From 4811b58b396f2978ff0b20d5fa1652900e97e9e9 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Wed, 16 Oct 2019 16:35:32 -0400 Subject: [PATCH] docs: Update Manual_Level.md with recent config changes The sample count and associated settings are no longer in the screws_tilt_adjust config section - they are now in the probe config section. Remove them from the guide. Reported by @theopensourcerer. Signed-off-by: Kevin O'Connor --- docs/Manual_Level.md | 6 ------ 1 file changed, 6 deletions(-) diff --git a/docs/Manual_Level.md b/docs/Manual_Level.md index 8cf73e9b..a0e90c27 100644 --- a/docs/Manual_Level.md +++ b/docs/Manual_Level.md @@ -157,15 +157,9 @@ screw4: -5,190 screw4_name: rear left screw horizontal_move_z: 10. speed: 50. -samples: 3 -sample_retract_dist: 2. -samples_result: median screw_thread: CW-M3 ``` -One can indicate the number of times to repeat probe on each screw and -if the value is the median or the average read probe. - The screw1 is always the reference point for the others, so the system assumes that screw1 is in the correct height. Then to use this feature you must preform every time `G28` before