir_pin: !z:ar48 dir_pin: !z:PL1
enable_pin: !z:ar62 enable_pin: !z:PK0
# Z on mcu_z # Z on mcu_z
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
@ -123,18 +121,18 @@ rotation_distance: 8
[stepper_z3] [stepper_z3]
# Z3 Stepper - Front Right # Z3 Stepper - Front Right
step_pin: z:ar26 step_pin: z:PA4
dir_pin: z:ar28 dir_pin: z:PA6
enable_pin: !z:ar24 enable_pin: !z:PA2
# E0 on mcu_z # E0 on mcu_z
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
# 400 steps per mm - 1.8 deg - 1/16 microstepping # 400 steps per mm - 1.8 deg - 1/16 microstepping
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: ar28 dir_pin: PA6
enable_pin: !ar24 enable_pin: !PA2
# E0 on mcu_xye # E0 on mcu_xye
microsteps: 16 microsteps: 16
rotation_distance: 5.76576 rotation_distance: 5.76576
@ -143,11 +141,11 @@ nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
max_extrude_only_distance: 780.0 max_extrude_only_distance: 780.0
# This is set high to allow the load/unload filament macros to run # This is set high to allow the load/unload filament macros to run
heater_pin: ar10 heater_pin: PB4
# D10 on mcu_xye # D10 on mcu_xye
max_power: 1.0 max_power: 1.0
sensor_type: NTC 100K beta 3950 sensor_type: NTC 100K beta 3950
sensor_pin: analog13 sensor_pin: PK5
# T0 on mcu_xye # T0 on mcu_xye
smooth_time: 3.0 smooth_time: 3.0
control: pid control: pid
@ -160,7 +158,7 @@ max_temp: 270
[probe] [probe]
# Inductive Probe # Inductive Probe
pin: ^z:ar19 pin: ^z:PD2
# Z_MAX on mcu_z # Z_MAX on mcu_z
x_offset: 0.0 x_offset: 0.0
y_offset: 25.0 y_offset: 25.0
@ -173,13 +171,13 @@ sample_retract_dist: 6.0
[fan] [fan]
# Print cooling fan # Print cooling fan
pin: ar9 pin: PH6
# D9 on mcu_xye # D9 on mcu_xye
kick_start_time: 0.500 kick_start_time: 0.500
[heater_fan hotend_fan] [heater_fan hotend_fan]
# Hotend fan # Hotend fan
pin: z:ar9 pin: z:PH6
# D9 on mcu_z # D9 on mcu_z
kick_start_time: 0.500 kick_start_time: 0.500
heater: extruder heater: extruder
@ -187,7 +185,7 @@ heater_temp: 50.0
[heater_fan controller_fan] [heater_fan controller_fan]
# Controller fan # Controller fan
pin: z:ar10 pin: z:PB4
# D10 on mcu_z # D10 on mcu_z
kick_start_time: 0.500 kick_start_time: 0.500
heater: heater_bed heater: heater_bed
@ -195,17 +193,17 @@ heater_temp: 45.0
[heater_fan exhaust_fan] [heater_fan exhaust_fan]
# Exhaust fan # Exhaust fan
pin: z:ar8 pin: z:PH5
# D8 on mcu_z # D8 on mcu_z
kick_start_time: 0.500 kick_start_time: 0.500
heater: heater_bed heater: heater_bed
heater_temp: 60.0 heater_temp: 60.0
[heater_bed] [heater_bed]
heater_pin: z:ar11 heater_pin: z:PB5
# D11 (servo) on mcu_z # D11 (servo) on mcu_z
sensor_type: NTC 100K MGB18-104F39050L32 sensor_type: NTC 100K MGB18-104F39050L32
sensor_pin: z:analog15 sensor_pin: z:PK7
# T2 on mcu_z # T2 on mcu_z
smooth_time: 3.0 smooth_time: 3.0
max_power: 0.75 max_power: 0.75
@ -247,14 +245,14 @@ horizontal_move_z: 6
[display] [display]
# RepRapDiscount 128x64 Full Graphic Smart Controller # RepRapDiscount 128x64 Full Graphic Smart Controller
lcd_type: st7920 lcd_type: st7920
cs_pin: z:ar16 cs_pin: z:PH1
sclk_pin: z:ar23 sclk_pin: z:PA1
sid_pin: z:ar17 sid_pin: z:PH0
# LCD connector on mcu_z # LCD connector on mcu_z
menu_timeout: 40 menu_timeout: 40
encoder_pins: ^z:ar33, ^z:ar31 encoder_pins: ^z:PC4, ^z:PC6
click_pin: ^!z:ar35 click_pin: ^!z:PC2
kill_pin: ^!z:ar41 kill_pin: ^!z:PG0
### Macros ### ### Macros ###

51
config/kit-zav3d-2019.cfg
View File

@ -26,12 +26,12 @@
[stepper_x] [stepper_x]
step_pin: ar54 step_pin: PF0
dir_pin: ar55 dir_pin: PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 32 rotation_distance: 32
endstop_pin: ^ar3 endstop_pin: ^PE5
position_endstop: 0 position_endstop: 0
position_max: 200 position_max: 200
homing_speed: 50 homing_speed: 50
@ -39,25 +39,25 @@ homing_speed: 50
# The stepper_y section is used to describe the Y axis as well as the # The stepper_y section is used to describe the Y axis as well as the
# stepper controlling the X-Y movement. # stepper controlling the X-Y movement.
[stepper_y] [stepper_y]
step_pin: ar60 step_pin: PF6
dir_pin: ar61 dir_pin: PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 32 rotation_distance: 32
endstop_pin: ^ar14 endstop_pin: ^PJ1
position_endstop: 0 position_endstop: 0
position_max: 200 position_max: 200
homing_speed: 50 homing_speed: 50
## Configuration with Z Endstop, without Probe tool like BLTOUCH or others. ## Configuration with Z Endstop, without Probe tool like BLTOUCH or others.
#[stepper_z] #[stepper_z]
#step_pin: ar46 #step_pin: PL3
#dir_pin: ar48 #dir_pin: PL1
#enable_pin: !ar62 #enable_pin: !PK0
#microsteps: 16 #microsteps: 16
#rotation_distance: 8 #rotation_distance: 8
## I used Z_MAX_ENDSTOP ## I used Z_MAX_ENDSTOP
#endstop_pin: ^ar19 #endstop_pin: ^PD2
## More about z-calibration is here https://vk.com/topic-107680682_34101598 ## More about z-calibration is here https://vk.com/topic-107680682_34101598
#position_endstop: 235 #position_endstop: 235
#position_max: 235 #position_max: 235
@ -66,9 +66,9 @@ homing_speed: 50
## Configuration for Bltouch probe tool. ## Configuration for Bltouch probe tool.
## Read more about BLTOUCH here https://www.klipper3d.org/BLTouch.html ## Read more about BLTOUCH here https://www.klipper3d.org/BLTouch.html
[stepper_z] [stepper_z]
step_pin: ar46 step_pin: PL3
dir_pin: ar48 dir_pin: PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
position_min: -3 position_min: -3
@ -78,16 +78,16 @@ endstop_pin: probe:z_virtual_endstop
## Configuration with PID Calibration. ## Configuration with PID Calibration.
## Read more here https://www.klipper3d.org/Config_checks.html ## Read more here https://www.klipper3d.org/Config_checks.html
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: !ar28 dir_pin: !PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 13.5744 rotation_distance: 13.5744
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar10 heater_pin: PB4
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13 sensor_pin: PK5
min_temp: 0 min_temp: 0
max_temp: 250 max_temp: 250
control: pid control: pid
@ -98,9 +98,9 @@ pid_kd: 151.598
## Configuration with PID Calibration. ## Configuration with PID Calibration.
## Read more here https://www.klipper3d.org/Config_checks.html ## Read more here https://www.klipper3d.org/Config_checks.html
[heater_bed] [heater_bed]
heater_pin: ar8 heater_pin: PH5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14 sensor_pin: PK6
min_temp: 0 min_temp: 0
max_temp: 130 max_temp: 130
control: pid control: pid
@ -109,11 +109,10 @@ pid_ki: 1.822
pid_kd: 741.600 pid_kd: 741.600
[fan] [fan]
pin: ar9 pin: PH6
[mcu] [mcu]
serial: /dev/ttyACM0 serial: /dev/ttyACM0
pin_map: arduino
[printer] [printer]
kinematics: corexy kinematics: corexy
@ -123,8 +122,8 @@ max_z_velocity: 25
max_z_accel: 30 max_z_accel: 30
[bltouch] [bltouch]
sensor_pin: ^ar18 sensor_pin: ^PD3
control_pin: ar7 control_pin: PH4
x_offset: 39 x_offset: 39
y_offset: 11 y_offset: 11
z_offset: 0.9 z_offset: 0.9

59
config/printer-adimlab-2018.cfg
View File

@ -4,50 +4,50 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar25 step_pin: PA3
dir_pin: !ar23 dir_pin: !PA1
enable_pin: !ar27 enable_pin: !PA5
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar22 endstop_pin: ^!PA0
position_min: -5 position_min: -5
position_endstop: -5 position_endstop: -5
position_max: 310 position_max: 310
homing_speed: 30.0 homing_speed: 30.0
[stepper_y] [stepper_y]
step_pin: ar32 step_pin: PC5
dir_pin: !ar33 dir_pin: !PC4
enable_pin: !ar31 enable_pin: !PC6
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar26 endstop_pin: ^!PA4
position_endstop: 0 position_endstop: 0
position_max: 310 position_max: 310
homing_speed: 30.0 homing_speed: 30.0
[stepper_z] [stepper_z]
step_pin: ar35 step_pin: PC2
dir_pin: ar36 dir_pin: PC1
enable_pin: !ar34 enable_pin: !PC3
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^!ar29 endstop_pin: ^!PA7
position_endstop: 0.0 position_endstop: 0.0
position_max: 400 position_max: 400
homing_speed: 5.0 homing_speed: 5.0
[extruder] [extruder]
step_pin: ar42 step_pin: PL7
dir_pin: ar43 dir_pin: PL6
enable_pin: !ar37 enable_pin: !PC0
microsteps: 16 microsteps: 16
rotation_distance: 34.557 rotation_distance: 34.557
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar2 heater_pin: PE4
sensor_type: ATC Semitec 104GT-2 sensor_type: ATC Semitec 104GT-2
sensor_pin: analog8 sensor_pin: PK0
control: pid control: pid
pid_Kp: 15.717 pid_Kp: 15.717
pid_Ki: 0.569 pid_Ki: 0.569
@ -56,9 +56,9 @@ min_temp: 0
max_temp: 245 max_temp: 245
[heater_bed] [heater_bed]
heater_pin: ar4 heater_pin: PG5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog10 sensor_pin: PK2
control: pid control: pid
pid_Kp: 74.883 pid_Kp: 74.883
pid_Ki: 1.809 pid_Ki: 1.809
@ -75,7 +75,6 @@ check_gain_time: 120
[mcu] [mcu]
serial: /dev/ttyUSB0 serial: /dev/ttyUSB0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -85,7 +84,7 @@ max_z_velocity: 10
max_z_accel: 60 max_z_accel: 60
[output_pin stepper_xy_current] [output_pin stepper_xy_current]
pin: ar44 pin: PL5
pwm: True pwm: True
scale: 2.0 scale: 2.0
cycle_time: .000030 cycle_time: .000030
@ -93,7 +92,7 @@ hardware_pwm: True
static_value: 1.3 static_value: 1.3
[output_pin stepper_z_current] [output_pin stepper_z_current]
pin: ar45 pin: PL4
pwm: True pwm: True
scale: 2.0 scale: 2.0
cycle_time: .000030 cycle_time: .000030
@ -101,7 +100,7 @@ hardware_pwm: True
static_value: 1.3 static_value: 1.3
[output_pin stepper_e_current] [output_pin stepper_e_current]
pin: ar46 pin: PL3
pwm: True pwm: True
scale: 2.0 scale: 2.0
cycle_time: .000030 cycle_time: .000030
@ -110,15 +109,15 @@ static_value: 1.25
[display] [display]
lcd_type: st7920 lcd_type: st7920
cs_pin: ar20 cs_pin: PD1
sclk_pin: ar14 sclk_pin: PJ1
sid_pin: ar15 sid_pin: PJ0
encoder_pins: ^ar41, ^ar40 encoder_pins: ^PG0, ^PG1
click_pin: ^!ar19 click_pin: ^!PD2
# The filament runout sensor (on pin ar24) is not currently supported # The filament runout sensor (on pin PA2) is not currently supported
# in Klipper. # in Klipper.
[output_pin case_light] [output_pin case_light]
pin: ar7 pin: PH4
value: 1 value: 1

59
config/printer-anycubic-4max-2018.cfg
View File

@ -4,51 +4,51 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar54 step_pin: PF0
dir_pin: ar55 dir_pin: PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar3 endstop_pin: ^!PE5
position_min: -2 position_min: -2
position_endstop: -2 position_endstop: -2
position_max: 205 position_max: 205
homing_speed: 60.0 homing_speed: 60.0
[stepper_y] [stepper_y]
step_pin: ar60 step_pin: PF6
dir_pin: ar61 dir_pin: PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar14 endstop_pin: ^!PJ1
position_endstop: 0 position_endstop: 0
position_max: 215 position_max: 215
homing_speed: 60.0 homing_speed: 60.0
[stepper_z] [stepper_z]
step_pin: ar46 step_pin: PL3
dir_pin: ar48 dir_pin: PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^!ar18 endstop_pin: ^!PD3
position_endstop: 0.5 position_endstop: 0.5
position_max: 305 position_max: 305
homing_speed: 8.0 homing_speed: 8.0
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: ar28 dir_pin: PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 33.133 rotation_distance: 33.133
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
max_extrude_only_distance: 2000 max_extrude_only_distance: 2000
heater_pin: ar10 heater_pin: PB4
sensor_type: ATC Semitec 104GT-2 sensor_type: ATC Semitec 104GT-2
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_kp: 27.725 pid_kp: 27.725
pid_ki: 1.224 pid_ki: 1.224
@ -57,9 +57,9 @@ min_temp: 0
max_temp: 300 max_temp: 300
[heater_bed] [heater_bed]
heater_pin: ar8 heater_pin: PH5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14 sensor_pin: PK6
control: pid control: pid
pid_kp: 73.735 pid_kp: 73.735
pid_ki: 1.437 pid_ki: 1.437
@ -68,12 +68,11 @@ min_temp: 0
max_temp: 110 max_temp: 110
[fan] [fan]
pin: ar9 pin: PH6
kick_start_time: 1.0 kick_start_time: 1.0
[mcu] [mcu]
serial: /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0 serial: /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -83,23 +82,23 @@ max_z_velocity: 40
max_z_accel: 60 max_z_accel: 60
[heater_fan extruder_fan] [heater_fan extruder_fan]
pin: ar44 pin: PL5
[heater_fan stepstick_fan] [heater_fan stepstick_fan]
pin: ar7 pin: PH4
kick_start_time: 1.0 kick_start_time: 1.0
[display] [display]
lcd_type: st7920 lcd_type: st7920
cs_pin: ar16 cs_pin: PH1
sclk_pin: ar23 sclk_pin: PA1
sid_pin: ar17 sid_pin: PH0
encoder_pins: ^ar31, ^ar33 encoder_pins: ^PC6, ^PC4
click_pin: ^!ar35 click_pin: ^!PC2
kill_pin: ^!ar41 kill_pin: ^!PG0
[filament_switch_sensor e0_sensor] [filament_switch_sensor e0_sensor]
switch_pin: ar19 switch_pin: PD2
[gcode_macro START_PRINT] [gcode_macro START_PRINT]
gcode: gcode:

53
config/printer-anycubic-i3-mega-2017.cfg
View File

@ -7,58 +7,58 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar54 step_pin: PF0
dir_pin: !ar55 dir_pin: !PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar3 endstop_pin: ^!PE5
position_min: -5 position_min: -5
position_endstop: -5 position_endstop: -5
position_max: 210 position_max: 210
homing_speed: 30.0 homing_speed: 30.0
[stepper_y] [stepper_y]
step_pin: ar60 step_pin: PF6
dir_pin: ar61 dir_pin: PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar42 endstop_pin: ^!PL7
position_endstop: 0 position_endstop: 0
position_max: 210 position_max: 210
homing_speed: 30.0 homing_speed: 30.0
[stepper_z] [stepper_z]
step_pin: ar46 step_pin: PL3
dir_pin: ar48 dir_pin: PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^!ar18 endstop_pin: ^!PD3
position_endstop: 0.0 position_endstop: 0.0
position_max: 205 position_max: 205
homing_speed: 5.0 homing_speed: 5.0
[stepper_z1] [stepper_z1]
step_pin: ar36 step_pin: PC1
dir_pin: ar34 dir_pin: PC3
enable_pin: !ar30 enable_pin: !PC7
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^!ar43 endstop_pin: ^!PL6
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: ar28 dir_pin: PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 34.557 rotation_distance: 34.557
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar10 heater_pin: PB4
sensor_type: ATC Semitec 104GT-2 sensor_type: ATC Semitec 104GT-2
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_Kp: 15.717 pid_Kp: 15.717
pid_Ki: 0.569 pid_Ki: 0.569
@ -67,12 +67,12 @@ min_temp: 0
max_temp: 245 max_temp: 245
[heater_fan extruder_fan] [heater_fan extruder_fan]
pin: ar44 pin: PL5
[heater_bed] [heater_bed]
heater_pin: ar8 heater_pin: PH5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14 sensor_pin: PK6
control: pid control: pid
pid_Kp: 74.883 pid_Kp: 74.883
pid_Ki: 1.809 pid_Ki: 1.809
@ -81,11 +81,10 @@ min_temp: 0
max_temp: 110 max_temp: 110
[fan] [fan]
pin: ar9 pin: PH6
[mcu] [mcu]
serial: /dev/ttyUSB0 serial: /dev/ttyUSB0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -95,4 +94,4 @@ max_z_velocity: 10
max_z_accel: 60 max_z_accel: 60
[heater_fan stepstick_fan] [heater_fan stepstick_fan]
pin: ar7 pin: PH4

61
config/printer-anycubic-kossel-2016.cfg
View File

@ -8,12 +8,12 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_a] [stepper_a]
step_pin: ar54 step_pin: PF0
dir_pin: !ar55 dir_pin: !PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar2 endstop_pin: ^PE4
homing_speed: 60 homing_speed: 60
# The next parameter needs to be adjusted for # The next parameter needs to be adjusted for
# your printer. You may want to start with 280 # your printer. You may want to start with 280
@ -23,32 +23,32 @@ position_endstop: 273.0
arm_length: 229.4 arm_length: 229.4
[stepper_b] [stepper_b]
step_pin: ar60 step_pin: PF6
dir_pin: !ar61 dir_pin: !PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar15 endstop_pin: ^PJ0
[stepper_c] [stepper_c]
step_pin: ar46 step_pin: PL3
dir_pin: !ar48 dir_pin: !PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar19 endstop_pin: ^PD2
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: !ar28 dir_pin: !PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 35.165 rotation_distance: 35.165
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar10 heater_pin: PB4
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_Kp: 25.349 pid_Kp: 25.349
pid_Ki: 1.216 pid_Ki: 1.216
@ -58,23 +58,22 @@ min_temp: 0
max_temp: 275 max_temp: 275
#[heater_bed] #[heater_bed]
#heater_pin: ar8 #heater_pin: PH5
#sensor_type: EPCOS 100K B57560G104F #sensor_type: EPCOS 100K B57560G104F
#sensor_pin: analog14 #sensor_pin: PK6
#control: watermark #control: watermark
#min_temp: 0 #min_temp: 0
#max_temp: 130 #max_temp: 130
[fan] [fan]
pin: ar9 pin: PH6
kick_start_time: 0.200 kick_start_time: 0.200
[heater_fan extruder_cooler_fan] [heater_fan extruder_cooler_fan]
pin: ar44 pin: PL5
[mcu] [mcu]
serial: /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0 serial: /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0
pin_map: arduino
[printer] [printer]
kinematics: delta kinematics: delta
@ -102,12 +101,12 @@ timeout: 360
# "RepRapDiscount 2004 Smart Controller" type displays # "RepRapDiscount 2004 Smart Controller" type displays
[display] [display]
lcd_type: hd44780 lcd_type: hd44780
rs_pin: ar16 rs_pin: PH1
e_pin: ar17 e_pin: PH0
d4_pin: ar23 d4_pin: PA1
d5_pin: ar25 d5_pin: PA3
d6_pin: ar27 d6_pin: PA5
d7_pin: ar29 d7_pin: PA7
encoder_pins: ^ar31, ^ar33 encoder_pins: ^PC6, ^PC4
click_pin: ^!ar35 click_pin: ^!PC2
kill_pin: ^!ar41 kill_pin: ^!PG0

63
config/printer-anycubic-kossel-plus-2017.cfg
View File

@ -8,12 +8,12 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_a] [stepper_a]
step_pin: ar54 step_pin: PF0
dir_pin: !ar55 dir_pin: !PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar2 endstop_pin: ^PE4
homing_speed: 60 homing_speed: 60
# The next parameter needs to be adjusted for # The next parameter needs to be adjusted for
# your printer. You may want to start with 280 # your printer. You may want to start with 280
@ -23,32 +23,32 @@ position_endstop: 295.6
arm_length: 269.0 arm_length: 269.0
[stepper_b] [stepper_b]
step_pin: ar60 step_pin: PF6
dir_pin: !ar61 dir_pin: !PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar15 endstop_pin: ^PJ0
[stepper_c] [stepper_c]
step_pin: ar46 step_pin: PL3
dir_pin: !ar48 dir_pin: !PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar19 endstop_pin: ^PD2
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: !ar28 dir_pin: !PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 33.333 rotation_distance: 33.333
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar10 heater_pin: PB4
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_Kp: 25.349 pid_Kp: 25.349
pid_Ki: 1.216 pid_Ki: 1.216
@ -58,9 +58,9 @@ min_temp: 0
max_temp: 275 max_temp: 275
[heater_bed] [heater_bed]
heater_pin: ar8 heater_pin: PH5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14 sensor_pin: PK6
control: pid control: pid
pid_kp: 73.517 pid_kp: 73.517
pid_ki: 1.132 pid_ki: 1.132
@ -69,21 +69,20 @@ min_temp: 0
max_temp: 130 max_temp: 130
[fan] [fan]
pin: ar9 pin: PH6
kick_start_time: 0.200 kick_start_time: 0.200
[heater_fan extruder_cooler_fan] [heater_fan extruder_cooler_fan]
pin: ar44 pin: PL5
# if you want to use your probe for DELTA_CALIBRATE you will need that # if you want to use your probe for DELTA_CALIBRATE you will need that
#[probe] #[probe]
#pin: ^ar18 #pin: ^PD3
#z_offset: 15.9 #z_offset: 15.9
#samples: 3 #samples: 3
[mcu] [mcu]
serial: /dev/ttyUSB0 serial: /dev/ttyUSB0
pin_map: arduino
[printer] [printer]
kinematics: delta kinematics: delta
@ -105,12 +104,12 @@ radius: 115
# "RepRapDiscount 2004 Smart Controller" type displays # "RepRapDiscount 2004 Smart Controller" type displays
[display] [display]
lcd_type: hd44780 lcd_type: hd44780
rs_pin: ar16 rs_pin: PH1
e_pin: ar17 e_pin: PH0
d4_pin: ar23 d4_pin: PA1
d5_pin: ar25 d5_pin: PA3
d6_pin: ar27 d6_pin: PA5
d7_pin: ar29 d7_pin: PA7
encoder_pins: ^ar31, ^ar33 encoder_pins: ^PC6, ^PC4
click_pin: ^!ar35 click_pin: ^!PC2
kill_pin: ^!ar41 kill_pin: ^!PG0

51
config/printer-creality-cr10s-2017.cfg
View File

@ -4,48 +4,48 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar54 step_pin: PF0
dir_pin: ar55 dir_pin: PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar3 endstop_pin: ^PE5
position_endstop: 0 position_endstop: 0
position_max: 300 position_max: 300
homing_speed: 50 homing_speed: 50
[stepper_y] [stepper_y]
step_pin: ar60 step_pin: PF6
dir_pin: ar61 dir_pin: PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar14 endstop_pin: ^PJ1
position_endstop: 0 position_endstop: 0
position_max: 300 position_max: 300
homing_speed: 50 homing_speed: 50
[stepper_z] [stepper_z]
step_pin: ar46 step_pin: PL3
dir_pin: !ar48 dir_pin: !PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^ar18 endstop_pin: ^PD3
position_endstop: 0 position_endstop: 0
position_max: 400 position_max: 400
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: ar28 dir_pin: PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 33.683 rotation_distance: 33.683
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar10 heater_pin: PB4
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_Kp: 22.2 pid_Kp: 22.2
pid_Ki: 1.08 pid_Ki: 1.08
@ -54,9 +54,9 @@ min_temp: 0
max_temp: 250 max_temp: 250
[heater_bed] [heater_bed]
heater_pin: ar8 heater_pin: PH5
sensor_type: ATC Semitec 104GT-2 sensor_type: ATC Semitec 104GT-2
sensor_pin: analog14 sensor_pin: PK6
control: pid control: pid
pid_Kp: 690.34 pid_Kp: 690.34
pid_Ki: 111.47 pid_Ki: 111.47
@ -65,11 +65,10 @@ min_temp: 0
max_temp: 130 max_temp: 130
[fan] [fan]
pin: ar9 pin: PH6
[mcu] [mcu]
serial: /dev/ttyUSB0 serial: /dev/ttyUSB0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -80,8 +79,8 @@ max_z_accel: 100
[display] [display]
lcd_type: st7920 lcd_type: st7920
cs_pin: ar16 cs_pin: PH1
sclk_pin: ar23 sclk_pin: PA1
sid_pin: ar17 sid_pin: PH0
encoder_pins: ^ar33, ^ar31 encoder_pins: ^PC4, ^PC6
click_pin: ^!ar35 click_pin: ^!PC2

47
config/printer-longer-lk4-pro-2019.cfg
View File

@ -5,34 +5,34 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar54 step_pin: PF0
dir_pin: !ar55 dir_pin: !PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar3 endstop_pin: ^!PE5
position_endstop: 0 position_endstop: 0
position_max: 235 position_max: 235
homing_speed: 50 homing_speed: 50
[stepper_y] [stepper_y]
step_pin: ar60 step_pin: PF6
dir_pin: ar61 dir_pin: PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar14 endstop_pin: ^!PJ1
position_endstop: 0 position_endstop: 0
position_max: 235 position_max: 235
homing_speed: 50 homing_speed: 50
[stepper_z] [stepper_z]
step_pin: ar46 step_pin: PL3
dir_pin: !ar48 dir_pin: !PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^!ar35 endstop_pin: ^!PC2
# Uncomment for BLTouch # Uncomment for BLTouch
# endstop_pin: probe:z_virtual_endstop # endstop_pin: probe:z_virtual_endstop
position_endstop: 0.5 position_endstop: 0.5
@ -55,8 +55,8 @@ position_max: 250
# According this follow mapping : # According this follow mapping :
# https://arduiblog.com/2020/06/22/installation-dun-bltouch-sur-lalfawise-u30-pro/ # https://arduiblog.com/2020/06/22/installation-dun-bltouch-sur-lalfawise-u30-pro/
# & see "Branchement" paragraph & picture # & see "Branchement" paragraph & picture
# sensor_pin: ^ar35 # sensor_pin: ^PC2
# control_pin: ar7 # control_pin: PH4
# If you use this fang : https://www.thingiverse.com/thing:3603067 # If you use this fang : https://www.thingiverse.com/thing:3603067
# you can use this follow values for x & y offset # you can use this follow values for x & y offset
# x_offset: -28 # x_offset: -28
@ -70,16 +70,16 @@ position_max: 250
# probe_count: 4,3 # probe_count: 4,3
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: !ar28 dir_pin: !PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 34.5576 rotation_distance: 34.5576
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar10 heater_pin: PB4
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_Kp: 22.2 pid_Kp: 22.2
pid_Ki: 1.08 pid_Ki: 1.08
@ -88,22 +88,21 @@ min_temp: 0
max_temp: 250 max_temp: 250
[filament_switch_sensor filament_sensor] [filament_switch_sensor filament_sensor]
switch_pin: ^!ar2 switch_pin: ^!PE4
[heater_bed] [heater_bed]
heater_pin: ar8 heater_pin: PH5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14 sensor_pin: PK6
control: watermark control: watermark
min_temp: 0 min_temp: 0
max_temp: 130 max_temp: 130
[fan] [fan]
pin: ar9 pin: PH6
[mcu] [mcu]
serial: /dev/ttyUSB0 serial: /dev/ttyUSB0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian

57
config/printer-micromake-d1-2016.cfg
View File

@ -5,43 +5,43 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_a] [stepper_a]
step_pin: ar54 step_pin: PF0
dir_pin: !ar55 dir_pin: !PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 32 rotation_distance: 32
endstop_pin: ^ar2 endstop_pin: ^PE4
homing_speed: 100 homing_speed: 100
position_endstop: 319.5 position_endstop: 319.5
arm_length: 217.0 arm_length: 217.0
[stepper_b] [stepper_b]
step_pin: ar60 step_pin: PF6
dir_pin: !ar61 dir_pin: !PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 32 rotation_distance: 32
endstop_pin: ^ar15 endstop_pin: ^PJ0
[stepper_c] [stepper_c]
step_pin: ar46 step_pin: PL3
dir_pin: !ar48 dir_pin: !PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 32 rotation_distance: 32
endstop_pin: ^ar19 endstop_pin: ^PD2
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: ar28 dir_pin: PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 20.067 rotation_distance: 20.067
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar10 heater_pin: PB4
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_Kp: 22.2 pid_Kp: 22.2
pid_Ki: 1.08 pid_Ki: 1.08
@ -51,11 +51,10 @@ max_temp: 250
max_extrude_only_distance: 100.0 max_extrude_only_distance: 100.0
[fan] [fan]
pin: ar9 pin: PH6
[mcu] [mcu]
serial: /dev/ttyACM0 serial: /dev/ttyACM0
pin_map: arduino
[printer] [printer]
kinematics: delta kinematics: delta
@ -68,16 +67,16 @@ delta_radius: 95
radius: 80 radius: 80
#[probe] #[probe]
#pin: ^!ar18 #pin: ^!PD3
[display] [display]
lcd_type: hd44780 lcd_type: hd44780
rs_pin: ar16 rs_pin: PH1
e_pin: ar17 e_pin: PH0
d4_pin: ar23 d4_pin: PA1
d5_pin: ar25 d5_pin: PA3
d6_pin: ar27 d6_pin: PA5
d7_pin: ar29 d7_pin: PA7
encoder_pins: ^ar31, ^ar33 encoder_pins: ^PC6, ^PC4
click_pin: ^!ar35 click_pin: ^!PC2
kill_pin: ^!ar41 kill_pin: ^!PG0

53
config/printer-sovol-sv01-2020.cfg
View File

@ -5,48 +5,48 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar54 step_pin: PF0
dir_pin: ar55 dir_pin: PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar3 endstop_pin: ^PE5
position_endstop: 0 position_endstop: 0
position_max: 300 position_max: 300
homing_speed: 50 homing_speed: 50
[stepper_y] [stepper_y]
step_pin: ar60 step_pin: PF6
dir_pin: ar61 dir_pin: PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar14 endstop_pin: ^PJ1
position_endstop: 0 position_endstop: 0
position_max: 255 position_max: 255
homing_speed: 50 homing_speed: 50
[stepper_z] [stepper_z]
step_pin: ar46 step_pin: PL3
dir_pin: !ar48 dir_pin: !PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^ar18 endstop_pin: ^PD3
position_endstop: 0 position_endstop: 0
position_max: 300 position_max: 300
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: !ar28 dir_pin: !PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 7.680 rotation_distance: 7.680
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar10 heater_pin: PB4
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_Kp: 31.147 pid_Kp: 31.147
pid_Ki: 2.076 pid_Ki: 2.076
@ -55,9 +55,9 @@ min_temp: 0
max_temp: 265 max_temp: 265
[heater_bed] [heater_bed]
heater_pin: ar8 heater_pin: PH5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14 sensor_pin: PK6
control: pid control: pid
pid_Kp: 72.174 pid_Kp: 72.174
pid_Ki: 1.816 pid_Ki: 1.816
@ -66,15 +66,14 @@ min_temp: 0
max_temp: 110 max_temp: 110
[filament_switch_sensor my_sensor] [filament_switch_sensor my_sensor]
switch_pin: ar2 switch_pin: PE4
pause_on_runout: True pause_on_runout: True
[fan] [fan]
pin: ar9 pin: PH6
[mcu] [mcu]
serial: /dev/ttyUSB0 serial: /dev/ttyUSB0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -85,8 +84,8 @@ max_z_accel: 100
[display] [display]
lcd_type: st7920 lcd_type: st7920
cs_pin: ar16 cs_pin: PH1
sclk_pin: ar23 sclk_pin: PA1
sid_pin: ar17 sid_pin: PH0
encoder_pins: ^ar33, ^ar31 encoder_pins: ^PC4, ^PC6
click_pin: ^!ar35 click_pin: ^!PC2

59
config/printer-sunlu-s8-2020.cfg
View File

@ -1,53 +1,53 @@
# This file contains pin mappings for the SUNLU S8 v1.01 (circa 2020), which # This file contains pin mappings for the SUNLU S8 v1.01 (circa 2020), which
# is a modified RAMPS v1.3 board. To use this config, the firmware should be # is a modified RAMPS v1.3 board. To use this config, the firmware should be
# compiled for the AVR atmega2560. The following pins are available for # compiled for the AVR atmega2560. The following pins are available for
# expansion (e.g. ABL): ^ar19 (Z+ endstop), ar4, ar5, ar6, ar11 # expansion (e.g. ABL): ^PD2 (Z+ endstop), PG5, PE3, PH3, PB5
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar54 step_pin: PF0
dir_pin: !ar55 dir_pin: !PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar3 endstop_pin: ^!PE5
position_endstop: 0 position_endstop: 0
position_max: 310 position_max: 310
homing_speed: 50 homing_speed: 50
[stepper_y] [stepper_y]
step_pin: ar60 step_pin: PF6
dir_pin: !ar61 dir_pin: !PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar14 endstop_pin: ^!PJ1
position_endstop: 0 position_endstop: 0
position_max: 310 position_max: 310
homing_speed: 50 homing_speed: 50
[stepper_z] [stepper_z]
step_pin: ar46 step_pin: PL3
dir_pin: ar48 dir_pin: PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^!ar18 endstop_pin: ^!PD3
position_endstop: 0.5 position_endstop: 0.5
position_max: 400 position_max: 400
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: !ar28 dir_pin: !PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 33.280 rotation_distance: 33.280
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar10 heater_pin: PB4
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_kp: 25.588 pid_kp: 25.588
pid_ki: 1.496 pid_ki: 1.496
@ -57,12 +57,12 @@ max_temp: 250
[filament_switch_sensor runout] [filament_switch_sensor runout]
pause_on_runout: True pause_on_runout: True
switch_pin: ^ar2 switch_pin: ^PE4
[heater_bed] [heater_bed]
heater_pin: ar8 heater_pin: PH5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14 sensor_pin: PK6
control: pid control: pid
pid_kp: 74.786 pid_kp: 74.786
pid_ki: 0.766 pid_ki: 0.766
@ -77,14 +77,13 @@ max_temp: 110
check_gain_time: 240 check_gain_time: 240
[fan] [fan]
pin: ar9 pin: PH6
[heater_fan fan1] [heater_fan fan1]
pin: ar7 pin: PH4
[mcu] [mcu]
serial: /dev/ttyUSB0 serial: /dev/ttyUSB0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -95,11 +94,11 @@ max_z_accel: 100
[display] [display]
lcd_type: st7920 lcd_type: st7920
cs_pin: ar16 cs_pin: PH1
sclk_pin: ar23 sclk_pin: PA1
sid_pin: ar17 sid_pin: PH0
encoder_pins: ^ar33, ^ar31 encoder_pins: ^PC4, ^PC6
click_pin: ^!ar35 click_pin: ^!PC2
[output_pin beeper] [output_pin beeper]
pin: ar37 pin: PC0

61
config/printer-tevo-flash-2018.cfg
View File

@ -8,33 +8,33 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar54 step_pin: PF0
dir_pin: !ar55 dir_pin: !PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: !ar3 endstop_pin: !PE5
position_endstop: -13 position_endstop: -13
position_min: -13 position_min: -13
position_max: 235 position_max: 235
homing_speed: 50 homing_speed: 50
[stepper_y] [stepper_y]
step_pin: ar60 step_pin: PF6
dir_pin: ar61 dir_pin: PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: !ar14 endstop_pin: !PJ1
position_endstop: -3 position_endstop: -3
position_min: -3 position_min: -3
position_max: 235 position_max: 235
homing_speed: 50 homing_speed: 50
[stepper_z] [stepper_z]
step_pin: ar46 step_pin: PL3
dir_pin: ar48 dir_pin: PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
position_max: 250 position_max: 250
@ -42,24 +42,24 @@ endstop_pin: probe:z_virtual_endstop
position_min: -2 position_min: -2
[stepper_z1] [stepper_z1]
step_pin: ar36 step_pin: PC1
dir_pin: ar34 dir_pin: PC3
enable_pin: !ar30 enable_pin: !PC7
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: ar28 dir_pin: PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
gear_ratio: 50:17 gear_ratio: 50:17
rotation_distance: 22.598 rotation_distance: 22.598
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar10 heater_pin: PB4
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_Kp: 18.547 pid_Kp: 18.547
pid_Ki: 0.788 pid_Ki: 0.788
@ -68,9 +68,9 @@ min_temp: 0
max_temp: 250 max_temp: 250
[heater_bed] [heater_bed]
heater_pin: ar8 heater_pin: PH5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14 sensor_pin: PK6
control: pid control: pid
pid_Kp: 38.824 pid_Kp: 38.824
pid_Ki: 0.539 pid_Ki: 0.539
@ -79,14 +79,13 @@ min_temp: 0
max_temp: 70 max_temp: 70
[heater_fan my_nozzle_fan] [heater_fan my_nozzle_fan]
pin: ar7 pin: PH4
[fan] [fan]
pin: ar9 pin: PH6
[mcu] [mcu]
serial: /dev/ttyUSB0 serial: /dev/ttyUSB0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -97,15 +96,15 @@ max_z_accel: 100
[display] [display]
lcd_type: uc1701 lcd_type: uc1701
cs_pin: ar25 cs_pin: PA3
a0_pin: ar27 a0_pin: PA5
encoder_pins: ^!ar31, ^!ar33 encoder_pins: ^!PC6, ^!PC4
click_pin: ^!ar35 click_pin: ^!PC2
kill_pin: ar64 kill_pin: PK2
[bltouch] [bltouch]
sensor_pin: ar18 sensor_pin: PD3
control_pin: ar11 control_pin: PB5
x_offset: 0 x_offset: 0
y_offset: 18 y_offset: 18
z_offset: 1.64 z_offset: 1.64

