config: Fix wording of serial port selection on recent creality configs

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2022-07-21 21:56:46 -04:00
parent 0c74b3d8bf
commit 407be177d5
3 changed files with 6 additions and 5 deletions

View File

@ -2,8 +2,8 @@
# S1. To use this config, check the STM32 Chip on the V2.4S1 Board # S1. To use this config, check the STM32 Chip on the V2.4S1 Board
# then during "make menuconfig" select either the STM32F103 with a # then during "make menuconfig" select either the STM32F103 with a
# "28KiB bootloader" or select the STM32F401 with a "64KiB bootloader" # "28KiB bootloader" or select the STM32F401 with a "64KiB bootloader"
# and serial (on USB PA10/PA9) communication for both depending on the # and serial (on USART1 PA10/PA9) communication for both depending on
# STM32 Chip installed on your printers Motherboard. # the STM32 chip installed on your printer's motherboard.
# If you prefer a direct serial connection, in "make menuconfig" # If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select # select "Enable extra low-level configuration options" and select

View File

@ -2,8 +2,8 @@
# S1 Pro. To use this config, check the STM32 Chip on the V2.4S1 Board # S1 Pro. To use this config, check the STM32 Chip on the V2.4S1 Board
# then during "make menuconfig" select either the STM32F103 with a # then during "make menuconfig" select either the STM32F103 with a
# "28KiB bootloader" or select the STM32F401 with a "64KiB bootloader" # "28KiB bootloader" or select the STM32F401 with a "64KiB bootloader"
# and serial (on USB PA10/PA9) communication for both depending on the # and serial (on USART1 PA10/PA9) communication for both depending on
# STM32 Chip installed on your printers Motherboard. # the STM32 chip installed on your printer's motherboard.
# If you prefer a direct serial connection, in "make menuconfig" # If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select # select "Enable extra low-level configuration options" and select

View File

@ -2,7 +2,8 @@
# with CR-FDM-v2.4.S1.200 motherboard. # with CR-FDM-v2.4.S1.200 motherboard.
# To use this config, during "make menuconfig" select the STM32F401 # To use this config, during "make menuconfig" select the STM32F401
# with a "64KiB bootloader" and serial (on USB PA10/PA9) communication. # with a "64KiB bootloader" and serial (on USART1 PA10/PA9)
# communication.
# If you prefer a direct serial connection, in "make menuconfig" # If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select # select "Enable extra low-level configuration options" and select