From 56d4422d31d360f04284bc285b13e07dceffdf84 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Mon, 24 Apr 2017 09:39:40 -0400 Subject: [PATCH] docs: Reword alternate linux machine in installation instructions Signed-off-by: Kevin O'Connor --- docs/Installation.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/Installation.md b/docs/Installation.md index d9e99819..0b9c6bc6 100644 --- a/docs/Installation.md +++ b/docs/Installation.md @@ -3,10 +3,10 @@ computer in conjunction with OctoPrint. It is recommended that a Raspberry Pi 2 or Raspberry Pi 3 computer be used as the host machine. -It should be possible to run the Klipper host software on any recent -Linux distribution, but doing so will require Linux admin knowledge to -translate these installation instructions to the particulars of that -machine. +It should be possible to run the Klipper host software on any computer +running a recent Linux distribution, but doing so will require Linux +admin knowledge to translate these installation instructions to the +particulars of that machine. Klipper currently supports Atmel ATmega based micro-controllers and Arduino Due (Atmel SAM3x8e ARM micro-controller) printers.