corexy: Initial corexy kinematic implementation
Add initial support for corexy kinematics. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
parent
57f279677f
commit
49bdc6fbd1
|
|
@ -0,0 +1,84 @@
|
||||||
|
# This file serves as documentation for config parameters of corexy
|
||||||
|
# style printers. One may copy and edit this file to configure a new
|
||||||
|
# corexy printer. Only parameters unique to corexy printers are
|
||||||
|
# described here - see the "example.cfg" file for description of
|
||||||
|
# common config parameters.
|
||||||
|
|
||||||
|
# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
|
||||||
|
# FIRST. Incorrectly configured parameters may cause damage.
|
||||||
|
|
||||||
|
# The stepper_x section is used to describe the X axis as well as the
|
||||||
|
# stepper controlling the X+Y movement
|
||||||
|
[stepper_x]
|
||||||
|
step_pin: ar54
|
||||||
|
dir_pin: ar55
|
||||||
|
enable_pin: !ar38
|
||||||
|
step_distance: .01
|
||||||
|
endstop_pin: ^ar2
|
||||||
|
homing_speed: 50.0
|
||||||
|
position_min: 0
|
||||||
|
position_endstop: 0
|
||||||
|
position_max: 200
|
||||||
|
|
||||||
|
# The stepper_y section is used to describe the Y axis as well as the
|
||||||
|
# stepper controlling the X-Y movement
|
||||||
|
[stepper_y]
|
||||||
|
step_pin: ar60
|
||||||
|
dir_pin: ar61
|
||||||
|
enable_pin: !ar56
|
||||||
|
step_distance: .01
|
||||||
|
endstop_pin: ^ar15
|
||||||
|
homing_speed: 50.0
|
||||||
|
position_min: 0
|
||||||
|
position_endstop: 0
|
||||||
|
position_max: 200
|
||||||
|
|
||||||
|
[stepper_z]
|
||||||
|
step_pin: ar46
|
||||||
|
dir_pin: ar48
|
||||||
|
enable_pin: !ar62
|
||||||
|
step_distance: .01
|
||||||
|
endstop_pin: ^ar19
|
||||||
|
position_min: 0.1
|
||||||
|
position_endstop: 0.5
|
||||||
|
position_max: 200
|
||||||
|
|
||||||
|
[extruder]
|
||||||
|
step_pin: ar26
|
||||||
|
dir_pin: ar28
|
||||||
|
enable_pin: !ar24
|
||||||
|
step_distance: .0022
|
||||||
|
nozzle_diameter: 0.400
|
||||||
|
filament_diameter: 1.750
|
||||||
|
heater_pin: ar10
|
||||||
|
sensor_type: ATC Semitec 104GT-2
|
||||||
|
sensor_pin: analog13
|
||||||
|
control: pid
|
||||||
|
pid_Kp: 22.2
|
||||||
|
pid_Ki: 1.08
|
||||||
|
pid_Kd: 114
|
||||||
|
min_temp: 0
|
||||||
|
max_temp: 250
|
||||||
|
|
||||||
|
[heater_bed]
|
||||||
|
heater_pin: ar8
|
||||||
|
sensor_type: EPCOS 100K B57560G104F
|
||||||
|
sensor_pin: analog14
|
||||||
|
control: watermark
|
||||||
|
min_temp: 0
|
||||||
|
max_temp: 130
|
||||||
|
|
||||||
|
[fan]
|
||||||
|
pin: ar9
|
||||||
|
|
||||||
|
[mcu]
|
||||||
|
serial: /dev/ttyACM0
|
||||||
|
pin_map: arduino
|
||||||
|
|
||||||
|
[printer]
