3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Minor wording change to thermistors in Config_Reference.md 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2020-12-07 12:12:21 -05:00
parent e83801daab
commit 6fe2ee0380
1 changed files with 7 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
docs/Config_Reference.md
View File

@ -1914,6 +1914,9 @@ section).
## Common thermistors
Common thermistors. The following parameters are available in heater
sections that use one of these sensors.
```
sensor_type:
# One of "EPCOS 100K B57560G104F", "ATC Semitec 104GT-2",
@ -1921,17 +1924,15 @@ sensor_type:
# "NTC 100K MGB18-104F39050L32", "SliceEngineering 450", or
# "TDK NTCG104LH104JT1"
sensor_pin:
# Analog input pin connected to the sensor. This parameter must be
# provided.
# Analog input pin connected to the thermistor. This parameter must
# be provided.
#pullup_resistor: 4700
# The resistance (in ohms) of the pullup attached to the thermistor.
# This parameter is only valid when the sensor is a thermistor. The
# default is 4700 ohms.
# The default is 4700 ohms.
#inline_resistor: 0
# The resistance (in ohms) of an extra (not heat varying) resistor
# that is placed inline with the thermistor. It is rare to set this.
# This parameter is only valid when the sensor is a thermistor. The
# default is 0 ohms.
# The default is 0 ohms.
```
## Common temperature amplifiers