3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Update generic-th3d-ezboard-lite-v2.0.cfg (#5785) 

Corrected the build instructions for the TH3D EZBoard V2 to include the command to convert Klipper.elf to a SREC bin format named firmware.bin. The SREC format is required for the bootloader installed on the board.

Signed-off-by: Anthony Dellett <anthony.dellett@gmail.com>
This commit is contained in:
Apulo 2022-10-06 11:16:13 -04:00 committed by GitHub
parent 5fad485b13
commit 7290c14531
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 8 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
config/generic-th3d-ezboard-lite-v2.0.cfg
View File

@ -1,11 +1,14 @@
# This file contains common pin mappings for the TH3D EZBoard Lite v2.
# To use this config, the firmware should be compiled for the
# STM32F405 with 12mhz Crystal, 48KiB Bootloader, and USB communication.
# To use this config, check "Enable extra low-level configuration options"
# and compile the firmware for the STM32F405 with 12mhz Crystal,
# 48KiB Bootloader, and USB communication.
# After the firmware is compiled, execute the following command
# arm-none-eabi-objcopy -O srec out/klipper.elf out/firmware.bin
# The "make flash" command does not work on this board. Instead,
# after running "make", copy the generated "out/klipper.bin" file to a
# file named "firmware.bin" on an SD card and then restart the board
# with that SD card.
# after running "make", copy the generated "out/firmware.bin" file to
# an SD card and then restart the board with that SD card.
# See docs/Config_Reference.md for a description of parameters.