3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Use a markdown link to docs/prints/square.stl 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2017-04-27 11:34:52 -04:00
parent a97e074022
commit 4096745a58
1 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
docs/Pressure_Advance.md
View File

@ -16,13 +16,13 @@ Start by changing the extruder section of the config file so that
pressure_advance is set to 0.0. (Make sure to issue a RESTART command pressure_advance is set to 0.0. (Make sure to issue a RESTART command
after each update to the config file so that the new configuration after each update to the config file so that the new configuration
takes effect.) Then print at least 10 layers of a large hollow square takes effect.) Then print at least 10 layers of a large hollow square
at high speed (eg, 100mm/s). See **docs/prints/square.stl** file for at high speed (eg, 100mm/s). See
an STL file that one may use. While the object is printing, make a [docs/prints/square.stl](prints/square.stl) file for an STL file that
note of which direction the head is moving during external one may use. While the object is printing, make a note of which
perimeters. What many people see here is blobbing occurring at the direction the head is moving during external perimeters. What many
corners - extra filament at the corner in the direction the head people see here is blobbing occurring at the corners - extra filament
travels followed by a possible lack of filament on the side at the corner in the direction the head travels followed by a possible
immediately after that corner: lack of filament on the side immediately after that corner:
![corner-blob](img/corner-blob.jpg) ![corner-blob](img/corner-blob.jpg)