From 5d635c525270149d45e0e33316f6986336c02e35 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 25 Feb 2018 16:00:55 -0500 Subject: [PATCH] config: Use .0025 as the default z step_distance in sample configs Don't use tiny step distances on the Z as that could cause a surprise to users that copy the config without updating all the settings. (A Z step distance that is too small would cause a high motor velocity.) A step distance of .0025 is very popular in practice, so change the default example configs to use that. Signed-off-by: Kevin O'Connor --- config/example-corexy.cfg | 2 +- config/example-multi-mcu.cfg | 2 +- config/generic-cramps.cfg | 2 +- config/generic-melzi.cfg | 2 +- config/generic-mini-rambo.cfg | 2 +- config/generic-printrboard.cfg | 2 +- config/generic-rambo.cfg | 2 +- config/generic-ramps.cfg | 2 +- config/generic-replicape.cfg | 2 +- config/printer-anet-a8-2017.cfg | 2 +- config/printer-creality-cr10-2017.cfg | 2 +- config/printer-tronxy-x5s-2017.cfg | 2 +- config/printer-wanhao-duplicator-i3-plus-2017.cfg | 2 +- 13 files changed, 13 insertions(+), 13 deletions(-) diff --git a/config/example-corexy.cfg b/config/example-corexy.cfg index 71752cd6..1c175fa9 100644 --- a/config/example-corexy.cfg +++ b/config/example-corexy.cfg @@ -35,7 +35,7 @@ homing_speed: 50 step_pin: ar46 dir_pin: ar48 enable_pin: !ar62 -step_distance: .01 +step_distance: .0025 endstop_pin: ^ar18 position_endstop: 0.5 position_max: 200 diff --git a/config/example-multi-mcu.cfg b/config/example-multi-mcu.cfg index 6c92cce6..144651c3 100644 --- a/config/example-multi-mcu.cfg +++ b/config/example-multi-mcu.cfg @@ -46,7 +46,7 @@ homing_speed: 50 step_pin: zboard:ar46 dir_pin: zboard:ar48 enable_pin: !zboard:ar62 -step_distance: 0.00025 +step_distance: .0025 endstop_pin: ^zboard:ar18 position_endstop: 0.5 position_max: 200 diff --git a/config/generic-cramps.cfg b/config/generic-cramps.cfg index 1ef2373e..5a848b2a 100644 --- a/config/generic-cramps.cfg +++ b/config/generic-cramps.cfg @@ -34,7 +34,7 @@ homing_speed: 50 step_pin: P8_19 dir_pin: P8_18 enable_pin: !P9_14 -step_distance: 0.00025 +step_distance: .0025 endstop_pin: ^P9_13 position_endstop: 0 position_max: 200 diff --git a/config/generic-melzi.cfg b/config/generic-melzi.cfg index 9df8c157..22d6f036 100644 --- a/config/generic-melzi.cfg +++ b/config/generic-melzi.cfg @@ -35,7 +35,7 @@ homing_speed: 50 step_pin: PB3 dir_pin: !PB2 enable_pin: !PA5 -step_distance: 0.00025 +step_distance: .0025 endstop_pin: ^!PC4 position_endstop: 0.5 position_max: 200 diff --git a/config/generic-mini-rambo.cfg b/config/generic-mini-rambo.cfg index 31e4af76..88b4672b 100644 --- a/config/generic-mini-rambo.cfg +++ b/config/generic-mini-rambo.cfg @@ -27,7 +27,7 @@ position_max: 210 step_pin: PC2 dir_pin: PL2 enable_pin: !PA5 -step_distance: 0.00039 +step_distance: .0025 endstop_pin: ^PB4 #endstop_pin: ^PA1 position_endstop: 0.5 diff --git a/config/generic-printrboard.cfg b/config/generic-printrboard.cfg