3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Update Fysetc S6 compilation instructions 

Signed-off-by: Wilhelm Schuster <ws@rot13.io>
This commit is contained in:
Wilhelm Schuster 2021-05-03 15:02:44 +02:00 committed by KevinOConnor
parent 1fb091c4fa
commit 4ae307b10f
2 changed files with 8 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
config/generic-fysetc-s6-v2.cfg
View File

@ -1,8 +1,7 @@
# This file contains common pin mappings for the Fysetc S6 v2 board. # This file contains common pin mappings for the Fysetc S6 v2 board. To use
# To use this config, the firmware should be compiled for the STM32F446. # this config, the firmware should be compiled for the STM32F446 with a "64KiB
# When calling "menuconfig", enable "extra low-level configuration setup" # bootloader". When calling "menuconfig", enable "extra low-level configuration
# and select the "12MHz crystal" as clock reference # setup" and select the "12MHz crystal" as clock reference.
# For flashing, write the compiled klipper.bin to memory location 0x08000000
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.

9
config/generic-fysetc-s6.cfg
View File

@ -1,8 +1,7 @@
# This file contains common pin mappings for the Fysetc S6 board. # This file contains common pin mappings for the Fysetc S6 board. To use this
# To use this config, the firmware should be compiled for the STM32F446. # config, the firmware should be compiled for the STM32F446 with a "64KiB
# When calling "menuconfig", enable "extra low-level configuration setup" # bootloader". When calling "menuconfig", enable "extra low-level configuration
# and select the "12MHz crystal" as clock reference # setup" and select the "12MHz crystal" as clock reference.
# For flashing, write the compiled klipper.bin to memory location 0x08000000
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.