3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Reword the min_temp/max_temp description in example.cfg 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-03-12 14:37:02 -04:00
parent e336c24665
commit 3a75748762
1 changed files with 8 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
config/example.cfg
View File

@ -186,11 +186,15 @@ pid_Kd: 114
# The minimum temperature (in Celsius) at which extruder move
# commands may be issued. The default is 170 Celsius.
min_temp: 0
# Minimum temperature in Celsius (mcu will shutdown if not
# met). This parameter must be provided.
max_temp: 210
# Maximum temperature (mcu will shutdown if temperature is above
# this value). This parameter must be provided.
# The maximum range of valid temperatures (in Celsius) that the
# heater must remain within. This controls a safety feature
# implemented in the micro-controller code - should the measured
# temperature ever fall outside this range then the micro-controller
# will go into a shutdown state. This check can help detect some
# heater and sensor hardware failures. Set this range just wide
# enough so that reasonable temperatures do not result in an
# error. These parameters must be provided.
# The heater_bed section describes a heated bed (if present - omit
# section if not present).