index 25b07dca..5fd99e1e 100644 --- a/config/generic-printrboard.cfg +++ b/config/generic-printrboard.cfg @@ -32,7 +32,7 @@ homing_speed: 50 step_pin: PA4 dir_pin: !PA5 enable_pin: !PC7 -step_distance: 0.00025 +step_distance: .0025 endstop_pin: ^PE4 position_endstop: 0.5 position_max: 200 diff --git a/config/generic-rambo.cfg b/config/generic-rambo.cfg index 8933d2e9..cd09d79f 100644 --- a/config/generic-rambo.cfg +++ b/config/generic-rambo.cfg @@ -29,7 +29,7 @@ homing_speed: 50 step_pin: PC2 dir_pin: PL2 enable_pin: !PA5 -step_distance: 0.00025 +step_distance: .0025 endstop_pin: ^PB4 #endstop_pin: ^PC7 position_endstop: 0.5 diff --git a/config/generic-ramps.cfg b/config/generic-ramps.cfg index 614214d9..478f2983 100644 --- a/config/generic-ramps.cfg +++ b/config/generic-ramps.cfg @@ -30,7 +30,7 @@ homing_speed: 50 step_pin: ar46 dir_pin: ar48 enable_pin: !ar62 -step_distance: 0.00025 +step_distance: .0025 endstop_pin: ^ar18 #endstop_pin: ^ar19 position_endstop: 0.5 diff --git a/config/generic-replicape.cfg b/config/generic-replicape.cfg index de2761ab..85375907 100644 --- a/config/generic-replicape.cfg +++ b/config/generic-replicape.cfg @@ -87,7 +87,7 @@ homing_speed: 50 step_pin: P8_13 dir_pin: P8_14 enable_pin: replicape:stepper_z_enable -step_distance: 0.00025 +step_distance: .0025 endstop_pin: ^P9_13 position_endstop: 0 position_max: 200 diff --git a/config/printer-anet-a8-2017.cfg b/config/printer-anet-a8-2017.cfg index 8da6e905..c02bf3f8 100644 --- a/config/printer-anet-a8-2017.cfg +++ b/config/printer-anet-a8-2017.cfg @@ -34,7 +34,7 @@ homing_speed: 50 step_pin: PB3 dir_pin: !PB2 enable_pin: !PA5 -step_distance: 0.0025 +step_distance: .0025 endstop_pin: ^!PC4 position_endstop: 0.5 position_max: 240 diff --git a/config/printer-creality-cr10-2017.cfg b/config/printer-creality-cr10-2017.cfg index 33d1c589..ab26b5af 100644 --- a/config/printer-creality-cr10-2017.cfg +++ b/config/printer-creality-cr10-2017.cfg @@ -35,7 +35,7 @@ homing_speed: 50 step_pin: PB3 dir_pin: PB2 enable_pin: !PA5 -step_distance: 0.0025 +step_distance: .0025 endstop_pin: ^PC4 position_endstop: 0.0 position_max: 400 diff --git a/config/printer-tronxy-x5s-2017.cfg b/config/printer-tronxy-x5s-2017.cfg index 19d2b432..3a9d32fb 100644 --- a/config/printer-tronxy-x5s-2017.cfg +++ b/config/printer-tronxy-x5s-2017.cfg @@ -35,7 +35,7 @@ homing_speed: 50 step_pin: PB3 dir_pin: PB2 enable_pin: !PD6 -step_distance: 0.0025 +step_distance: .0025 endstop_pin: ^!PC4 position_endstop: 0.5 position_max: 400 diff --git a/config/printer-wanhao-duplicator-i3-plus-2017.cfg b/config/printer-wanhao-duplicator-i3-plus-2017.cfg index 3b40cf24..f0e26829 100644 --- a/config/printer-wanhao-duplicator-i3-plus-2017.cfg +++ b/config/printer-wanhao-duplicator-i3-plus-2017.cfg @@ -31,7 +31,7 @@ homing_speed: 30.0 step_pin: PK5 dir_pin: PK7 enable_pin: !PK4 -step_distance: 0.0025 +step_distance: .0025 endstop_pin: ^!PA1 position_endstop: 0.5 position_max: 180