3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Note adc_voltage and pullup_resistance in adc_temperature module 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-09-11 00:31:48 -04:00
parent 49779f13a2
commit 361de30ad1
1 changed files with 7 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
config/example-extras.cfg
View File

@ -1527,8 +1527,10 @@
#voltage2: #voltage2:
#... #...
# A set of temperatures (in Celsius) and voltages (in Volts) to use # A set of temperatures (in Celsius) and voltages (in Volts) to use
# as reference when converting a temperature. At least two # as reference when converting a temperature. A heater section using
# measurements must be provided. # this sensor may also specify an adc_voltage parameter to define
# the ADC comparison voltage (see example.cfg for details). At least
# two measurements must be provided.
#temperature1: #temperature1:
#resistance1: #resistance1:
#temperature2: #temperature2:
@ -1536,7 +1538,9 @@
#... #...
# Alternatively one may specify a set of temperatures (in Celsius) # Alternatively one may specify a set of temperatures (in Celsius)
# and resistance (in Ohms) to use as reference when converting a # and resistance (in Ohms) to use as reference when converting a
# temperature. At least two measurements must be provided. # temperature. A heater section using this sensor may also specify a
# pullup_resistor parameter (see example.cfg for details). At least
# two measurements must be provided.
# MAXxxxxx serial peripheral interface (SPI) temperature based # MAXxxxxx serial peripheral interface (SPI) temperature based