|
||||||
|
kinematics: corexy
|
||||||
|
# This option must be "corexy" for corexy printers.
|
||||||
|
max_velocity: 300
|
||||||
|
max_accel: 3000
|
||||||
|
max_z_velocity: 25
|
||||||
|
max_z_accel: 30
|
||||||
|
|
@ -1,6 +1,8 @@
|
||||||
# This file serves as documentation for config parameters. One may
|
# This file serves as documentation for config parameters. One may
|
||||||
# copy and edit this file to configure a new cartesian style
|
# copy and edit this file to configure a new cartesian style
|
||||||
# printer. For delta style printers, see the "example-delta.cfg" file.
|
# printer. For delta style printers, see the "example-delta.cfg"
|
||||||
|
# file. For corexy/h-bot style printers, see the "example-corexy.cfg"
|
||||||
|
# file.
|
||||||
|
|
||||||
# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
|
# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
|
||||||
# FIRST. Incorrectly configured parameters may cause damage.
|
# FIRST. Incorrectly configured parameters may cause damage.
|
||||||
|
|
|
||||||
|
|
@ -85,7 +85,7 @@ Hardware features
|
||||||
* Smoothieboard / NXP LPC1769 (ARM cortex-M3)
|
* Smoothieboard / NXP LPC1769 (ARM cortex-M3)
|
||||||
* Unix based scheduling; Unix based real-time scheduling
|
* Unix based scheduling; Unix based real-time scheduling
|
||||||
|
|
||||||
* Support for additional kinematics: scara, corexy, etc.
|
* Support for additional kinematics: scara, etc.
|
||||||
|
|
||||||
* Support shared motor enable GPIO lines.
|
* Support shared motor enable GPIO lines.
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,164 @@
|
||||||
|
# Code for handling the kinematics of corexy robots
|
||||||
|
#
|
||||||
|
# Copyright (C) 2017 Kevin O'Connor <kevin@koconnor.net>
|
||||||
|
#
|
||||||
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
||||||
|
import logging
|
||||||
|
import stepper, homing
|
||||||
|
|
||||||
|
StepList = (0, 1, 2)
|
||||||
|
|
||||||
|
class CoreXYKinematics:
|
||||||
|
def __init__(self, printer, config):
|
||||||
|
self.steppers = [stepper.PrinterStepper(
|
||||||
|
printer, config.getsection('stepper_' + n), n)
|
||||||
|
for n in ['x', 'y', 'z']]
|
||||||
|
self.steppers[0].mcu_endstop.add_stepper(self.steppers[1].mcu_stepper)
|
||||||
|
self.steppers[1].mcu_endstop.add_stepper(self.steppers[0].mcu_stepper)
|
||||||
|
self.max_z_velocity = config.getfloat('max_z_velocity', 9999999.9)
|
||||||
|
self.max_z_accel = config.getfloat('max_z_accel', 9999999.9)
|
||||||
|
self.need_motor_enable = True
|
||||||
|
self.limits = [(1.0, -1.0)] * 3
|
||||||
|
def set_max_jerk(self, max_xy_halt_velocity, max_velocity, max_accel):
|
||||||
|
self.steppers[0].set_max_jerk(max_xy_halt_velocity, max_accel)
|
||||||
|
self.steppers[1].set_max_jerk(max_xy_halt_velocity, max_accel)
|
||||||
|
self.steppers[2].set_max_jerk(0., self.max_z_accel)
|
||||||
|
def set_position(self, newpos):
|
||||||
|
pos = (newpos[0] + newpos[1], newpos[0] - newpos[1], newpos[2])
|
||||||
|
for i in StepList:
|
||||||
|
s = self.steppers[i]
|
||||||
|
if pos[i] >= 0.:
|
||||||
|
steppos = int(pos[i]*s.inv_step_dist + 0.5)
|
||||||
|
else:
|
||||||
|
steppos = int(pos[i]*s.inv_step_dist - 0.5)
|
||||||
|
s.mcu_stepper.set_position(steppos)
|
||||||
|
def home(self, homing_state):
|
||||||
|
# Each axis is homed independently and in order
|
||||||
|
for axis in homing_state.get_axes():
|
||||||
|
s = self.steppers[axis]
|
||||||
|
self.limits[axis] = (s.position_min, s.position_max)
|
||||||
|
# Determine moves
|
||||||
|
if s.homing_positive_dir:
|
||||||
|
pos = s.position_endstop - 1.5*(
|
||||||
|
s.position_endstop - s.position_min)
|
||||||
|
rpos = s.position_endstop - s.homing_retract_dist
|
||||||
|
r2pos = rpos - s.homing_retract_dist
|
||||||
|
else:
|
||||||
|
pos = s.position_endstop + 1.5*(
|
||||||
|
s.position_max - s.position_endstop)
|
||||||
|
rpos = s.position_endstop + s.homing_retract_dist
|
||||||
|
r2pos = rpos + s.homing_retract_dist
|
||||||
|
# Initial homing
|
||||||
|
homepos = [None, None, None, None]
|
||||||
|
homepos[axis] = s.position_endstop
|
||||||
|
coord = [None, None, None, None]
|
||||||
|
coord[axis] = pos
|
||||||
|
homing_state.home(list(coord), homepos, [s], s.homing_speed)
|
||||||
|
# Retract
|
||||||
|
coord[axis] = rpos
|
||||||
|
homing_state.retract(list(coord), s.homing_speed)
|
||||||
|
# Home again
|
||||||
|
coord[axis] = r2pos
|
||||||
|
homing_state.home(
|
||||||
|
list(coord), homepos, [s], s.homing_speed/2.0, second_home=True)
|
||||||
|
if axis == 2:
|
||||||
|
# Support endstop phase detection on Z axis
|
||||||
|
coord[axis] = (s.position_endstop
|
||||||
|
+ s.get_homed_offset()*s.step_dist)
|
||||||
|
homing_state.set_homed_position(coord)
|
||||||
|
def motor_off(self, move_time):
|
||||||
|
self.limits = [(1.0, -1.0)] * 3
|
||||||
|
for stepper in self.steppers:
|
||||||
|
stepper.motor_enable(move_time, 0)
|
||||||
|
self.need_motor_enable = True
|
||||||
|
def _check_motor_enable(self, move_time, move):
|
||||||
|
if move.axes_d[0] or move.axes_d[1]:
|
||||||
|
self.steppers[0].motor_enable(move_time, 1)
|
||||||
|
self.steppers[1].motor_enable(move_time, 1)
|
||||||
|
if move.axes_d[2]:
|
||||||
|
self.steppers[2].motor_enable(move_time, 1)
|
||||||
|
need_motor_enable = False
|
||||||
|
for i in StepList:
|
||||||
|
need_motor_enable |= self.steppers[i].need_motor_enable
|
||||||
|
self.need_motor_enable = need_motor_enable
|
||||||
|
def query_endstops(self, print_time):
|
||||||
|
endstops = [(s, s.query_endstop(print_time)) for s in self.steppers]
|
||||||
|
return [(s.name, es.query_endstop_wait()) for s, es in endstops]
|
||||||
|
def _check_endstops(self, move):
|
||||||
|
end_pos = move.end_pos
|
||||||
|
for i in StepList:
|
||||||
|
if (move.axes_d[i]
|
||||||
|
and (end_pos[i] < self.limits[i][0]
|
||||||
|
or end_pos[i] > self.limits[i][1])):
|
||||||
|
if self.limits[i][0] > self.limits[i][1]:
|
||||||
|
raise homing.EndstopMoveError(
|
||||||
|
end_pos, "Must home axis first")
|
||||||
|
raise homing.EndstopMoveError(end_pos)
|
||||||
|
def check_move(self, move):
|
||||||
|
limits = self.limits
|
||||||
|
xpos, ypos = move.end_pos[:2]
|
||||||
|
if (xpos < limits[0][0] or xpos > limits[0][1]
|
||||||
|
or ypos < limits[1][0] or ypos > limits[1][1]):
|
||||||
|
self._check_endstops(move)
|
||||||
|
if not move.axes_d[2]:
|
||||||
|
# Normal XY move - use defaults
|
||||||
|
return
|
||||||
|
# Move with Z - update velocity and accel for slower Z axis
|
||||||
|
self._check_endstops(move)
|
||||||
|
z_ratio = move.move_d / abs(move.axes_d[2])
|
||||||
|
move.limit_speed(
|
||||||
|
self.max_z_velocity * z_ratio, self.max_z_accel * z_ratio)
|
||||||
|
def move(self, move_time, move):
|
||||||
|
if self.need_motor_enable:
|
||||||
|
self._check_motor_enable(move_time, move)
|
||||||
|
inv_accel = 1. / move.accel
|
||||||
|
inv_cruise_v = 1. / move.cruise_v
|
||||||
|
sxp = move.start_pos[0]
|
||||||
|
syp = move.start_pos[1]
|
||||||
|
start_pos = (sxp + syp, sxp - syp, move.start_pos[2])
