3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Add CLEAR_PAUSE to G-Codes.md 

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
This commit is contained in:
Arksine 2019-06-23 07:36:06 -04:00 committed by KevinOConnor
parent 35a45e2446
commit 3a3dfd51b9
1 changed files with 4 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/G-Codes.md
View File

@ -430,6 +430,10 @@ is enabled:
- `RESUME [VELOCITY=<value>]`: Resumes the print from a pause, first restoring - `RESUME [VELOCITY=<value>]`: Resumes the print from a pause, first restoring
the previously captured position. The VELOCITY parameter determines the speed the previously captured position. The VELOCITY parameter determines the speed
at which the tool should return to the original captured position. at which the tool should return to the original captured position.
- `CLEAR_PAUSE`: Clears the current paused state without resuming the print.
This is useful if one decides to cancel a print after a PAUSE. It is recommended
to add this to your start gcode to make sure the paused state is fresh for each
print.
## Filament Sensor ## Filament Sensor