3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Update MCU_Commands with schedule_soft_pwm_out changes 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-08-01 00:23:09 -04:00
parent c356e8362d
commit 485164b8b3
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
docs/MCU_Commands.md
View File

@ -140,9 +140,9 @@ This section lists some commonly used config commands.
special hardware support (other than the ability to configure the
pin as a digital output GPIO). Because the output switching is
implemented in the micro-controller software, it is recommended that
the cycle_ticks parameter correspond to a time of 10ms or
greater. See the description of the 'set_pwm_out' and
'config_digital_out' commands for parameter description.
the cycle_ticks parameter correspond to a time of 10ms or greater.
See the description of the 'set_pwm_out' and 'config_digital_out'
commands for parameter description.
* `config_analog_in oid=%c pin=%u` : This command is used to configure
a pin in analog input sampling mode. Once configured, the pin can be
@ -203,7 +203,7 @@ only of interest to developers looking to gain insight into Klipper.
a hardware PWM output pin. See the 'schedule_digital_out' and
'config_pwm_out' commands for more info.
* `schedule_soft_pwm_out oid=%c clock=%u value=%hu` : Schedules a
* `schedule_soft_pwm_out oid=%c clock=%u on_ticks=%u` : Schedules a
change to a software PWM output pin. See the 'schedule_digital_out'
and 'config_soft_pwm_out' commands for more info.