3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

doc: updates to Installation.md (#6398) 

omit rpi device version nrs

rpi2 or newer

Signed-off-by: Thijs Triemstra <info@collab.nl>
This commit is contained in:
Thijs Triemstra 2023-12-04 03:10:59 +01:00 committed by GitHub
parent 38221df83a
commit 795ce490a0
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 8 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
docs/Installation.md
View File

@ -2,7 +2,7 @@
These instructions assume the software will run on a Raspberry Pi
computer in conjunction with OctoPrint. It is recommended that a
Raspberry Pi 2, 3, or 4 computer be used as the host machine (see the
Raspberry Pi 2 (or later) be used as the host machine (see the
[FAQ](FAQ.md#can-i-run-klipper-on-something-other-than-a-raspberry-pi-3)
for other machines).
@ -50,7 +50,7 @@ using a Linux or MacOS desktop, then the "ssh" software should already
be installed on the desktop. There are free ssh clients available for
other desktops (eg,
[PuTTY](https://www.chiark.greenend.org.uk/~sgtatham/putty/)). Use the
ssh utility to connect to the Raspberry Pi (ssh pi@octopi -- password
ssh utility to connect to the Raspberry Pi (`ssh pi@octopi` -- password
is "raspberry") and run the following commands:
```
@ -135,18 +135,18 @@ web page and then configure the following items:
Navigate to the Settings tab (the wrench icon at the top of the
page). Under "Serial Connection" in "Additional serial ports" add
"/tmp/printer". Then click "Save".
`/tmp/printer`. Then click "Save".
Enter the Settings tab again and under "Serial Connection" change the
"Serial Port" setting to "/tmp/printer".
"Serial Port" setting to `/tmp/printer`.
In the Settings tab, navigate to the "Behavior" sub-tab and select the
"Cancel any ongoing prints but stay connected to the printer"
option. Click "Save".
From the main page, under the "Connection" section (at the top left of
the page) make sure the "Serial Port" is set to "/tmp/printer" and
click "Connect". (If "/tmp/printer" is not an available selection then
the page) make sure the "Serial Port" is set to `/tmp/printer` and
click "Connect". (If `/tmp/printer` is not an available selection then
try reloading the page.)
Once connected, navigate to the "Terminal" tab and type "status"
@ -165,8 +165,8 @@ Arguably the easiest way to set the Klipper configuration file is to
use a desktop editor that supports editing files over the "scp" and/or
"sftp" protocols. There are freely available tools that support this
(eg, Notepad++, WinSCP, and Cyberduck). Load the printer config file
in the editor and then save it as a file named "printer.cfg" in the
home directory of the pi user (ie, /home/pi/printer.cfg).
in the editor and then save it as a file named `printer.cfg` in the
home directory of the pi user (ie, `/home/pi/printer.cfg`).
Alternatively, one can also copy and edit the file directly on the
Raspberry Pi via ssh. That may look something like the following (be