From 4ae307b10f61f403ba57259c4f0e975d1db3fba6 Mon Sep 17 00:00:00 2001 From: Wilhelm Schuster Date: Mon, 3 May 2021 15:02:44 +0200 Subject: [PATCH] config: Update Fysetc S6 compilation instructions Signed-off-by: Wilhelm Schuster --- config/generic-fysetc-s6-v2.cfg | 9 ++++----- config/generic-fysetc-s6.cfg | 9 ++++----- 2 files changed, 8 insertions(+), 10 deletions(-) diff --git a/config/generic-fysetc-s6-v2.cfg b/config/generic-fysetc-s6-v2.cfg index 61fc95a2..c445b265 100644 --- a/config/generic-fysetc-s6-v2.cfg +++ b/config/generic-fysetc-s6-v2.cfg @@ -1,8 +1,7 @@ -# This file contains common pin mappings for the Fysetc S6 v2 board. -# To use this config, the firmware should be compiled for the STM32F446. -# When calling "menuconfig", enable "extra low-level configuration setup" -# and select the "12MHz crystal" as clock reference -# For flashing, write the compiled klipper.bin to memory location 0x08000000 +# This file contains common pin mappings for the Fysetc S6 v2 board. To use +# this config, the firmware should be compiled for the STM32F446 with a "64KiB +# bootloader". When calling "menuconfig", enable "extra low-level configuration +# setup" and select the "12MHz crystal" as clock reference. # See docs/Config_Reference.md for a description of parameters. diff --git a/config/generic-fysetc-s6.cfg b/config/generic-fysetc-s6.cfg index 6c3c50e9..2ba301de 100644 --- a/config/generic-fysetc-s6.cfg +++ b/config/generic-fysetc-s6.cfg @@ -1,8 +1,7 @@ -# This file contains common pin mappings for the Fysetc S6 board. -# To use this config, the firmware should be compiled for the STM32F446. -# When calling "menuconfig", enable "extra low-level configuration setup" -# and select the "12MHz crystal" as clock reference -# For flashing, write the compiled klipper.bin to memory location 0x08000000 +# This file contains common pin mappings for the Fysetc S6 board. To use this +# config, the firmware should be compiled for the STM32F446 with a "64KiB +# bootloader". When calling "menuconfig", enable "extra low-level configuration +# setup" and select the "12MHz crystal" as clock reference. # See docs/Config_Reference.md for a description of parameters.