|
||||||
|
exp = move.end_pos[0]
|
||||||
|
eyp = move.end_pos[1]
|
||||||
|
end_pos = (exp + eyp, exp - eyp, move.start_pos[2])
|
||||||
|
axes_d = (end_pos[0] - start_pos[0], end_pos[1] - start_pos[1],
|
||||||
|
move.axes_d[2])
|
||||||
|
for i in StepList:
|
||||||
|
if not axes_d[i]:
|
||||||
|
continue
|
||||||
|
mcu_stepper = self.steppers[i].mcu_stepper
|
||||||
|
mcu_time = mcu_stepper.print_to_mcu_time(move_time)
|
||||||
|
step_pos = mcu_stepper.commanded_position
|
||||||
|
inv_step_dist = self.steppers[i].inv_step_dist
|
||||||
|
step_offset = step_pos - start_pos[i] * inv_step_dist
|
||||||
|
steps = axes_d[i] * inv_step_dist
|
||||||
|
move_step_d = move.move_d / abs(steps)
|
||||||
|
|
||||||
|
# Acceleration steps
|
||||||
|
accel_multiplier = 2.0 * move_step_d * inv_accel
|
||||||
|
if move.accel_r:
|
||||||
|
#t = sqrt(2*pos/accel + (start_v/accel)**2) - start_v/accel
|
||||||
|
accel_time_offset = move.start_v * inv_accel
|
||||||
|
accel_sqrt_offset = accel_time_offset**2
|
||||||
|
accel_steps = move.accel_r * steps
|
||||||
|
count = mcu_stepper.step_sqrt(
|
||||||
|
mcu_time - accel_time_offset, accel_steps, step_offset
|
||||||
|
, accel_sqrt_offset, accel_multiplier)
|
||||||
|
step_offset += count - accel_steps
|
||||||
|
mcu_time += move.accel_t
|
||||||
|
# Cruising steps
|
||||||
|
if move.cruise_r:
|
||||||
|
#t = pos/cruise_v
|
||||||
|
cruise_multiplier = move_step_d * inv_cruise_v
|
||||||
|
cruise_steps = move.cruise_r * steps
|
||||||
|
count = mcu_stepper.step_factor(
|
||||||
|
mcu_time, cruise_steps, step_offset, cruise_multiplier)
|
||||||
|
step_offset += count - cruise_steps
|
||||||
|
mcu_time += move.cruise_t
|
||||||
|
# Deceleration steps
|
||||||
|
if move.decel_r:
|
||||||
|
#t = cruise_v/accel - sqrt((cruise_v/accel)**2 - 2*pos/accel)
|
||||||
|
decel_time_offset = move.cruise_v * inv_accel
|
||||||
|
decel_sqrt_offset = decel_time_offset**2
|
||||||
|
decel_steps = move.decel_r * steps
|
||||||
|
count = mcu_stepper.step_sqrt(
|
||||||
|
mcu_time + decel_time_offset, decel_steps, step_offset
|
||||||
|
, decel_sqrt_offset, -accel_multiplier)
|
||||||
|
|
@ -4,7 +4,7 @@
|
||||||
#
|
#
|
||||||
# This file may be distributed under the terms of the GNU GPLv3 license.
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
||||||
import math, logging
|
import math, logging
|
||||||
import cartesian, delta, extruder
|
import cartesian, corexy, delta, extruder
|
||||||
|
|
||||||
# Common suffixes: _d is distance (in mm), _v is velocity (in
|
# Common suffixes: _d is distance (in mm), _v is velocity (in
|
||||||
# mm/second), _v2 is velocity squared (mm^2/s^2), _t is time (in
|
# mm/second), _v2 is velocity squared (mm^2/s^2), _t is time (in
|
||||||
|
|
@ -185,6 +185,7 @@ class ToolHead:
|
||||||
if self.extruder is None:
|
if self.extruder is None:
|
||||||
self.extruder = extruder.DummyExtruder()
|
self.extruder = extruder.DummyExtruder()
|
||||||
kintypes = {'cartesian': cartesian.CartKinematics,
|
kintypes = {'cartesian': cartesian.CartKinematics,
|
||||||
|
'corexy': corexy.CoreXYKinematics,
|
||||||
'delta': delta.DeltaKinematics}
|
'delta': delta.DeltaKinematics}
|
||||||
self.kin = config.getchoice('kinematics', kintypes)(printer, config)
|
self.kin = config.getchoice('kinematics', kintypes)(printer, config)
|
||||||
self.max_speed = config.getfloat('max_velocity')
|
self.max_speed = config.getfloat('max_velocity')
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue