From 7a443e50e1dbf42eeef02b2983cb15f33722d45c Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Fri, 19 Mar 2021 12:52:21 -0400 Subject: [PATCH] config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor --- config/generic-gt2560.cfg | 57 ++++++----- config/generic-ramps.cfg | 69 +++++++------- config/generic-rumba.cfg | 95 +++++++++---------- config/generic-ultimaker-ultimainboard-v2.cfg | 59 ++++++------ config/kit-voron2-250mm.cfg | 80 ++++++++-------- config/kit-zav3d-2019.cfg | 51 +++++----- config/printer-adimlab-2018.cfg | 59 ++++++------ config/printer-anycubic-4max-2018.cfg | 59 ++++++------ config/printer-anycubic-i3-mega-2017.cfg | 53 +++++------ config/printer-anycubic-kossel-2016.cfg | 61 ++++++------ config/printer-anycubic-kossel-plus-2017.cfg | 63 ++++++------ config/printer-creality-cr10s-2017.cfg | 51 +++++----- config/printer-longer-lk4-pro-2019.cfg | 47 +++++---- config/printer-micromake-d1-2016.cfg | 57 ++++++----- config/printer-sovol-sv01-2020.cfg | 53 +++++------ config/printer-sunlu-s8-2020.cfg | 59 ++++++------ config/printer-tevo-flash-2018.cfg | 61 ++++++------ config/printer-tevo-tarantula-pro-2020.cfg | 59 ++++++------ config/printer-velleman-k8200-2013.cfg | 57 ++++++----- config/printer-wanhao-duplicator-9-2018.cfg | 41 ++++---- ...printer-wanhao-duplicator-i3-mini-2017.cfg | 49 +++++----- 21 files changed, 609 insertions(+), 631 deletions(-) diff --git a/config/generic-gt2560.cfg b/config/generic-gt2560.cfg index e8cd97e0..444d4bac 100644 --- a/config/generic-gt2560.cfg +++ b/config/generic-gt2560.cfg @@ -5,49 +5,49 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar25 -dir_pin: ar23 -enable_pin: !ar27 +step_pin: PA3 +dir_pin: PA1 +enable_pin: !PA5 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar22 +endstop_pin: ^PA0 position_endstop: 0 position_max: 200 homing_speed: 30 [stepper_y] -step_pin: ar31 -dir_pin: ar33 -enable_pin: !ar29 +step_pin: PC6 +dir_pin: PC4 +enable_pin: !PA7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar26 +endstop_pin: ^PA4 position_endstop: 0 position_max: 200 homing_speed: 30 [stepper_z] -step_pin: ar37 -dir_pin: !ar39 -enable_pin: !ar35 +step_pin: PC0 +dir_pin: !PG2 +enable_pin: !PC2 microsteps: 16 rotation_distance: 8 -endstop_pin: ^ar30 +endstop_pin: ^PC7 position_endstop: 0 position_max: 200 position_min: 0.0 [extruder] -step_pin: ar43 -dir_pin: ar45 -enable_pin: !ar41 +step_pin: PL6 +dir_pin: PL4 +enable_pin: !PG0 microsteps: 16 rotation_distance: 33.500 nozzle_diameter: 0.4 filament_diameter: 1.750 -heater_pin: ar2 +heater_pin: PE4 sensor_type: ATC Semitec 104GT-2 -sensor_pin: analog8 +sensor_pin: PK0 min_temp: 0 max_temp: 250 control: pid @@ -56,9 +56,9 @@ pid_ki: 1.774 pid_kd: 125.159 [heater_bed] -heater_pin: ar4 +heater_pin: PG5 sensor_type: ATC Semitec 104GT-2 -sensor_pin: analog10 +sensor_pin: PK2 min_temp: 0 max_temp: 120 control: pid @@ -67,11 +67,10 @@ pid_ki: 2.898 pid_kd: 342.787 [fan] -pin: ar7 +pin: PH4 [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: cartesian @@ -82,11 +81,11 @@ max_z_accel: 500 [display] lcd_type: hd44780 -rs_pin: ar20 -e_pin: ar17 -d4_pin: ar16 -d5_pin: ar21 -d6_pin: ar5 -d7_pin: ar6 -encoder_pins: ^ar42, ^ar40 -click_pin: ^!ar19 +rs_pin: PD1 +e_pin: PH0 +d4_pin: PH1 +d5_pin: PD0 +d6_pin: PE3 +d7_pin: PH3 +encoder_pins: ^PL7, ^PG1 +click_pin: ^!PD2 diff --git a/config/generic-ramps.cfg b/config/generic-ramps.cfg index 19e4653d..f2c5bc33 100644 --- a/config/generic-ramps.cfg +++ b/config/generic-ramps.cfg @@ -1,55 +1,55 @@ # This file contains common pin mappings for RAMPS (v1.3 and later) # boards. RAMPS boards typically use a firmware compiled for the AVR -# atmega2560 (though other AVR chips are also possible). +# atmega2560 (though the atmega1280 is also possible). # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar54 -dir_pin: ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar3 -#endstop_pin: ^ar2 +endstop_pin: ^PE5 +#endstop_pin: ^PE4 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_y] -step_pin: ar60 -dir_pin: !ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: !PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar14 -#endstop_pin: ^ar15 +endstop_pin: ^PJ1 +#endstop_pin: ^PJ0 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_z] -step_pin: ar46 -dir_pin: ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 -endstop_pin: ^ar18 -#endstop_pin: ^ar19 +endstop_pin: ^PD3 +#endstop_pin: ^PD2 position_endstop: 0.5 position_max: 200 [extruder] -step_pin: ar26 -dir_pin: ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 33.500 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 22.2 pid_Ki: 1.08 @@ -58,27 +58,26 @@ min_temp: 0 max_temp: 250 #[extruder1] -#step_pin: ar36 -#dir_pin: ar34 -#enable_pin: !ar30 -#heater_pin: ar9 -#sensor_pin: analog15 +#step_pin: PC1 +#dir_pin: PC3 +#enable_pin: !PC7 +#heater_pin: PH6 +#sensor_pin: PK7 #... [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: watermark min_temp: 0 max_temp: 130 [fan] -pin: ar9 +pin: PH6 [mcu] serial: /dev/ttyACM0 -pin_map: arduino [printer] kinematics: cartesian @@ -91,12 +90,12 @@ max_z_accel: 100 [board_pins] aliases: # Common EXP1 header found on many "all-in-one" ramps clones - EXP1_1=ar37, EXP1_3=ar17, EXP1_5=ar23, EXP1_7=ar27, EXP1_9=, - EXP1_2=ar35, EXP1_4=ar16, EXP1_6=ar25, EXP1_8=ar29, EXP1_10=<5V>, + EXP1_1=PC0, EXP1_3=PH0, EXP1_5=PA1, EXP1_7=PA5, EXP1_9=, + EXP1_2=PC2, EXP1_4=PH1, EXP1_6=PA3, EXP1_8=PA7, EXP1_10=<5V>, # EXP2 header - EXP2_1=ar50, EXP2_3=ar31, EXP2_5=ar33, EXP2_7=ar49, EXP2_9=, - EXP2_2=ar52, EXP2_4=ar53, EXP2_6=ar51, EXP2_8=ar41, EXP2_10= + EXP2_1=PB3, EXP2_3=PC6, EXP2_5=PC4, EXP2_7=PL0, EXP2_9=, + EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PG0, EXP2_10= # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi" - # Note, some boards wire: EXP2_8=, EXP2_10=ar41 + # Note, some boards wire: EXP2_8=, EXP2_10=PG0 # See the sample-lcd.cfg file for definitions of common LCD displays. diff --git a/config/generic-rumba.cfg b/config/generic-rumba.cfg index abfa7a0a..efc7398a 100644 --- a/config/generic-rumba.cfg +++ b/config/generic-rumba.cfg @@ -4,51 +4,51 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar17 -dir_pin: ar16 -enable_pin: !ar48 +step_pin: PH0 +dir_pin: PH1 +enable_pin: !PL1 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar37 -#endstop_pin: ^ar36 +endstop_pin: ^PC0 +#endstop_pin: ^PC1 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_y] -step_pin: ar54 -dir_pin: !ar47 -enable_pin: !ar55 +step_pin: PF0 +dir_pin: !PL2 +enable_pin: !PF1 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar35 -#endstop_pin: ^ar34 +endstop_pin: ^PC2 +#endstop_pin: ^PC3 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_z] -step_pin: ar57 -dir_pin: ar56 -enable_pin: !ar62 +step_pin: PF3 +dir_pin: PF2 +enable_pin: !PK0 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar33 -#endstop_pin: ^ar32 +endstop_pin: ^PC4 +#endstop_pin: ^PC5 position_endstop: 0.5 position_max: 200 [extruder] -step_pin: ar23 -dir_pin: ar22 -enable_pin: !ar24 +step_pin: PA1 +dir_pin: PA0 +enable_pin: !PA2 microsteps: 16 rotation_distance: 33.500 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar2 +heater_pin: PE4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog15 +sensor_pin: PK7 control: pid pid_Kp: 22.2 pid_Ki: 1.08 @@ -57,38 +57,37 @@ min_temp: 0 max_temp: 250 #[extruder1] -#step_pin: ar26 -#dir_pin: ar25 -#enable_pin: !ar27 -#heater_pin: ar3 -#sensor_pin: analog14 +#step_pin: PA4 +#dir_pin: PA3 +#enable_pin: !PA5 +#heater_pin: PE5 +#sensor_pin: PK6 #... #[extruder2] -#step_pin: ar29 -#dir_pin: ar28 -#enable_pin: !ar39 -#heater_pin: ar6 -#sensor_pin: analog13 +#step_pin: PA7 +#dir_pin: PA6 +#enable_pin: !PG2 +#heater_pin: PH3 +#sensor_pin: PK5 #... [heater_bed] -heater_pin: ar9 +heater_pin: PH6 sensor_type: NTC 100K beta 3950 -sensor_pin: analog11 +sensor_pin: PK3 control: watermark min_temp: 0 max_temp: 130 [fan] -pin: ar7 +pin: PH4 #[heater_fan fan1] -#pin: ar8 +#pin: PH5 [mcu] serial: /dev/ttyACM0 -pin_map: arduino [printer] kinematics: cartesian @@ -100,20 +99,20 @@ max_z_accel: 100 # "RepRapDiscount 2004 Smart Controller" type displays #[display] #lcd_type: hd44780 -#rs_pin: ar19 -#e_pin: ar42 -#d4_pin: ar18 -#d5_pin: ar38 -#d6_pin: ar41 -#d7_pin: ar40 -#encoder_pins: ^ar11, ^ar12 -#click_pin: ^!ar43 +#rs_pin: PD2 +#e_pin: PL7 +#d4_pin: PD3 +#d5_pin: PD7 +#d6_pin: PG0 +#d7_pin: PG1 +#encoder_pins: ^PB5, ^PB6 +#click_pin: ^!PL6 # "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays #[display] #lcd_type: st7920 -#cs_pin: ar19 -#sclk_pin: ar18 -#sid_pin: ar42 -#encoder_pins: ^ar11, ^ar12 -#click_pin: ^!ar43 +#cs_pin: PD2 +#sclk_pin: PD3 +#sid_pin: PL7 +#encoder_pins: ^PB5, ^PB6 +#click_pin: ^!PL6 diff --git a/config/generic-ultimaker-ultimainboard-v2.cfg b/config/generic-ultimaker-ultimainboard-v2.cfg index f79ea6ea..c3e58210 100644 --- a/config/generic-ultimaker-ultimainboard-v2.cfg +++ b/config/generic-ultimaker-ultimainboard-v2.cfg @@ -5,49 +5,49 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar25 -dir_pin: !ar23 -enable_pin: !ar27 +step_pin: PA3 +dir_pin: !PA1 +enable_pin: !PA5 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar22 +endstop_pin: ^!PA0 position_endstop: 0 position_max: 230 homing_speed: 50.0 [stepper_y] -step_pin: ar32 -dir_pin: ar33 -enable_pin: !ar31 +step_pin: PC5 +dir_pin: PC4 +enable_pin: !PC6 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar26 +endstop_pin: ^!PA4 position_endstop: 225 position_max: 225 homing_speed: 50.0 [stepper_z] -step_pin: ar35 -dir_pin: !ar36 -enable_pin: !ar34 +step_pin: PC2 +dir_pin: !PC1 +enable_pin: !PC3 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar29 +endstop_pin: ^!PA7 position_endstop: 215 position_max: 215 homing_speed: 20.0 [extruder] -step_pin: ar42 -dir_pin: ar43 -enable_pin: !ar37 +step_pin: PL7 +dir_pin: PL6 +enable_pin: !PC0 microsteps: 16 rotation_distance: 33.500 nozzle_diameter: 0.400 filament_diameter: 2.850 -heater_pin: ar2 +heater_pin: PE4 sensor_type: PT100 INA826 -sensor_pin: analog8 +sensor_pin: PK0 control: pid pid_Kp: 22.2 pid_Ki: 1.08 @@ -57,16 +57,16 @@ max_temp: 275 # Dual extruder support. #[extruder1] -#step_pin: ar49 -#dir_pin: ar47 -#enable_pin: !ar48 +#step_pin: PL0 +#dir_pin: PL2 +#enable_pin: !PL1 #microsteps: 16 #rotation_distance: 33.500 #nozzle_diameter: 0.400 #filament_diameter: 2.850 -#heater_pin: ar3 +#heater_pin: PE5 #sensor_type: PT100 INA826 -#sensor_pin: analog9 +#sensor_pin: PK1 #control: pid #pid_Kp: 22.2 #pid_Ki: 1.08 @@ -75,19 +75,18 @@ max_temp: 275 #max_temp: 275 [heater_bed] -heater_pin: ar4 +heater_pin: PG5 sensor_type: PT100 INA826 -sensor_pin: analog10 +sensor_pin: PK2 control: watermark min_temp: 0 max_temp: 100 [fan] -pin: ar7 +pin: PH4 [mcu] serial: /dev/ttyACM0 -pin_map: arduino [printer] kinematics: cartesian @@ -97,12 +96,12 @@ max_z_velocity: 25 max_z_accel: 30 [output_pin case_light] -pin: ar8 +pin: PH5 static_value: 1.0 # Motor current settings. [output_pin stepper_xy_current] -pin: ar44 +pin: PL5 pwm: True scale: 1.5 # Max power setting. @@ -112,7 +111,7 @@ static_value: 1.200 # Power adjustment setting. [output_pin stepper_z_current] -pin: ar45 +pin: PL4 pwm: True scale: 1.5 cycle_time: .000030 @@ -120,7 +119,7 @@ hardware_pwm: True static_value: 1.200 [output_pin stepper_e_current] -pin: ar46 +pin: PL3 pwm: True scale: 1.5 cycle_time: .000030 diff --git a/config/kit-voron2-250mm.cfg b/config/kit-voron2-250mm.cfg index faee7dfc..dcad007a 100644 --- a/config/kit-voron2-250mm.cfg +++ b/config/kit-voron2-250mm.cfg @@ -30,14 +30,12 @@ # Mcu for X/Y/E steppers serial: /dev/serial/by-id/**INSERT_YOUR_ARDUINO_DEFINITION_HERE** # Obtain definition by "ls -l /dev/serial/by-id/" -pin_map: arduino restart_method: arduino [mcu z] # Mcu for Z steppers serial: /dev/serial/by-id/**INSERT_YOUR_ARDUINO_DEFINITION_HERE** # Obtain definition by "ls -l /dev/serial/by-id/" -pin_map: arduino restart_method: arduino [printer] @@ -49,14 +47,14 @@ max_z_accel: 350 [stepper_x] # B Stepper -step_pin: ar54 -dir_pin: !ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: !PF1 +enable_pin: !PD7 # X on mcu_xye microsteps: 16 rotation_distance: 40 # 80 steps per mm - 1.8 deg - 1/16 microstepping -endstop_pin: ^ar2 +endstop_pin: ^PE4 # X_MAX on mcu_xye position_min: 0 position_endstop: 250 @@ -66,14 +64,14 @@ homing_retract_dist: 5 [stepper_y] # A Stepper -step_pin: ar60 -dir_pin: !ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: !PF7 +enable_pin: !PF2 # Y on mcu_xye microsteps: 16 rotation_distance: 40 # 80 steps per mm - 1.8 deg - 1/16 microstepping -endstop_pin: ^ar15 +endstop_pin: ^PJ0 # Y_MAX on mcu_xye position_min: 0 position_endstop: 250 @@ -83,14 +81,14 @@ homing_retract_dist: 5 [stepper_z] # Z0 Stepper - Front Left -step_pin: z:ar54 -dir_pin: !z:ar55 -enable_pin: !z:ar38 +step_pin: z:PF0 +dir_pin: !z:PF1 +enable_pin: !z:PD7 # X on mcu_z microsteps: 16 rotation_distance: 8 # 400 steps per mm - 1.8 deg - 1/16 microstepping -endstop_pin: ^!z:ar18 +endstop_pin: ^!z:PD3 # Z_MIN on mcu_z position_endstop: -0.2 # Offset (in mm) for nozzle to bed off z switch @@ -103,9 +101,9 @@ homing_retract_dist: 3.0 [stepper_z1] # Z1 Stepper - Rear Left -step_pin: z:ar60 -dir_pin: z:ar61 -enable_pin: !z:ar56 +step_pin: z:PF6 +dir_pin: z:PF7 +enable_pin: !z:PF2 # Y on mcu_z microsteps: 16 rotation_distance: 8 @@ -113,9 +111,9 @@ rotation_distance: 8 [stepper_z2] # Z2 Stepper - Rear Right -step_pin: z:ar46 -dir_pin: !z:ar48 -enable_pin: !z:ar62 +step_pin: z:PL3 +dir_pin: !z:PL1 +enable_pin: !z:PK0 # Z on mcu_z microsteps: 16 rotation_distance: 8 @@ -123,18 +121,18 @@ rotation_distance: 8 [stepper_z3] # Z3 Stepper - Front Right -step_pin: z:ar26 -dir_pin: z:ar28 -enable_pin: !z:ar24 +step_pin: z:PA4 +dir_pin: z:PA6 +enable_pin: !z:PA2 # E0 on mcu_z microsteps: 16 rotation_distance: 8 # 400 steps per mm - 1.8 deg - 1/16 microstepping [extruder] -step_pin: ar26 -dir_pin: ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: PA6 +enable_pin: !PA2 # E0 on mcu_xye microsteps: 16 rotation_distance: 5.76576 @@ -143,11 +141,11 @@ nozzle_diameter: 0.400 filament_diameter: 1.750 max_extrude_only_distance: 780.0 # This is set high to allow the load/unload filament macros to run -heater_pin: ar10 +heater_pin: PB4 # D10 on mcu_xye max_power: 1.0 sensor_type: NTC 100K beta 3950 -sensor_pin: analog13 +sensor_pin: PK5 # T0 on mcu_xye smooth_time: 3.0 control: pid @@ -160,7 +158,7 @@ max_temp: 270 [probe] # Inductive Probe -pin: ^z:ar19 +pin: ^z:PD2 # Z_MAX on mcu_z x_offset: 0.0 y_offset: 25.0 @@ -173,13 +171,13 @@ sample_retract_dist: 6.0 [fan] # Print cooling fan -pin: ar9 +pin: PH6 # D9 on mcu_xye kick_start_time: 0.500 [heater_fan hotend_fan] # Hotend fan -pin: z:ar9 +pin: z:PH6 # D9 on mcu_z kick_start_time: 0.500 heater: extruder @@ -187,7 +185,7 @@ heater_temp: 50.0 [heater_fan controller_fan] # Controller fan -pin: z:ar10 +pin: z:PB4 # D10 on mcu_z kick_start_time: 0.500 heater: heater_bed @@ -195,17 +193,17 @@ heater_temp: 45.0 [heater_fan exhaust_fan] # Exhaust fan -pin: z:ar8 +pin: z:PH5 # D8 on mcu_z kick_start_time: 0.500 heater: heater_bed heater_temp: 60.0 [heater_bed] -heater_pin: z:ar11 +heater_pin: z:PB5 # D11 (servo) on mcu_z sensor_type: NTC 100K MGB18-104F39050L32 -sensor_pin: z:analog15 +sensor_pin: z:PK7 # T2 on mcu_z smooth_time: 3.0 max_power: 0.75 @@ -247,14 +245,14 @@ horizontal_move_z: 6 [display] # RepRapDiscount 128x64 Full Graphic Smart Controller lcd_type: st7920 -cs_pin: z:ar16 -sclk_pin: z:ar23 -sid_pin: z:ar17 +cs_pin: z:PH1 +sclk_pin: z:PA1 +sid_pin: z:PH0 # LCD connector on mcu_z menu_timeout: 40 -encoder_pins: ^z:ar33, ^z:ar31 -click_pin: ^!z:ar35 -kill_pin: ^!z:ar41 +encoder_pins: ^z:PC4, ^z:PC6 +click_pin: ^!z:PC2 +kill_pin: ^!z:PG0 ### Macros ### diff --git a/config/kit-zav3d-2019.cfg b/config/kit-zav3d-2019.cfg index 2e6058b6..b27e6017 100644 --- a/config/kit-zav3d-2019.cfg +++ b/config/kit-zav3d-2019.cfg @@ -26,12 +26,12 @@ [stepper_x] -step_pin: ar54 -dir_pin: ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 32 -endstop_pin: ^ar3 +endstop_pin: ^PE5 position_endstop: 0 position_max: 200 homing_speed: 50 @@ -39,25 +39,25 @@ homing_speed: 50 # The stepper_y section is used to describe the Y axis as well as the # stepper controlling the X-Y movement. [stepper_y] -step_pin: ar60 -dir_pin: ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 32 -endstop_pin: ^ar14 +endstop_pin: ^PJ1 position_endstop: 0 position_max: 200 homing_speed: 50 ## Configuration with Z Endstop, without Probe tool like BLTOUCH or others. #[stepper_z] -#step_pin: ar46 -#dir_pin: ar48 -#enable_pin: !ar62 +#step_pin: PL3 +#dir_pin: PL1 +#enable_pin: !PK0 #microsteps: 16 #rotation_distance: 8 ## I used Z_MAX_ENDSTOP -#endstop_pin: ^ar19 +#endstop_pin: ^PD2 ## More about z-calibration is here https://vk.com/topic-107680682_34101598 #position_endstop: 235 #position_max: 235 @@ -66,9 +66,9 @@ homing_speed: 50 ## Configuration for Bltouch probe tool. ## Read more about BLTOUCH here https://www.klipper3d.org/BLTouch.html [stepper_z] -step_pin: ar46 -dir_pin: ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 position_min: -3 @@ -78,16 +78,16 @@ endstop_pin: probe:z_virtual_endstop ## Configuration with PID Calibration. ## Read more here https://www.klipper3d.org/Config_checks.html [extruder] -step_pin: ar26 -dir_pin: !ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: !PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 13.5744 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 min_temp: 0 max_temp: 250 control: pid @@ -98,9 +98,9 @@ pid_kd: 151.598 ## Configuration with PID Calibration. ## Read more here https://www.klipper3d.org/Config_checks.html [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 min_temp: 0 max_temp: 130 control: pid @@ -109,11 +109,10 @@ pid_ki: 1.822 pid_kd: 741.600 [fan] -pin: ar9 +pin: PH6 [mcu] serial: /dev/ttyACM0 -pin_map: arduino [printer] kinematics: corexy @@ -123,8 +122,8 @@ max_z_velocity: 25 max_z_accel: 30 [bltouch] -sensor_pin: ^ar18 -control_pin: ar7 +sensor_pin: ^PD3 +control_pin: PH4 x_offset: 39 y_offset: 11 z_offset: 0.9 diff --git a/config/printer-adimlab-2018.cfg b/config/printer-adimlab-2018.cfg index af73062b..2f02173d 100644 --- a/config/printer-adimlab-2018.cfg +++ b/config/printer-adimlab-2018.cfg @@ -4,50 +4,50 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar25 -dir_pin: !ar23 -enable_pin: !ar27 +step_pin: PA3 +dir_pin: !PA1 +enable_pin: !PA5 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar22 +endstop_pin: ^!PA0 position_min: -5 position_endstop: -5 position_max: 310 homing_speed: 30.0 [stepper_y] -step_pin: ar32 -dir_pin: !ar33 -enable_pin: !ar31 +step_pin: PC5 +dir_pin: !PC4 +enable_pin: !PC6 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar26 +endstop_pin: ^!PA4 position_endstop: 0 position_max: 310 homing_speed: 30.0 [stepper_z] -step_pin: ar35 -dir_pin: ar36 -enable_pin: !ar34 +step_pin: PC2 +dir_pin: PC1 +enable_pin: !PC3 microsteps: 16 rotation_distance: 8 -endstop_pin: ^!ar29 +endstop_pin: ^!PA7 position_endstop: 0.0 position_max: 400 homing_speed: 5.0 [extruder] -step_pin: ar42 -dir_pin: ar43 -enable_pin: !ar37 +step_pin: PL7 +dir_pin: PL6 +enable_pin: !PC0 microsteps: 16 rotation_distance: 34.557 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar2 +heater_pin: PE4 sensor_type: ATC Semitec 104GT-2 -sensor_pin: analog8 +sensor_pin: PK0 control: pid pid_Kp: 15.717 pid_Ki: 0.569 @@ -56,9 +56,9 @@ min_temp: 0 max_temp: 245 [heater_bed] -heater_pin: ar4 +heater_pin: PG5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog10 +sensor_pin: PK2 control: pid pid_Kp: 74.883 pid_Ki: 1.809 @@ -75,7 +75,6 @@ check_gain_time: 120 [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: cartesian @@ -85,7 +84,7 @@ max_z_velocity: 10 max_z_accel: 60 [output_pin stepper_xy_current] -pin: ar44 +pin: PL5 pwm: True scale: 2.0 cycle_time: .000030 @@ -93,7 +92,7 @@ hardware_pwm: True static_value: 1.3 [output_pin stepper_z_current] -pin: ar45 +pin: PL4 pwm: True scale: 2.0 cycle_time: .000030 @@ -101,7 +100,7 @@ hardware_pwm: True static_value: 1.3 [output_pin stepper_e_current] -pin: ar46 +pin: PL3 pwm: True scale: 2.0 cycle_time: .000030 @@ -110,15 +109,15 @@ static_value: 1.25 [display] lcd_type: st7920 -cs_pin: ar20 -sclk_pin: ar14 -sid_pin: ar15 -encoder_pins: ^ar41, ^ar40 -click_pin: ^!ar19 +cs_pin: PD1 +sclk_pin: PJ1 +sid_pin: PJ0 +encoder_pins: ^PG0, ^PG1 +click_pin: ^!PD2 -# The filament runout sensor (on pin ar24) is not currently supported +# The filament runout sensor (on pin PA2) is not currently supported # in Klipper. [output_pin case_light] -pin: ar7 +pin: PH4 value: 1 diff --git a/config/printer-anycubic-4max-2018.cfg b/config/printer-anycubic-4max-2018.cfg index bebd5427..cf41b6c8 100644 --- a/config/printer-anycubic-4max-2018.cfg +++ b/config/printer-anycubic-4max-2018.cfg @@ -4,51 +4,51 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar54 -dir_pin: ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar3 +endstop_pin: ^!PE5 position_min: -2 position_endstop: -2 position_max: 205 homing_speed: 60.0 [stepper_y] -step_pin: ar60 -dir_pin: ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar14 +endstop_pin: ^!PJ1 position_endstop: 0 position_max: 215 homing_speed: 60.0 [stepper_z] -step_pin: ar46 -dir_pin: ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 -endstop_pin: ^!ar18 +endstop_pin: ^!PD3 position_endstop: 0.5 position_max: 305 homing_speed: 8.0 [extruder] -step_pin: ar26 -dir_pin: ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 33.133 nozzle_diameter: 0.400 filament_diameter: 1.750 max_extrude_only_distance: 2000 -heater_pin: ar10 +heater_pin: PB4 sensor_type: ATC Semitec 104GT-2 -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_kp: 27.725 pid_ki: 1.224 @@ -57,9 +57,9 @@ min_temp: 0 max_temp: 300 [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: pid pid_kp: 73.735 pid_ki: 1.437 @@ -68,12 +68,11 @@ min_temp: 0 max_temp: 110 [fan] -pin: ar9 +pin: PH6 kick_start_time: 1.0 [mcu] serial: /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0 -pin_map: arduino [printer] kinematics: cartesian @@ -83,23 +82,23 @@ max_z_velocity: 40 max_z_accel: 60 [heater_fan extruder_fan] -pin: ar44 +pin: PL5 [heater_fan stepstick_fan] -pin: ar7 +pin: PH4 kick_start_time: 1.0 [display] lcd_type: st7920 -cs_pin: ar16 -sclk_pin: ar23 -sid_pin: ar17 -encoder_pins: ^ar31, ^ar33 -click_pin: ^!ar35 -kill_pin: ^!ar41 +cs_pin: PH1 +sclk_pin: PA1 +sid_pin: PH0 +encoder_pins: ^PC6, ^PC4 +click_pin: ^!PC2 +kill_pin: ^!PG0 [filament_switch_sensor e0_sensor] -switch_pin: ar19 +switch_pin: PD2 [gcode_macro START_PRINT] gcode: diff --git a/config/printer-anycubic-i3-mega-2017.cfg b/config/printer-anycubic-i3-mega-2017.cfg index 588fcd62..446db16e 100644 --- a/config/printer-anycubic-i3-mega-2017.cfg +++ b/config/printer-anycubic-i3-mega-2017.cfg @@ -7,58 +7,58 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar54 -dir_pin: !ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: !PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar3 +endstop_pin: ^!PE5 position_min: -5 position_endstop: -5 position_max: 210 homing_speed: 30.0 [stepper_y] -step_pin: ar60 -dir_pin: ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar42 +endstop_pin: ^!PL7 position_endstop: 0 position_max: 210 homing_speed: 30.0 [stepper_z] -step_pin: ar46 -dir_pin: ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 -endstop_pin: ^!ar18 +endstop_pin: ^!PD3 position_endstop: 0.0 position_max: 205 homing_speed: 5.0 [stepper_z1] -step_pin: ar36 -dir_pin: ar34 -enable_pin: !ar30 +step_pin: PC1 +dir_pin: PC3 +enable_pin: !PC7 microsteps: 16 rotation_distance: 8 -endstop_pin: ^!ar43 +endstop_pin: ^!PL6 [extruder] -step_pin: ar26 -dir_pin: ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 34.557 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: ATC Semitec 104GT-2 -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 15.717 pid_Ki: 0.569 @@ -67,12 +67,12 @@ min_temp: 0 max_temp: 245 [heater_fan extruder_fan] -pin: ar44 +pin: PL5 [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: pid pid_Kp: 74.883 pid_Ki: 1.809 @@ -81,11 +81,10 @@ min_temp: 0 max_temp: 110 [fan] -pin: ar9 +pin: PH6 [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: cartesian @@ -95,4 +94,4 @@ max_z_velocity: 10 max_z_accel: 60 [heater_fan stepstick_fan] -pin: ar7 +pin: PH4 diff --git a/config/printer-anycubic-kossel-2016.cfg b/config/printer-anycubic-kossel-2016.cfg index 38e52e98..7df93b41 100644 --- a/config/printer-anycubic-kossel-2016.cfg +++ b/config/printer-anycubic-kossel-2016.cfg @@ -8,12 +8,12 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_a] -step_pin: ar54 -dir_pin: !ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: !PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar2 +endstop_pin: ^PE4 homing_speed: 60 # The next parameter needs to be adjusted for # your printer. You may want to start with 280 @@ -23,32 +23,32 @@ position_endstop: 273.0 arm_length: 229.4 [stepper_b] -step_pin: ar60 -dir_pin: !ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: !PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar15 +endstop_pin: ^PJ0 [stepper_c] -step_pin: ar46 -dir_pin: !ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: !PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar19 +endstop_pin: ^PD2 [extruder] -step_pin: ar26 -dir_pin: !ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: !PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 35.165 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 25.349 pid_Ki: 1.216 @@ -58,23 +58,22 @@ min_temp: 0 max_temp: 275 #[heater_bed] -#heater_pin: ar8 +#heater_pin: PH5 #sensor_type: EPCOS 100K B57560G104F -#sensor_pin: analog14 +#sensor_pin: PK6 #control: watermark #min_temp: 0 #max_temp: 130 [fan] -pin: ar9 +pin: PH6 kick_start_time: 0.200 [heater_fan extruder_cooler_fan] -pin: ar44 +pin: PL5 [mcu] serial: /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0 -pin_map: arduino [printer] kinematics: delta @@ -102,12 +101,12 @@ timeout: 360 # "RepRapDiscount 2004 Smart Controller" type displays [display] lcd_type: hd44780 -rs_pin: ar16 -e_pin: ar17 -d4_pin: ar23 -d5_pin: ar25 -d6_pin: ar27 -d7_pin: ar29 -encoder_pins: ^ar31, ^ar33 -click_pin: ^!ar35 -kill_pin: ^!ar41 +rs_pin: PH1 +e_pin: PH0 +d4_pin: PA1 +d5_pin: PA3 +d6_pin: PA5 +d7_pin: PA7 +encoder_pins: ^PC6, ^PC4 +click_pin: ^!PC2 +kill_pin: ^!PG0 diff --git a/config/printer-anycubic-kossel-plus-2017.cfg b/config/printer-anycubic-kossel-plus-2017.cfg index 12c61102..de984caa 100644 --- a/config/printer-anycubic-kossel-plus-2017.cfg +++ b/config/printer-anycubic-kossel-plus-2017.cfg @@ -8,12 +8,12 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_a] -step_pin: ar54 -dir_pin: !ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: !PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar2 +endstop_pin: ^PE4 homing_speed: 60 # The next parameter needs to be adjusted for # your printer. You may want to start with 280 @@ -23,32 +23,32 @@ position_endstop: 295.6 arm_length: 269.0 [stepper_b] -step_pin: ar60 -dir_pin: !ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: !PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar15 +endstop_pin: ^PJ0 [stepper_c] -step_pin: ar46 -dir_pin: !ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: !PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar19 +endstop_pin: ^PD2 [extruder] -step_pin: ar26 -dir_pin: !ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: !PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 33.333 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 25.349 pid_Ki: 1.216 @@ -58,9 +58,9 @@ min_temp: 0 max_temp: 275 [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: pid pid_kp: 73.517 pid_ki: 1.132 @@ -69,21 +69,20 @@ min_temp: 0 max_temp: 130 [fan] -pin: ar9 +pin: PH6 kick_start_time: 0.200 [heater_fan extruder_cooler_fan] -pin: ar44 +pin: PL5 # if you want to use your probe for DELTA_CALIBRATE you will need that #[probe] -#pin: ^ar18 +#pin: ^PD3 #z_offset: 15.9 #samples: 3 [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: delta @@ -105,12 +104,12 @@ radius: 115 # "RepRapDiscount 2004 Smart Controller" type displays [display] lcd_type: hd44780 -rs_pin: ar16 -e_pin: ar17 -d4_pin: ar23 -d5_pin: ar25 -d6_pin: ar27 -d7_pin: ar29 -encoder_pins: ^ar31, ^ar33 -click_pin: ^!ar35 -kill_pin: ^!ar41 +rs_pin: PH1 +e_pin: PH0 +d4_pin: PA1 +d5_pin: PA3 +d6_pin: PA5 +d7_pin: PA7 +encoder_pins: ^PC6, ^PC4 +click_pin: ^!PC2 +kill_pin: ^!PG0 diff --git a/config/printer-creality-cr10s-2017.cfg b/config/printer-creality-cr10s-2017.cfg index 5212565c..be860e9e 100644 --- a/config/printer-creality-cr10s-2017.cfg +++ b/config/printer-creality-cr10s-2017.cfg @@ -4,48 +4,48 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar54 -dir_pin: ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar3 +endstop_pin: ^PE5 position_endstop: 0 position_max: 300 homing_speed: 50 [stepper_y] -step_pin: ar60 -dir_pin: ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar14 +endstop_pin: ^PJ1 position_endstop: 0 position_max: 300 homing_speed: 50 [stepper_z] -step_pin: ar46 -dir_pin: !ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: !PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 -endstop_pin: ^ar18 +endstop_pin: ^PD3 position_endstop: 0 position_max: 400 [extruder] -step_pin: ar26 -dir_pin: ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 33.683 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 22.2 pid_Ki: 1.08 @@ -54,9 +54,9 @@ min_temp: 0 max_temp: 250 [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: ATC Semitec 104GT-2 -sensor_pin: analog14 +sensor_pin: PK6 control: pid pid_Kp: 690.34 pid_Ki: 111.47 @@ -65,11 +65,10 @@ min_temp: 0 max_temp: 130 [fan] -pin: ar9 +pin: PH6 [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: cartesian @@ -80,8 +79,8 @@ max_z_accel: 100 [display] lcd_type: st7920 -cs_pin: ar16 -sclk_pin: ar23 -sid_pin: ar17 -encoder_pins: ^ar33, ^ar31 -click_pin: ^!ar35 +cs_pin: PH1 +sclk_pin: PA1 +sid_pin: PH0 +encoder_pins: ^PC4, ^PC6 +click_pin: ^!PC2 diff --git a/config/printer-longer-lk4-pro-2019.cfg b/config/printer-longer-lk4-pro-2019.cfg index 2057c6ab..412ece2f 100644 --- a/config/printer-longer-lk4-pro-2019.cfg +++ b/config/printer-longer-lk4-pro-2019.cfg @@ -5,34 +5,34 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar54 -dir_pin: !ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: !PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar3 +endstop_pin: ^!PE5 position_endstop: 0 position_max: 235 homing_speed: 50 [stepper_y] -step_pin: ar60 -dir_pin: ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar14 +endstop_pin: ^!PJ1 position_endstop: 0 position_max: 235 homing_speed: 50 [stepper_z] -step_pin: ar46 -dir_pin: !ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: !PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 -endstop_pin: ^!ar35 +endstop_pin: ^!PC2 # Uncomment for BLTouch # endstop_pin: probe:z_virtual_endstop position_endstop: 0.5 @@ -55,8 +55,8 @@ position_max: 250 # According this follow mapping : # https://arduiblog.com/2020/06/22/installation-dun-bltouch-sur-lalfawise-u30-pro/ # & see "Branchement" paragraph & picture -# sensor_pin: ^ar35 -# control_pin: ar7 +# sensor_pin: ^PC2 +# control_pin: PH4 # If you use this fang : https://www.thingiverse.com/thing:3603067 # you can use this follow values for x & y offset # x_offset: -28 @@ -70,16 +70,16 @@ position_max: 250 # probe_count: 4,3 [extruder] -step_pin: ar26 -dir_pin: !ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: !PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 34.5576 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 22.2 pid_Ki: 1.08 @@ -88,22 +88,21 @@ min_temp: 0 max_temp: 250 [filament_switch_sensor filament_sensor] -switch_pin: ^!ar2 +switch_pin: ^!PE4 [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: watermark min_temp: 0 max_temp: 130 [fan] -pin: ar9 +pin: PH6 [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: cartesian diff --git a/config/printer-micromake-d1-2016.cfg b/config/printer-micromake-d1-2016.cfg index e221602f..928f7995 100644 --- a/config/printer-micromake-d1-2016.cfg +++ b/config/printer-micromake-d1-2016.cfg @@ -5,43 +5,43 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_a] -step_pin: ar54 -dir_pin: !ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: !PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 32 -endstop_pin: ^ar2 +endstop_pin: ^PE4 homing_speed: 100 position_endstop: 319.5 arm_length: 217.0 [stepper_b] -step_pin: ar60 -dir_pin: !ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: !PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 32 -endstop_pin: ^ar15 +endstop_pin: ^PJ0 [stepper_c] -step_pin: ar46 -dir_pin: !ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: !PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 32 -endstop_pin: ^ar19 +endstop_pin: ^PD2 [extruder] -step_pin: ar26 -dir_pin: ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 20.067 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 22.2 pid_Ki: 1.08 @@ -51,11 +51,10 @@ max_temp: 250 max_extrude_only_distance: 100.0 [fan] -pin: ar9 +pin: PH6 [mcu] serial: /dev/ttyACM0 -pin_map: arduino [printer] kinematics: delta @@ -68,16 +67,16 @@ delta_radius: 95 radius: 80 #[probe] -#pin: ^!ar18 +#pin: ^!PD3 [display] lcd_type: hd44780 -rs_pin: ar16 -e_pin: ar17 -d4_pin: ar23 -d5_pin: ar25 -d6_pin: ar27 -d7_pin: ar29 -encoder_pins: ^ar31, ^ar33 -click_pin: ^!ar35 -kill_pin: ^!ar41 +rs_pin: PH1 +e_pin: PH0 +d4_pin: PA1 +d5_pin: PA3 +d6_pin: PA5 +d7_pin: PA7 +encoder_pins: ^PC6, ^PC4 +click_pin: ^!PC2 +kill_pin: ^!PG0 diff --git a/config/printer-sovol-sv01-2020.cfg b/config/printer-sovol-sv01-2020.cfg index 57d3c4ef..dbbd0a7f 100644 --- a/config/printer-sovol-sv01-2020.cfg +++ b/config/printer-sovol-sv01-2020.cfg @@ -5,48 +5,48 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar54 -dir_pin: ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar3 +endstop_pin: ^PE5 position_endstop: 0 position_max: 300 homing_speed: 50 [stepper_y] -step_pin: ar60 -dir_pin: ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar14 +endstop_pin: ^PJ1 position_endstop: 0 position_max: 255 homing_speed: 50 [stepper_z] -step_pin: ar46 -dir_pin: !ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: !PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 -endstop_pin: ^ar18 +endstop_pin: ^PD3 position_endstop: 0 position_max: 300 [extruder] -step_pin: ar26 -dir_pin: !ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: !PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 7.680 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 31.147 pid_Ki: 2.076 @@ -55,9 +55,9 @@ min_temp: 0 max_temp: 265 [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: pid pid_Kp: 72.174 pid_Ki: 1.816 @@ -66,15 +66,14 @@ min_temp: 0 max_temp: 110 [filament_switch_sensor my_sensor] -switch_pin: ar2 +switch_pin: PE4 pause_on_runout: True [fan] -pin: ar9 +pin: PH6 [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: cartesian @@ -85,8 +84,8 @@ max_z_accel: 100 [display] lcd_type: st7920 -cs_pin: ar16 -sclk_pin: ar23 -sid_pin: ar17 -encoder_pins: ^ar33, ^ar31 -click_pin: ^!ar35 +cs_pin: PH1 +sclk_pin: PA1 +sid_pin: PH0 +encoder_pins: ^PC4, ^PC6 +click_pin: ^!PC2 diff --git a/config/printer-sunlu-s8-2020.cfg b/config/printer-sunlu-s8-2020.cfg index b933ced8..ccf07d21 100644 --- a/config/printer-sunlu-s8-2020.cfg +++ b/config/printer-sunlu-s8-2020.cfg @@ -1,53 +1,53 @@ # This file contains pin mappings for the SUNLU S8 v1.01 (circa 2020), which # is a modified RAMPS v1.3 board. To use this config, the firmware should be # compiled for the AVR atmega2560. The following pins are available for -# expansion (e.g. ABL): ^ar19 (Z+ endstop), ar4, ar5, ar6, ar11 +# expansion (e.g. ABL): ^PD2 (Z+ endstop), PG5, PE3, PH3, PB5 # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar54 -dir_pin: !ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: !PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar3 +endstop_pin: ^!PE5 position_endstop: 0 position_max: 310 homing_speed: 50 [stepper_y] -step_pin: ar60 -dir_pin: !ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: !PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar14 +endstop_pin: ^!PJ1 position_endstop: 0 position_max: 310 homing_speed: 50 [stepper_z] -step_pin: ar46 -dir_pin: ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 -endstop_pin: ^!ar18 +endstop_pin: ^!PD3 position_endstop: 0.5 position_max: 400 [extruder] -step_pin: ar26 -dir_pin: !ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: !PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 33.280 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_kp: 25.588 pid_ki: 1.496 @@ -57,12 +57,12 @@ max_temp: 250 [filament_switch_sensor runout] pause_on_runout: True -switch_pin: ^ar2 +switch_pin: ^PE4 [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: pid pid_kp: 74.786 pid_ki: 0.766 @@ -77,14 +77,13 @@ max_temp: 110 check_gain_time: 240 [fan] -pin: ar9 +pin: PH6 [heater_fan fan1] -pin: ar7 +pin: PH4 [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: cartesian @@ -95,11 +94,11 @@ max_z_accel: 100 [display] lcd_type: st7920 -cs_pin: ar16 -sclk_pin: ar23 -sid_pin: ar17 -encoder_pins: ^ar33, ^ar31 -click_pin: ^!ar35 +cs_pin: PH1 +sclk_pin: PA1 +sid_pin: PH0 +encoder_pins: ^PC4, ^PC6 +click_pin: ^!PC2 [output_pin beeper] -pin: ar37 +pin: PC0 diff --git a/config/printer-tevo-flash-2018.cfg b/config/printer-tevo-flash-2018.cfg index e6bf3e86..210419ae 100644 --- a/config/printer-tevo-flash-2018.cfg +++ b/config/printer-tevo-flash-2018.cfg @@ -8,33 +8,33 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar54 -dir_pin: !ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: !PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: !ar3 +endstop_pin: !PE5 position_endstop: -13 position_min: -13 position_max: 235 homing_speed: 50 [stepper_y] -step_pin: ar60 -dir_pin: ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: !ar14 +endstop_pin: !PJ1 position_endstop: -3 position_min: -3 position_max: 235 homing_speed: 50 [stepper_z] -step_pin: ar46 -dir_pin: ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 position_max: 250 @@ -42,24 +42,24 @@ endstop_pin: probe:z_virtual_endstop position_min: -2 [stepper_z1] -step_pin: ar36 -dir_pin: ar34 -enable_pin: !ar30 +step_pin: PC1 +dir_pin: PC3 +enable_pin: !PC7 microsteps: 16 rotation_distance: 8 [extruder] -step_pin: ar26 -dir_pin: ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: PA6 +enable_pin: !PA2 microsteps: 16 gear_ratio: 50:17 rotation_distance: 22.598 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 18.547 pid_Ki: 0.788 @@ -68,9 +68,9 @@ min_temp: 0 max_temp: 250 [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: pid pid_Kp: 38.824 pid_Ki: 0.539 @@ -79,14 +79,13 @@ min_temp: 0 max_temp: 70 [heater_fan my_nozzle_fan] -pin: ar7 +pin: PH4 [fan] -pin: ar9 +pin: PH6 [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: cartesian @@ -97,15 +96,15 @@ max_z_accel: 100 [display] lcd_type: uc1701 -cs_pin: ar25 -a0_pin: ar27 -encoder_pins: ^!ar31, ^!ar33 -click_pin: ^!ar35 -kill_pin: ar64 +cs_pin: PA3 +a0_pin: PA5 +encoder_pins: ^!PC6, ^!PC4 +click_pin: ^!PC2 +kill_pin: PK2 [bltouch] -sensor_pin: ar18 -control_pin: ar11 +sensor_pin: PD3 +control_pin: PB5 x_offset: 0 y_offset: 18 z_offset: 1.64 diff --git a/config/printer-tevo-tarantula-pro-2020.cfg b/config/printer-tevo-tarantula-pro-2020.cfg index 9a32c83b..b4efd63d 100644 --- a/config/printer-tevo-tarantula-pro-2020.cfg +++ b/config/printer-tevo-tarantula-pro-2020.cfg @@ -8,58 +8,58 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar54 -dir_pin: !ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: !PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar3 +endstop_pin: ^!PE5 position_endstop: -2 position_max: 220 position_min: -2 homing_speed: 25.0 [stepper_y] -step_pin: ar60 -dir_pin: ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar14 +endstop_pin: ^!PJ1 position_endstop: 0 position_max: 220 homing_speed: 25.0 [stepper_z] -step_pin: ar46 -dir_pin: ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 -endstop_pin: ^!ar18 +endstop_pin: ^!PD3 position_endstop: 0 position_max: 200 # Enable for dual-z addon #[stepper_z1] -#step_pin: ar36 -#dir_pin: ar34 -#enable_pin: !ar30 +#step_pin: PC1 +#dir_pin: PC3 +#enable_pin: !PC7 #microsteps: 16 #rotation_distance: 8 [extruder] -step_pin: ar26 -dir_pin: ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 7.904 nozzle_diameter: 0.400 filament_diameter: 1.75 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 22.5 pid_Ki: 1.78 @@ -68,19 +68,18 @@ min_temp: 0 max_temp: 220 [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: watermark min_temp: 0 max_temp: 110 [fan] -pin: ar9 +pin: PH6 [mcu] serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0 -pin_map: arduino [printer] kinematics: cartesian @@ -90,13 +89,13 @@ max_z_velocity: 50 max_z_accel: 100 [heater_fan nozzle_fan] -pin: ar7 +pin: PH4 [display] lcd_type: uc1701 -cs_pin: ar25 -a0_pin: ar27 -encoder_pins: ^!ar31, ^!ar33 -click_pin: ^!ar35 -kill_pin: !ar41 +cs_pin: PA3 +a0_pin: PA5 +encoder_pins: ^!PC6, ^!PC4 +click_pin: ^!PC2 +kill_pin: !PG0 menu_reverse_navigation: true diff --git a/config/printer-velleman-k8200-2013.cfg b/config/printer-velleman-k8200-2013.cfg index 7bdce33a..b431378b 100644 --- a/config/printer-velleman-k8200-2013.cfg +++ b/config/printer-velleman-k8200-2013.cfg @@ -7,52 +7,52 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar54 -dir_pin: !ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: !PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar3 +endstop_pin: ^PE5 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_y] -step_pin: ar60 -dir_pin: !ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: !PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar14 +endstop_pin: ^PJ1 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_z] -step_pin: ar46 -dir_pin: !ar48 -enable_pin: !ar63 +step_pin: PL3 +dir_pin: !PL1 +enable_pin: !PK1 microsteps: 16 rotation_distance: 8 -endstop_pin: ^ar18 +endstop_pin: ^PD3 position_endstop: 0.5 # Set position_max to 200 if you have the original Z-axis setup. position_max: 250 [extruder] -step_pin: ar26 +step_pin: PA4 # Remove the "!" from dir_pin if you have an original extruder -dir_pin: !ar28 -enable_pin: !ar24 +dir_pin: !PA6 +enable_pin: !PA2 # You will have to calculate your own rotation_distance. # This is for the belted extruder https://www.thingiverse.com/thing:339928 microsteps: 16 rotation_distance: 4.266 nozzle_diameter: 0.400 filament_diameter: 2.85 -heater_pin: ar10 +heater_pin: PB4 sensor_type: ATC Semitec 104GT-2 -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 21.503 pid_Ki: 1.103 @@ -61,9 +61,9 @@ min_temp: 0 max_temp: 250 [heater_bed] -heater_pin: ar9 +heater_pin: PH6 sensor_type: ATC Semitec 104GT-2 -sensor_pin: analog14 +sensor_pin: PK6 control: pid pid_Kp: 75.283 pid_Ki: 0.588 @@ -72,12 +72,11 @@ min_temp: 0 max_temp: 130 [fan] -pin: ar8 +pin: PH5 kick_start_time: 0.500 [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: cartesian @@ -89,11 +88,11 @@ max_z_accel: 100 # The LCD is untested - "RepRapDiscount 2004 Smart Controller" displays #[display] #lcd_type: hd44780 -#rs_pin: ar27 -#e_pin: ar29 -#d4_pin: ar37 -#d5_pin: ar35 -#d6_pin: ar33 -#d7_pin: ar31 -#encoder_pins: ^ar16, ^ar17 -#click_pin: ^!ar23 +#rs_pin: PA5 +#e_pin: PA7 +#d4_pin: PC0 +#d5_pin: PC2 +#d6_pin: PC4 +#d7_pin: PC6 +#encoder_pins: ^PH1, ^PH0 +#click_pin: ^!PA1 diff --git a/config/printer-wanhao-duplicator-9-2018.cfg b/config/printer-wanhao-duplicator-9-2018.cfg index 8197c796..e3f5beeb 100644 --- a/config/printer-wanhao-duplicator-9-2018.cfg +++ b/config/printer-wanhao-duplicator-9-2018.cfg @@ -5,31 +5,31 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar61 -dir_pin: !ar62 -enable_pin: !ar60 +step_pin: PF7 +dir_pin: !PK0 +enable_pin: !PF6 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar54 +endstop_pin: ^!PF0 position_endstop: 0 position_max: 295 homing_speed: 30.0 [stepper_y] -step_pin: ar64 -dir_pin: ar65 -enable_pin: !ar2 +step_pin: PK2 +dir_pin: PK3 +enable_pin: !PE4 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar24 +endstop_pin: ^!PA2 position_endstop: 0 position_max: 290 homing_speed: 30.0 [stepper_z] -step_pin: ar67 -dir_pin: ar69 -enable_pin: !ar66 +step_pin: PK5 +dir_pin: PK7 +enable_pin: !PK4 microsteps: 16 rotation_distance: 8 endstop_pin: probe:z_virtual_endstop @@ -37,16 +37,16 @@ position_max: 370 position_min: -0.99 [extruder] -step_pin: ar58 -dir_pin: ar59 -enable_pin: !ar57 +step_pin: PF4 +dir_pin: PF5 +enable_pin: !PF3 microsteps: 16 rotation_distance: 31.936 nozzle_diameter: 0.4 filament_diameter: 1.75 -heater_pin: ar4 +heater_pin: PG5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog1 +sensor_pin: PF1 control: pid pid_Kp: 33.41 pid_Ki: 1.47 @@ -55,9 +55,9 @@ min_temp: 0 max_temp: 315 [heater_bed] -heater_pin: ar3 +heater_pin: PE5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: pid pid_Kp: 64.095903 pid_Ki: 1.649830 @@ -66,10 +66,10 @@ min_temp: 0 max_temp: 120 [fan] -pin: ar5 +pin: PE3 [probe] -pin: !ar6 +pin: !PH3 x_offset: 27 y_offset: 3 z_offset: 1.4 @@ -80,7 +80,6 @@ samples_result: average [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: cartesian diff --git a/config/printer-wanhao-duplicator-i3-mini-2017.cfg b/config/printer-wanhao-duplicator-i3-mini-2017.cfg index bbcd04d7..1fc8a46c 100644 --- a/config/printer-wanhao-duplicator-i3-mini-2017.cfg +++ b/config/printer-wanhao-duplicator-i3-mini-2017.cfg @@ -7,48 +7,48 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar22 -dir_pin: !ar23 -enable_pin: !ar57 +step_pin: PA0 +dir_pin: !PA1 +enable_pin: !PF3 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar19 +endstop_pin: ^!PD2 position_endstop: 120 position_max: 120 homing_speed: 30.0 [stepper_y] -step_pin: ar25 -dir_pin: ar26 -enable_pin: !ar24 +step_pin: PA3 +dir_pin: PA4 +enable_pin: !PA2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar18 +endstop_pin: ^!PD3 position_endstop: 0 position_max: 135 homing_speed: 30.0 [stepper_z] -step_pin: ar29 -dir_pin: ar39 -enable_pin: !ar28 +step_pin: PA7 +dir_pin: PG2 +enable_pin: !PA6 microsteps: 16 rotation_distance: 8 -endstop_pin: ^!ar38 +endstop_pin: ^!PD7 position_endstop: 0.5 position_max: 100 [extruder] -step_pin: ar55 -dir_pin: !ar56 -enable_pin: !ar54 +step_pin: PF1 +dir_pin: !PF2 +enable_pin: !PF0 microsteps: 16 rotation_distance: 34.043 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar4 +heater_pin: PG5 sensor_type: NTC 100K MGB18-104F39050L32 -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 22.2 pid_Ki: 1.08 @@ -57,11 +57,10 @@ min_temp: 1 max_temp: 265 [fan] -pin: ar12 +pin: PB6 [mcu] serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0 -pin_map: arduino [printer] kinematics: cartesian @@ -72,9 +71,9 @@ max_z_accel: 100 [display] lcd_type: uc1701 -cs_pin: ar41 -a0_pin: ar40 -rst_pin: ar27 -click_pin: ^!ar5 -encoder_pins: ^ar3, ^ar2 -kill_pin: ar64 +cs_pin: PG0 +a0_pin: PG1 +rst_pin: PA5 +click_pin: ^!PE3 +encoder_pins: ^PE5, ^PE4 +kill_pin: PK2