3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Update description of printer-tevo-flash-2018.cfg 

Reported by @RadianceNL.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-03-24 10:56:20 -04:00
parent 9aadc3c7fa
commit 74f9da8376
1 changed files with 9 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
config/printer-tevo-flash-2018.cfg
View File

@ -1,5 +1,11 @@
# Support for Tevo Flash using a Bondtech BMG extruder. To use this
# config, the firmware should be compiled for the AVR atmega2560.
# Support for Tevo Flash. To use this config, the firmware should be
# compiled for the AVR atmega2560.
# Note, this config has only been tested on a modified Tevo Flash
# (using a Bondtech BMG extruder). If using a stock printer it may be
# necessary to update the extruder step_distance parameter.
# See the example.cfg file for a description of available parameters.
[stepper_x]
step_pin: ar54
@ -43,7 +49,7 @@ step_pin: ar26
dir_pin: ar28
enable_pin: !ar24
step_distance: .002401
nozzle_diameter: 0.600
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: ar10
sensor_type: EPCOS 100K B57560G104F