3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Update G-Codes.md now that SET_VELOCITY_LIMIT can exceed config 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-06-03 14:07:56 -04:00
parent 27f8cf025e
commit 703418de01
1 changed files with 1 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
docs/G-Codes.md
View File

@ -161,8 +161,7 @@ The following standard commands are supported:
MINIMUM and/or at or below the supplied MAXIMUM. MINIMUM and/or at or below the supplied MAXIMUM.
- `SET_VELOCITY_LIMIT [VELOCITY=<value>] [ACCEL=<value>] - `SET_VELOCITY_LIMIT [VELOCITY=<value>] [ACCEL=<value>]
[ACCEL_TO_DECEL=<value>] [SQUARE_CORNER_VELOCITY=<value>]`: Modify [ACCEL_TO_DECEL=<value>] [SQUARE_CORNER_VELOCITY=<value>]`: Modify
the printer's velocity limits. Note that one may only set values the printer's velocity limits.
less than or equal to the limits specified in the config file.
- `SET_HEATER_TEMPERATURE HEATER=<heater_name> [TARGET=<target_temperature>]`: - `SET_HEATER_TEMPERATURE HEATER=<heater_name> [TARGET=<target_temperature>]`:
Sets the target temperature for a heater. If a target temperature is Sets the target temperature for a heater. If a target temperature is
not supplied, the target is 0. not supplied, the target is 0.