59
config/printer-tevo-tarantula-pro-2020.cfg
View File

@ -8,58 +8,58 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar54 step_pin: PF0
dir_pin: !ar55 dir_pin: !PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar3 endstop_pin: ^!PE5
position_endstop: -2 position_endstop: -2
position_max: 220 position_max: 220
position_min: -2 position_min: -2
homing_speed: 25.0 homing_speed: 25.0
[stepper_y] [stepper_y]
step_pin: ar60 step_pin: PF6
dir_pin: ar61 dir_pin: PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar14 endstop_pin: ^!PJ1
position_endstop: 0 position_endstop: 0
position_max: 220 position_max: 220
homing_speed: 25.0 homing_speed: 25.0
[stepper_z] [stepper_z]
step_pin: ar46 step_pin: PL3
dir_pin: ar48 dir_pin: PL1
enable_pin: !ar62 enable_pin: !PK0
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^!ar18 endstop_pin: ^!PD3
position_endstop: 0 position_endstop: 0
position_max: 200 position_max: 200
# Enable for dual-z addon # Enable for dual-z addon
#[stepper_z1] #[stepper_z1]
#step_pin: ar36 #step_pin: PC1
#dir_pin: ar34 #dir_pin: PC3
#enable_pin: !ar30 #enable_pin: !PC7
#microsteps: 16 #microsteps: 16
#rotation_distance: 8 #rotation_distance: 8
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
dir_pin: ar28 dir_pin: PA6
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 7.904 rotation_distance: 7.904
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.75 filament_diameter: 1.75
heater_pin: ar10 heater_pin: PB4
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_Kp: 22.5 pid_Kp: 22.5
pid_Ki: 1.78 pid_Ki: 1.78
@ -68,19 +68,18 @@ min_temp: 0
max_temp: 220 max_temp: 220
[heater_bed] [heater_bed]
heater_pin: ar8 heater_pin: PH5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14 sensor_pin: PK6
control: watermark control: watermark
min_temp: 0 min_temp: 0
max_temp: 110 max_temp: 110
[fan] [fan]
pin: ar9 pin: PH6
[mcu] [mcu]
serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0 serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -90,13 +89,13 @@ max_z_velocity: 50
max_z_accel: 100 max_z_accel: 100
[heater_fan nozzle_fan] [heater_fan nozzle_fan]
pin: ar7 pin: PH4
[display] [display]
lcd_type: uc1701 lcd_type: uc1701
cs_pin: ar25 cs_pin: PA3
a0_pin: ar27 a0_pin: PA5
encoder_pins: ^!ar31, ^!ar33 encoder_pins: ^!PC6, ^!PC4
click_pin: ^!ar35 click_pin: ^!PC2
kill_pin: !ar41 kill_pin: !PG0
menu_reverse_navigation: true menu_reverse_navigation: true

57
config/printer-velleman-k8200-2013.cfg
View File

@ -7,52 +7,52 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar54 step_pin: PF0
dir_pin: !ar55 dir_pin: !PF1
enable_pin: !ar38 enable_pin: !PD7
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar3 endstop_pin: ^PE5
position_endstop: 0 position_endstop: 0
position_max: 200 position_max: 200
homing_speed: 50 homing_speed: 50
[stepper_y] [stepper_y]
step_pin: ar60 step_pin: PF6
dir_pin: !ar61 dir_pin: !PF7
enable_pin: !ar56 enable_pin: !PF2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^ar14 endstop_pin: ^PJ1
position_endstop: 0 position_endstop: 0
position_max: 200 position_max: 200
homing_speed: 50 homing_speed: 50
[stepper_z] [stepper_z]
step_pin: ar46 step_pin: PL3
dir_pin: !ar48 dir_pin: !PL1
enable_pin: !ar63 enable_pin: !PK1
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^ar18 endstop_pin: ^PD3
position_endstop: 0.5 position_endstop: 0.5
# Set position_max to 200 if you have the original Z-axis setup. # Set position_max to 200 if you have the original Z-axis setup.
position_max: 250 position_max: 250
[extruder] [extruder]
step_pin: ar26 step_pin: PA4
# Remove the "!" from dir_pin if you have an original extruder # Remove the "!" from dir_pin if you have an original extruder
dir_pin: !ar28 dir_pin: !PA6
enable_pin: !ar24 enable_pin: !PA2
# You will have to calculate your own rotation_distance. # You will have to calculate your own rotation_distance.
# This is for the belted extruder https://www.thingiverse.com/thing:339928 # This is for the belted extruder https://www.thingiverse.com/thing:339928
microsteps: 16 microsteps: 16
rotation_distance: 4.266 rotation_distance: 4.266
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 2.85 filament_diameter: 2.85
heater_pin: ar10 heater_pin: PB4
sensor_type: ATC Semitec 104GT-2 sensor_type: ATC Semitec 104GT-2
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_Kp: 21.503 pid_Kp: 21.503
pid_Ki: 1.103 pid_Ki: 1.103
@ -61,9 +61,9 @@ min_temp: 0
max_temp: 250 max_temp: 250
[heater_bed] [heater_bed]
heater_pin: ar9 heater_pin: PH6
sensor_type: ATC Semitec 104GT-2 sensor_type: ATC Semitec 104GT-2
sensor_pin: analog14 sensor_pin: PK6
control: pid control: pid
pid_Kp: 75.283 pid_Kp: 75.283
pid_Ki: 0.588 pid_Ki: 0.588
@ -72,12 +72,11 @@ min_temp: 0
max_temp: 130 max_temp: 130
[fan] [fan]
pin: ar8 pin: PH5
kick_start_time: 0.500 kick_start_time: 0.500
[mcu] [mcu]
serial: /dev/ttyUSB0 serial: /dev/ttyUSB0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -89,11 +88,11 @@ max_z_accel: 100
# The LCD is untested - "RepRapDiscount 2004 Smart Controller" displays # The LCD is untested - "RepRapDiscount 2004 Smart Controller" displays
#[display] #[display]
#lcd_type: hd44780 #lcd_type: hd44780
#rs_pin: ar27 #rs_pin: PA5
#e_pin: ar29 #e_pin: PA7
#d4_pin: ar37 #d4_pin: PC0
#d5_pin: ar35 #d5_pin: PC2
#d6_pin: ar33 #d6_pin: PC4
#d7_pin: ar31 #d7_pin: PC6
#encoder_pins: ^ar16, ^ar17 #encoder_pins: ^PH1, ^PH0
#click_pin: ^!ar23 #click_pin: ^!PA1

41
config/printer-wanhao-duplicator-9-2018.cfg
View File

@ -5,31 +5,31 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar61 step_pin: PF7
dir_pin: !ar62 dir_pin: !PK0
enable_pin: !ar60 enable_pin: !PF6
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar54 endstop_pin: ^!PF0
position_endstop: 0 position_endstop: 0
position_max: 295 position_max: 295
homing_speed: 30.0 homing_speed: 30.0
[stepper_y] [stepper_y]
step_pin: ar64 step_pin: PK2
dir_pin: ar65 dir_pin: PK3
enable_pin: !ar2 enable_pin: !PE4
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar24 endstop_pin: ^!PA2
position_endstop: 0 position_endstop: 0
position_max: 290 position_max: 290
homing_speed: 30.0 homing_speed: 30.0
[stepper_z] [stepper_z]
step_pin: ar67 step_pin: PK5
dir_pin: ar69 dir_pin: PK7
enable_pin: !ar66 enable_pin: !PK4
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: probe:z_virtual_endstop endstop_pin: probe:z_virtual_endstop
@ -37,16 +37,16 @@ position_max: 370
position_min: -0.99 position_min: -0.99
[extruder] [extruder]
step_pin: ar58 step_pin: PF4
dir_pin: ar59 dir_pin: PF5
enable_pin: !ar57 enable_pin: !PF3
microsteps: 16 microsteps: 16
rotation_distance: 31.936 rotation_distance: 31.936
nozzle_diameter: 0.4 nozzle_diameter: 0.4
filament_diameter: 1.75 filament_diameter: 1.75
heater_pin: ar4 heater_pin: PG5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog1 sensor_pin: PF1
control: pid control: pid
pid_Kp: 33.41 pid_Kp: 33.41
pid_Ki: 1.47 pid_Ki: 1.47
@ -55,9 +55,9 @@ min_temp: 0
max_temp: 315 max_temp: 315
[heater_bed] [heater_bed]
heater_pin: ar3 heater_pin: PE5
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14 sensor_pin: PK6
control: pid control: pid
pid_Kp: 64.095903 pid_Kp: 64.095903
pid_Ki: 1.649830 pid_Ki: 1.649830
@ -66,10 +66,10 @@ min_temp: 0
max_temp: 120 max_temp: 120
[fan] [fan]
pin: ar5 pin: PE3
[probe] [probe]
pin: !ar6 pin: !PH3
x_offset: 27 x_offset: 27
y_offset: 3 y_offset: 3
z_offset: 1.4 z_offset: 1.4
@ -80,7 +80,6 @@ samples_result: average
[mcu] [mcu]
serial: /dev/ttyUSB0 serial: /dev/ttyUSB0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian

49
config/printer-wanhao-duplicator-i3-mini-2017.cfg
View File

@ -7,48 +7,48 @@
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
step_pin: ar22 step_pin: PA0
dir_pin: !ar23 dir_pin: !PA1
enable_pin: !ar57 enable_pin: !PF3
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar19 endstop_pin: ^!PD2
position_endstop: 120 position_endstop: 120
position_max: 120 position_max: 120
homing_speed: 30.0 homing_speed: 30.0
[stepper_y] [stepper_y]
step_pin: ar25 step_pin: PA3
dir_pin: ar26 dir_pin: PA4
enable_pin: !ar24 enable_pin: !PA2
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^!ar18 endstop_pin: ^!PD3
position_endstop: 0 position_endstop: 0
position_max: 135 position_max: 135
homing_speed: 30.0 homing_speed: 30.0
[stepper_z] [stepper_z]
step_pin: ar29 step_pin: PA7
dir_pin: ar39 dir_pin: PG2
enable_pin: !ar28 enable_pin: !PA6
microsteps: 16 microsteps: 16
rotation_distance: 8 rotation_distance: 8
endstop_pin: ^!ar38 endstop_pin: ^!PD7
position_endstop: 0.5 position_endstop: 0.5
position_max: 100 position_max: 100
[extruder] [extruder]
step_pin: ar55 step_pin: PF1
dir_pin: !ar56 dir_pin: !PF2
enable_pin: !ar54 enable_pin: !PF0
microsteps: 16 microsteps: 16
rotation_distance: 34.043 rotation_distance: 34.043
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: ar4 heater_pin: PG5
sensor_type: NTC 100K MGB18-104F39050L32 sensor_type: NTC 100K MGB18-104F39050L32
sensor_pin: analog13 sensor_pin: PK5
control: pid control: pid
pid_Kp: 22.2 pid_Kp: 22.2
pid_Ki: 1.08 pid_Ki: 1.08
@ -57,11 +57,10 @@ min_temp: 1
max_temp: 265 max_temp: 265
[fan] [fan]
pin: ar12 pin: PB6
[mcu] [mcu]
serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0 serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
pin_map: arduino
[printer] [printer]
kinematics: cartesian kinematics: cartesian
@ -72,9 +71,9 @@ max_z_accel: 100
[display] [display]
lcd_type: uc1701 lcd_type: uc1701
cs_pin: ar41 cs_pin: PG0
a0_pin: ar40 a0_pin: PG1
rst_pin: ar27 rst_pin: PA5
click_pin: ^!ar5 click_pin: ^!PE3
encoder_pins: ^ar3, ^ar2 encoder_pins: ^PE5, ^PE4
kill_pin: ar64 kill_pin: PK2