linux: Minor formatting, variable name, and error reporting changes

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-04-19 12:58:22 -04:00
parent 308f0338cf
commit 3dadcd3614
1 changed files with 53 additions and 62 deletions

View File

@ -1,28 +1,23 @@
// Very basic support via a Linux gpiod device
//
// Copyright (C) 2017-2018 Kevin O'Connor <kevin@koconnor.net>
// Copyright (C) 2017-2021 Kevin O'Connor <kevin@koconnor.net>
//
// This file may be distributed under the terms of the GNU GPLv3 license.
#include "autoconf.h"
#include "gpio.h"
#include "command.h" // shutdown
#include "sched.h" // shutdown
#include <fcntl.h> // open
#include <stdio.h> // snprintf
#include <string.h> // memset
#include <stdlib.h> // atexit
#include <string.h> // memset
#include <sys/ioctl.h> // ioctl
#include <unistd.h> // close
#include </usr/include/linux/gpio.h> // GPIOHANDLE_REQUEST_OUTPUT
#include "command.h" // shutdown
#include "gpio.h" // gpio_out_write
#include "internal.h" // report_errno
#include "sched.h" // sched_shutdown
#include </usr/include/linux/gpio.h>
#include <sys/ioctl.h>
#include <unistd.h>
#define CHIP_FILE_NAME "/dev/gpiochip%u"
#define GPIO_CONSUMER "klipper"
DECL_ENUMERATION_RANGE("pin", "gpio0", GPIO(0, 0), MAX_GPIO_LINES);
DECL_ENUMERATION_RANGE("pin", "gpiochip0/gpio0", GPIO(0, 0), MAX_GPIO_LINES);
DECL_ENUMERATION_RANGE("pin", "gpiochip1/gpio0", GPIO(1, 0), MAX_GPIO_LINES);
@ -39,43 +34,40 @@ struct gpio_line {
int fd;
int state;
};
static struct gpio_line lines[8*MAX_GPIO_LINES];
static int gpio_chip_fd[8] = { -1 };
static struct gpio_line gpio_lines[8 * MAX_GPIO_LINES];
static int gpio_chip_fd[8] = { -1, -1, -1, -1, -1, -1, -1, -1 };
static int
get_chip_fd(uint8_t chipId) {
char chipFilename[64],errorMessage[256];
int i = 0;
if (gpio_chip_fd[chipId] <= 0) {
snprintf(chipFilename,sizeof(chipFilename), CHIP_FILE_NAME, chipId);
if(access(chipFilename, F_OK) < 0){
snprintf(errorMessage,sizeof(errorMessage),
"%s not found!",chipFilename);
report_errno(errorMessage,-1);
get_chip_fd(uint8_t chipId)
{
if (gpio_chip_fd[chipId] >= 0)
return gpio_chip_fd[chipId];
char chipFilename[64];
snprintf(chipFilename, sizeof(chipFilename), "/dev/gpiochip%u", chipId);
int ret = access(chipFilename, F_OK);
if (ret < 0) {
report_errno("gpio access", ret);
shutdown("GPIO chip device not found");
}
gpio_chip_fd[chipId] = open(chipFilename,O_RDWR | O_CLOEXEC);
if (gpio_chip_fd[chipId] < 0) {
snprintf(errorMessage,sizeof(errorMessage),
"Unable to open GPIO %s",chipFilename);
report_errno(errorMessage,-1);
int fd = open(chipFilename, O_RDWR | O_CLOEXEC);
if (fd < 0) {
report_errno("gpio open", fd);
shutdown("Unable to open GPIO chip device");
}
for (i=0; i<MAX_GPIO_LINES; ++i) {
lines[GPIO(chipId,i)].offset = i;
lines[GPIO(chipId,i)].fd = -1;
lines[GPIO(chipId,i)].chipid = chipId;
gpio_chip_fd[chipId] = fd;
int i;
for (i=0; i<MAX_GPIO_LINES; i++) {
gpio_lines[GPIO(chipId, i)].offset = i;
