3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Use a markdown link to docs/prints/square.stl 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2017-04-27 11:34:52 -04:00
parent a97e074022
commit 4096745a58
1 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
docs/Pressure_Advance.md
View File

@ -16,13 +16,13 @@ Start by changing the extruder section of the config file so that
pressure_advance is set to 0.0. (Make sure to issue a RESTART command
after each update to the config file so that the new configuration
takes effect.) Then print at least 10 layers of a large hollow square
at high speed (eg, 100mm/s). See **docs/prints/square.stl** file for
an STL file that one may use. While the object is printing, make a
note of which direction the head is moving during external
perimeters. What many people see here is blobbing occurring at the
corners - extra filament at the corner in the direction the head
travels followed by a possible lack of filament on the side
immediately after that corner:
at high speed (eg, 100mm/s). See
[docs/prints/square.stl](prints/square.stl) file for an STL file that
one may use. While the object is printing, make a note of which
direction the head is moving during external perimeters. What many
people see here is blobbing occurring at the corners - extra filament
at the corner in the direction the head travels followed by a possible
lack of filament on the side immediately after that corner:
![corner-blob](img/corner-blob.jpg)