3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Add AHT10 temperature sensor doc section in Config_Reference.md (followup #6138) (#6167) 

Followed general outline used by HTU21D and BME280.

Signed-off-by: Scott Mudge <mail@scottmudge.com>
This commit is contained in:
Scott Mudge 2023-04-15 19:17:54 -04:00 committed by GitHub
parent a8b1b0ef05
commit 4748dffd7a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 23 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
docs/Config_Reference.md
View File

@ -2375,6 +2375,29 @@ sensor_type: BME280
# above parameters.
```
### AHT10 temperature sensor
AHT10 two wire interface (I2C) environmental sensor.
Note that these sensors are not intended for use with extruders and
heater beds, but rather for monitoring ambient temperature (C) and
relative humidity. See
[sample-macros.cfg](../config/sample-macros.cfg) for a gcode_macro
that may be used to report humidity in addition to temperature.
```
sensor_type: AHT10
#i2c_address:
# Default is 56 (0x38). Some AHT10 sensors give the option to use
# 57 (0x39) by moving a resistor.
#i2c_mcu:
#i2c_bus:
#i2c_speed:
# See the "common I2C settings" section for a description of the
# above parameters.
#aht10_report_time:
# Interval in seconds between readings. Default is 30, minimum is 5
```
### HTU21D sensor
HTU21D family two wire interface (I2C) environmental sensor. Note that