gpio_lines[GPIO(chipId, i)].fd = -1;
gpio_lines[GPIO(chipId, i)].chipid = chipId;
}
}
return gpio_chip_fd[chipId];
return fd;
}
struct gpio_out
gpio_out_setup(uint32_t pin, uint8_t val)
{
struct gpio_line* line = &lines[pin];
struct gpio_line *line = &gpio_lines[pin];
line->offset = GPIO2PIN(pin);
line->chipid = GPIO2PORT(pin);
struct gpio_out g = { .line = line };
@ -84,7 +76,7 @@ gpio_out_setup(uint32_t pin, uint8_t val)
}
static void
gpio_release_line(struct gpio_line* line)
gpio_release_line(struct gpio_line *line)
{
if (line->fd > 0) {
close(line->fd);
@ -95,18 +87,18 @@ gpio_release_line(struct gpio_line* line)
void
gpio_out_reset(struct gpio_out g, uint8_t val)
{
int rv;
struct gpiohandle_request req;
gpio_release_line(g.line);
struct gpiohandle_request req;
memset(&req, 0, sizeof(req));
req.lines = 1;
req.flags = GPIOHANDLE_REQUEST_OUTPUT;
req.lineoffsets[0] = g.line->offset;
req.default_values[0] = !!val;
strncpy(req.consumer_label,GPIO_CONSUMER,sizeof(req.consumer_label) - 1);
rv = ioctl(get_chip_fd(g.line->chipid), GPIO_GET_LINEHANDLE_IOCTL, &req);
if (rv < 0) {
report_errno("gpio_out_reset get line",rv);
strncpy(req.consumer_label, GPIO_CONSUMER, sizeof(req.consumer_label) - 1);
int fd = get_chip_fd(g.line->chipid);
int ret = ioctl(fd, GPIO_GET_LINEHANDLE_IOCTL, &req);
if (ret < 0) {
report_errno("gpio_out_reset get line", ret);
shutdown("Unable to open out GPIO chip line");
}
set_close_on_exec(req.fd);
@ -125,34 +117,33 @@ gpio_out_write(struct gpio_out g, uint8_t val)
}
void
gpio_out_toggle(struct gpio_out g)
gpio_out_toggle_noirq(struct gpio_out g)
{
gpio_out_write(g,!g.line->state);
gpio_out_write(g, !g.line->state);
}
void
gpio_out_toggle_noirq(struct gpio_out g)
gpio_out_toggle(struct gpio_out g)
{
gpio_out_toggle(g);
gpio_out_toggle_noirq(g);
}
struct gpio_in
gpio_in_setup(uint32_t pin, int8_t pull_up)
{
struct gpio_line* line = &lines[pin];
struct gpio_line *line = &gpio_lines[pin];
line->offset = GPIO2PIN(pin);
line->chipid = GPIO2PORT(pin);
struct gpio_in g = { .line = line };
gpio_in_reset(g,pull_up);
gpio_in_reset(g, pull_up);
return g;
}
void
gpio_in_reset(struct gpio_in g, int8_t pull_up)
{
int rv;
struct gpiohandle_request req;
gpio_release_line(g.line);
struct gpiohandle_request req;
memset(&req, 0, sizeof(req));
req.lines = 1;
req.flags = GPIOHANDLE_REQUEST_INPUT;
@ -164,11 +155,11 @@ gpio_in_reset(struct gpio_in g, int8_t pull_up)
}
#endif
req.lineoffsets[0] = g.line->offset;
strncpy(req.consumer_label,GPIO_CONSUMER,sizeof(req.consumer_label) - 1);
rv = ioctl(
get_chip_fd(g.line->chipid),GPIO_GET_LINEHANDLE_IOCTL,&req);
if (rv < 0) {
report_errno("gpio_in_reset get line",rv);
strncpy(req.consumer_label, GPIO_CONSUMER, sizeof(req.consumer_label) - 1);
int fd = get_chip_fd(g.line->chipid);
int ret = ioctl(fd, GPIO_GET_LINEHANDLE_IOCTL, &req);
if (ret < 0) {
report_errno("gpio_in_reset get line", ret);
shutdown("Unable to open in GPIO chip line");
}
set_close_on_exec(req.fd);