gcode: Rename run_script() to run_script_from_command()

Emphasize that the run_script() method is only valid when run from a
g-code command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

klippy/extras/bed_tilt.py

@@ -46,7 +46,7 @@ class BedTiltCalibrate:
             desc=self.cmd_BED_TILT_CALIBRATE_help)
     cmd_BED_TILT_CALIBRATE_help = "Bed tilt calibration script"
     def cmd_BED_TILT_CALIBRATE(self, params):
-        self.gcode.run_script("G28")
+        self.gcode.run_script_from_command("G28")
         self.probe_helper.start_probe()
     def get_probed_position(self):
         kin = self.printer.lookup_object('toolhead').get_kinematics()

klippy/extras/delta_calibrate.py

@@ -28,7 +28,7 @@ class DeltaCalibrate:
             desc=self.cmd_DELTA_CALIBRATE_help)
     cmd_DELTA_CALIBRATE_help = "Delta calibration script"
     def cmd_DELTA_CALIBRATE(self, params):
-        self.gcode.run_script("G28")
+        self.gcode.run_script_from_command("G28")
         self.probe_helper.start_probe()
     def get_probed_position(self):
         kin = self.printer.lookup_object('toolhead').get_kinematics()

klippy/extras/gcode_macro.py

@@ -21,7 +21,7 @@ class GCodeMacro:
             raise self.gcode.error("Macro %s called recursively" % (self.alias,))
         self.in_script = True
         try:
-            self.gcode.run_script(self.script)
+            self.gcode.run_script_from_command(self.script)
         finally:
             self.in_script = False
 

klippy/extras/homing_override.py

@@ -54,7 +54,7 @@ class HomingOverride:
         # Perform homing
         try:
             self.in_script = True
-            self.gcode.run_script(self.script)
+            self.gcode.run_script_from_command(self.script)
         finally:
             self.in_script = False
 

klippy/extras/probe.py

@@ -106,10 +106,10 @@ class ProbeEndstopWrapper:
         self.query_endstop_wait = self.mcu_endstop.query_endstop_wait
         self.TimeoutError = self.mcu_endstop.TimeoutError
     def home_prepare(self):
-        self.gcode.run_script(self.activate_gcode)
+        self.gcode.run_script_from_command(self.activate_gcode)
         self.mcu_endstop.home_prepare()
     def home_finalize(self):
-        self.gcode.run_script(self.deactivate_gcode)
+        self.gcode.run_script_from_command(self.deactivate_gcode)
         self.mcu_endstop.home_finalize()
 
 # Wrapper that records the last XY position of a virtual endstop probe
@@ -186,7 +186,7 @@ class ProbePointsHelper:
         if self.probe is not None:
             try:
                 while self.busy:
-                    self.gcode.run_script("PROBE")
+                    self.gcode.run_script_from_command("PROBE")
                     self.cmd_NEXT({})
             except:
                 self.finalize(False)

klippy/gcode.py

@@ -235,7 +235,7 @@ class GCodeParser:
                 self.process_pending()
             self.is_processing_data = False
         return True
-    def run_script(self, script):
+    def run_script_from_command(self, script):
         prev_need_ack = self.need_ack
         try:
             self.process_commands(script.split('\n'), need_ack=False)
@@ -390,7 +390,7 @@ class GCodeParser:
         e = extruders[index]
         if self.extruder is e:
             return
-        self.run_script(self.extruder.get_activate_gcode(False))
+        self.run_script_from_command(self.extruder.get_activate_gcode(False))
         try:
             self.toolhead.set_extruder(e)
         except homing.EndstopError as e:
@@ -399,7 +399,7 @@ class GCodeParser:
         self.reset_last_position()
         self.extrude_factor = 1.
         self.base_position[3] = self.last_position[3]
-        self.run_script(self.extruder.get_activate_gcode(True))
+        self.run_script_from_command(self.extruder.get_activate_gcode(True))
     def cmd_mux(self, params):
         key, values = self.mux_commands[params['#command']]
         if None in values: