3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Updates to printer-wanhao-duplicator-i3-v2.1-2017.cfg 

Add lcd encoder pins. Add comment on 10K pullups.

Signed-off-by: Carlos Felicio <cfeliciomobil@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
cfelicio 2018-08-24 19:32:45 -07:00 committed by Kevin O'Connor
parent 22132a5516
commit 79632878ac
1 changed files with 8 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
config/printer-wanhao-duplicator-i3-v2.1-2017.cfg
View File

@ -65,6 +65,12 @@
# (like an upgraded hot end or a separate MOSFET for your heated bed), you may # (like an upgraded hot end or a separate MOSFET for your heated bed), you may
# want to increase these values. # want to increase these values.
# #
# Note: Some Melzi boards were shipped with 10K pullup resistors
# instead of 4.7K. If the temperatures on your printer seem way
# off before running the PID tune, you may need to add
# "pullup_resistor: 10000" to both the extruder and the heater_bed
# config sections.
#
# * [mcu] > serial # * [mcu] > serial
# #
# Enter the USB serial port of the printer in /dev/serial/by-id/ format # Enter the USB serial port of the printer in /dev/serial/by-id/ format
@ -157,3 +163,5 @@ lcd_type: st7920
cs_pin: PC1 cs_pin: PC1
sclk_pin: PD3 sclk_pin: PD3
sid_pin: PC0 sid_pin: PC0
encoder_pins: ^PA2, ^PA1
click_pin: ^!PA3