3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Minor updates to sdcard_loop documentation 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-05-26 12:05:49 -04:00
parent 913649de2e
commit 391ebd32c1
2 changed files with 14 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
docs/Config_Reference.md
View File

@ -1319,8 +1319,9 @@ a belt printer, can find use in looping sections of the sdcard file.
(For example, to print the same part over and over, or repeat the (For example, to print the same part over and over, or repeat the
a section of a part for a chain or other repeated pattern). a section of a part for a chain or other repeated pattern).
See the `config/sample-macros.cfg` file for a Marlin compatible M808 See the [command reference](G-Codes.md#sdcard-loop) for supported
G-Code macro. commands. See the [sample-macros.cfg](../config/sample-macros.cfg)
file for a Marlin compatible M808 G-Code macro.
``` ```
[sdcard_loop] [sdcard_loop]

18
docs/G-Codes.md
View File

@ -66,13 +66,6 @@ In addition, the following extended commands are availble when the
- Load a file and start SD print: `SDCARD_PRINT_FILE FILENAME=<filename>` - Load a file and start SD print: `SDCARD_PRINT_FILE FILENAME=<filename>`
- Unload file and clear SD state: `SDCARD_RESET_FILE` - Unload file and clear SD state: `SDCARD_RESET_FILE`
When the [sdcard_loop config section](Config_Reference.md#sdcard_loop) is
enabled, the following extended commands are available.
- Begin a looped section in the SD print: `SDCARD_LOOP_BEGIN COUNT=<count>`
- A count of 0 indicates that the section should be looped indefinately.
- End a looped section in the SD print: `SDCARD_LOOP_END`
- Complete existing loops without further iterations: `SDCARD_LOOP_DESIST`
## G-Code arcs ## G-Code arcs
The following standard G-Code commands are available if a The following standard G-Code commands are available if a
@ -541,6 +534,17 @@ enabled:
future boundary checks; issue a G28 afterwards to reset the future boundary checks; issue a G28 afterwards to reset the
kinematics. kinematics.
## SDcard loop
When the [sdcard_loop config section](Config_Reference.md#sdcard_loop)
is enabled, the following extended commands are available:
- `SDCARD_LOOP_BEGIN COUNT=<count>`: Begin a looped section in the SD
print. A count of 0 indicates that the section should be looped
indefinately.
- `SDCARD_LOOP_END`: End a looped section in the SD print.
- `SDCARD_LOOP_DESIST`: Complete existing loops without further
iterations.
## Send message (respond) to host ## Send message (respond) to host
The following commands are availabe when the The following commands are availabe when the