From 4acda88e8d016893e1ad2d41af483d31f6f633db Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Tue, 28 Aug 2018 15:36:53 -0400 Subject: [PATCH] docs: Fix spelling error in example-extras.cfg Fix "interally" spelling error - reported by @bistory. Signed-off-by: Kevin O'Connor --- config/example-extras.cfg | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/config/example-extras.cfg b/config/example-extras.cfg index 4559ff72..67c75000 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -544,8 +544,8 @@ # values are 1, 2, 4, 8, 16, 32, 64, 128, 256. This parameter must # be provided. #interpolate: True -# If true, enable TMC2130 step interpolation (the driver will -# interally step at a rate of 256 micro-steps). The default is True. +# If true, enable step interpolation (the driver will internally +# step at a rate of 256 micro-steps). The default is True. #run_current: # The amount of current (in amps) to configure the driver to use # during stepper movement. This parameter must be provided. @@ -602,8 +602,8 @@ # values are 1, 2, 4, 8, 16, 32, 64, 128, 256. This parameter must # be provided. #interpolate: True -# If true, enable step interpolation (the driver will interally step -# at a rate of 256 micro-steps). The default is True. +# If true, enable step interpolation (the driver will internally +# step at a rate of 256 micro-steps). The default is True. #run_current: # The amount of current (in amps) to configure the driver to use # during stepper movement. This parameter must be provided.