rp2040: Support CanBoot as bootloader
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
parent
42e9adcfc9
commit
6485ff800b
|
@ -47,17 +47,32 @@ config STACK_SIZE
|
|||
int
|
||||
default 512
|
||||
|
||||
config FLASH_START
|
||||
hex
|
||||
default 0x10000100
|
||||
|
||||
|
||||
######################################################################
|
||||
# Bootloader options
|
||||
######################################################################
|
||||
|
||||
config RP2040_HAVE_STAGE2
|
||||
bool
|
||||
config RP2040_HAVE_BOOTLOADER
|
||||
bool
|
||||
default y if !RP2040_HAVE_STAGE2
|
||||
|
||||
choice
|
||||
prompt "Flash chip" if LOW_LEVEL_OPTIONS
|
||||
prompt "Bootloader offset"
|
||||
config RP2040_FLASH_START_0100
|
||||
bool "No bootloader"
|
||||
select RP2040_HAVE_STAGE2
|
||||
config RP2040_FLASH_START_4000
|
||||
bool "16KiB bootloader"
|
||||
endchoice
|
||||
config FLASH_START
|
||||
hex
|
||||
default 0x10004000 if RP2040_FLASH_START_4000
|
||||
default 0x10000100
|
||||
|
||||
choice
|
||||
prompt "Flash chip" if LOW_LEVEL_OPTIONS && RP2040_HAVE_STAGE2
|
||||
config RP2040_FLASH_W25Q080
|
||||
bool "W25Q080 with CLKDIV 2"
|
||||
config RP2040_FLASH_GENERIC_03
|
||||
|
|
|
@ -8,10 +8,6 @@ dirs-y += src/rp2040 src/generic lib/rp2040/elf2uf2 lib/fast-hash lib/can2040
|
|||
CFLAGS += -mcpu=cortex-m0plus -mthumb -Ilib/cmsis-core
|
||||
CFLAGS += -Ilib/rp2040 -Ilib/rp2040/cmsis_include -Ilib/fast-hash -Ilib/can2040
|
||||
|
||||
CFLAGS_klipper.elf += --specs=nano.specs --specs=nosys.specs
|
||||
CFLAGS_klipper.elf += -T $(OUT)src/rp2040/rp2040_link.ld
|
||||
$(OUT)klipper.elf: $(OUT)stage2.o $(OUT)src/rp2040/rp2040_link.ld
|
||||
|
||||
# Add source files
|
||||
src-y += rp2040/main.c rp2040/gpio.c rp2040/adc.c generic/crc16_ccitt.c
|
||||
src-y += generic/armcm_boot.c generic/armcm_irq.c generic/armcm_reset.c
|
||||
|
@ -38,11 +34,8 @@ $(OUT)stage2.o: lib/rp2040/boot_stage2/$(STAGE2_FILE) $(OUT)autoconf.h
|
|||
$(Q)$(OBJCOPY) -O binary $(OUT)stage2raw.o $(OUT)stage2raw.bin
|
||||
$(Q)lib/rp2040/boot_stage2/pad_checksum -s 0xffffffff $(OUT)stage2raw.bin $(OUT)stage2.S
|
||||
$(Q)$(CC) $(CFLAGS) -c $(OUT)stage2.S -o $(OUT)stage2.o
|
||||
OBJS_klipper.elf += $(OUT)stage2.o
|
||||
|
||||
# Binary output file rules
|
||||
target-y += $(OUT)klipper.uf2
|
||||
|
||||
# Binary output file rules when using stage2
|
||||
$(OUT)lib/rp2040/elf2uf2/elf2uf2: lib/rp2040/elf2uf2/main.cpp
|
||||
@echo " Building $@"
|
||||
$(Q)g++ -g -O -Ilib/rp2040 $< -o $@
|
||||
|
@ -51,11 +44,28 @@ $(OUT)klipper.uf2: $(OUT)klipper.elf $(OUT)lib/rp2040/elf2uf2/elf2uf2
|
|||
@echo " Creating uf2 file $@"
|
||||
$(Q)$(OUT)lib/rp2040/elf2uf2/elf2uf2 $< $@
|
||||
|
||||
target-$(CONFIG_RP2040_HAVE_STAGE2) += $(OUT)klipper.uf2
|
||||
rplink-$(CONFIG_RP2040_HAVE_STAGE2) := $(OUT)src/rp2040/rp2040_link.ld
|
||||
stage2-$(CONFIG_RP2040_HAVE_STAGE2) := $(OUT)stage2.o
|
||||
|
||||
# rp2040 building when using a bootloader
|
||||
$(OUT)klipper.bin: $(OUT)klipper.elf
|
||||
@echo " Creating bin file $@"
|
||||
$(Q)$(OBJCOPY) -O binary $< $@
|
||||
|
||||
target-$(CONFIG_RP2040_HAVE_BOOTLOADER) += $(OUT)klipper.bin
|
||||
rplink-$(CONFIG_RP2040_HAVE_BOOTLOADER) := $(OUT)src/generic/armcm_link.ld
|
||||
|
||||
# Set klipper.elf linker rules
|
||||
CFLAGS_klipper.elf += --specs=nano.specs --specs=nosys.specs -T $(rplink-y)
|
||||
OBJS_klipper.elf += $(stage2-y)
|
||||
$(OUT)klipper.elf: $(stage2-y) $(rplink-y)
|
||||
|
||||
# Flash rules
|
||||
lib/rp2040_flash/rp2040_flash:
|
||||
@echo " Building rp2040_flash"
|
||||
$(Q)make -C lib/rp2040_flash rp2040_flash
|
||||
|
||||
# Flash rules
|
||||
flash: $(OUT)klipper.uf2 lib/rp2040_flash/rp2040_flash
|
||||
@echo " Flashing $< to $(FLASH_DEVICE)"
|
||||
$(Q)$(PYTHON) ./scripts/flash_usb.py -t $(CONFIG_MCU) -d "$(FLASH_DEVICE)" $(if $(NOSUDO),--no-sudo) $(OUT)klipper.uf2
|
||||
|
|
|
@ -6,6 +6,7 @@
|
|||
|
||||
#include <stdint.h> // uint32_t
|
||||
#include "board/misc.h" // bootloader_request
|
||||
#include "generic/armcm_reset.h" // try_request_canboot
|
||||
#include "hardware/structs/clocks.h" // clock_hw_t
|
||||
#include "hardware/structs/pll.h" // pll_hw_t
|
||||
#include "hardware/structs/resets.h" // sio_hw
|
||||
|
@ -45,6 +46,7 @@ DECL_INIT(watchdog_init);
|
|||
void
|
||||
bootloader_request(void)
|
||||
{
|
||||
try_request_canboot();
|
||||
// Use the bootrom-provided code to reset into BOOTSEL mode
|
||||
reset_to_usb_boot(0, 0);
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue