extruder: Add nozzle and filament diameter config settings
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
parent
38ca051381
commit
5a5bd2596a
|
@ -42,6 +42,8 @@ step_pin: ar19
|
|||
dir_pin: ar18
|
||||
enable_pin: ar25
|
||||
step_distance: .004242
|
||||
nozzle_diameter: 0.500
|
||||
filament_diameter: 3.500
|
||||
max_velocity: 200000
|
||||
max_accel: 3000
|
||||
heater_pin: ar4
|
||||
|
|
|
@ -46,6 +46,8 @@ step_pin: ar26
|
|||
dir_pin: ar28
|
||||
enable_pin: !ar24
|
||||
step_distance: .0022
|
||||
nozzle_diameter: 0.400
|
||||
filament_diameter: 1.750
|
||||
max_velocity: 200
|
||||
max_accel: 3000
|
||||
heater_pin: ar10
|
||||
|
|
|
@ -109,6 +109,12 @@ step_pin: ar19
|
|||
dir_pin: ar18
|
||||
enable_pin: !ar25
|
||||
step_distance: .004242
|
||||
nozzle_diameter: 0.500
|
||||
# Diameter of the nozzle orifice (in mm). This parameter must be
|
||||
# provided.
|
||||
filament_diameter: 3.500
|
||||
# Diameter of the raw filament (in mm) as it enters the
|
||||
# extruder. This parameter must be provided.
|
||||
max_velocity: 200000
|
||||
# Maximum velocity (in mm/s) of the extruder motor for extrude only
|
||||
# moves. This parameter must be provided.
|
||||
|
|
|
@ -48,6 +48,8 @@ step_pin: PC3
|
|||
dir_pin: PL6
|
||||
enable_pin: !PA4
|
||||
step_distance: .004242
|
||||
nozzle_diameter: 0.350
|
||||
filament_diameter: 1.750
|
||||
max_velocity: 200000
|
||||
max_accel: 3000
|
||||
pressure_advance: 0.07
|
||||
|
|
|
@ -10,9 +10,11 @@ class PrinterExtruder:
|
|||
def __init__(self, printer, config):
|
||||
self.heater = heater.PrinterHeater(printer, config)
|
||||
self.stepper = stepper.PrinterStepper(printer, config, 'extruder')
|
||||
self.pressure_advance = config.getfloat('pressure_advance', 0.)
|
||||
nozzle_diameter = config.getfloat('nozzle_diameter')
|
||||
filament_diameter = config.getfloat('filament_diameter')
|
||||
self.max_e_velocity = config.getfloat('max_velocity')
|
||||
self.max_e_accel = config.getfloat('max_accel')
|
||||
self.pressure_advance = config.getfloat('pressure_advance', 0.)
|
||||
self.need_motor_enable = True
|
||||
self.extrude_pos = 0.
|
||||
def build_config(self):
|
||||
|
|
Loading…
Reference in New Issue