config: Use tmc2660 virtual_enable in generic-duet2.cfg

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-06-12 23:45:14 -04:00 committed by KevinOConnor
parent b0c459d8bf
commit 7947dc3389
1 changed files with 10 additions and 10 deletions

View File

@ -86,7 +86,7 @@
[stepper_x]
step_pin: PD6
dir_pin: PD11
enable_pin: !PC6 # shared between all steppers
enable_pin: !PC6, tmc2660_stepper_x:virtual_enable
step_distance: .0125
endstop_pin: ^PC14
position_endstop: 0
@ -104,7 +104,7 @@ idle_current_percent: 20
[stepper_y]
step_pin: PD7
dir_pin: !PD12
enable_pin: !PC6
enable_pin: !PC6, tmc2660_stepper_y:virtual_enable
step_distance: .0125
endstop_pin: ^PA2
position_endstop: 0
@ -122,7 +122,7 @@ idle_current_percent: 20
[stepper_z]
step_pin: PD8
dir_pin: PD13
enable_pin: !PC6
enable_pin: !PC6, tmc2660_stepper_z:virtual_enable
step_distance: .0025
endstop_pin: ^PD29
position_endstop: 0.5
@ -140,7 +140,7 @@ sense_resistor: 0.051
[stepper_z1]
step_pin: PD0
dir_pin: PD16
enable_pin: !PC6
enable_pin: !PC6, tmc2660_stepper_z1:virtual_enable
step_distance: .0025
[tmc2660 stepper_z1]
@ -155,7 +155,7 @@ sense_resistor: 0.051
[stepper_z2]
step_pin: PD3
dir_pin: !PD17
enable_pin: !PC6
enable_pin: !PC6, tmc2660_stepper_z2:virtual_enable
step_distance: .0025
[tmc2660 stepper_z2]
@ -170,7 +170,7 @@ sense_resistor: 0.051
[stepper_z3]
step_pin: PD21
dir_pin: !PA25
enable_pin: !PC6
enable_pin: !PC6, tmc2660_stepper_z3:virtual_enable
step_distance: .0025
[tmc2660 stepper_z3]
@ -185,7 +185,7 @@ sense_resistor: 0.051
[extruder0]
step_pin: PD5
dir_pin: PA1
enable_pin: !PC6
enable_pin: !PC6, tmc2660_extruder0:virtual_enable
step_distance: .002
nozzle_diameter: 0.400
filament_diameter: 1.750
@ -211,7 +211,7 @@ sense_resistor: 0.051
[extruder1]
step_pin: PD4
dir_pin: PD9
enable_pin: !PC6
enable_pin: !PC6, tmc2660_extruder1:virtual_enable
step_distance: .002
nozzle_diameter: 0.400
filament_diameter: 1.750
@ -237,7 +237,7 @@ sense_resistor: 0.051
[extruder2]
step_pin: PD2
dir_pin: !PD28
enable_pin: !PC6
enable_pin: !PC6, tmc2660_extruder2:virtual_enable
step_distance: .002
nozzle_diameter: 0.400
filament_diameter: 1.750
@ -263,7 +263,7 @@ sense_resistor: 0.051
[extruder3]
step_pin: PD1
dir_pin: !PD22
enable_pin: !PC6
enable_pin: !PC6, tmc2660_extruder3:virtual_enable
step_distance: .002
nozzle_diameter: 0.400
filament_diameter: 1.750