3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Update printer-creality-cr10-smart-pro-2022.cfg (#6253) 

Clarified the necessary steps for successfully flashing the firmware to the MCU.

Signed-off-by: Doug Whitlock <doug@thewhitlock.family>
This commit is contained in:
IronAegis90 2023-06-16 16:35:12 -04:00 committed by GitHub
parent 6ce2bd61cc
commit 6cbb6f144b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 2 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
config/printer-creality-cr10-smart-pro-2022.cfg
View File

@ -6,7 +6,8 @@
# communication. Enable PA0 GPIO pin on startup. # communication. Enable PA0 GPIO pin on startup.
# #
# Flash this firmware on the MCU by copying "out/klipper.bin" to an SD # Flash this firmware on the MCU by copying "out/klipper.bin" to an SD
# card and turning the printer on with the card inserted. The firmware # card and turning the printer on by pressing and holding the power
# button with the card inserted for 10-20 seconds. The firmware
# filename must end in ".bin" and must not match the last filename # filename must end in ".bin" and must not match the last filename
# that was flashed. # that was flashed.
# #